I've written a function macro that results in a dialog box popping up as in ....Application.Run "showsampdat"
What is the general Syntax for adding a macro line that will enact the OK Button on the Dialog box so that the user will never see the dialog box but the OK button functions?
I have to design an input user form (a button that opens an input box or dialog box), which asks user to "Enter number of "columns"".
User enters a number i.e. 2 or 3 etc
It then asks user for the headings of these coulmns and places first column heading in A1 and second column heading in B1, third in C1 and so on ...
I'm building my first Add-In, which I'm using to gather all Sub's that I've created through my small VBA writting career. The thing is that when I write new code and some reason exit Excel and forget to save the XLA, obviously the code is lost. I've used:
View 4 Replies View RelatedI have some code in a standard module. When I try to run it, it does not appear in the dialog box. The code's below.
Code:
Sub CopyCat(ByVal Target As Excel.Range)
If Target.Column 21 Then Exit Sub
If Target.Value = "Y" Then
Cells(Target.Row, "A").Copy Destination:=Sheets("Sheet2").Range("A" & Rows.Count).End(xlUp).Offset(1)
Cells(Target.Row, "B").Copy Destination:=Sheets("Sheet2").Range("B" & Rows.Count).End(xlUp).Offset(1)
Cells(Target.Row, "C").Copy Destination:=Sheets("Sheet2").Range("C" & Rows.Count).End(xlUp).Offset(1)
Cells(Target.Row, "D").Copy Destination:=Sheets("Sheet2").Range("D" & Rows.Count).End(xlUp).Offset(1)
Cells(Target.Row, "E").Copy Destination:=Sheets("Sheet2").Range("E" & Rows.Count).End(xlUp).Offset(1)
End If
End Sub
ive created a spreedsheet for work calculating money etc from different tills. is there a way i can have a box appear when the spreadsheet is opened asking for particular information to be entered.
EXAMPLE: ....
I have created a worksheet with Excel Dialog worksheet. I have Edit Boxes and have input data into them. Is it possible to add these data and put the result in another Edit Box,
View 9 Replies View RelatedI have created a dialog box for entering data into once that data has been entered i want the dialog box to store the data into a separate worksheet at A2 in then want the dialog box to clear and reappear ready for new data to be entered. This new data would then need to be entered at A3 etc etc etc. Is this possible and how would i go about doing this.
View 9 Replies View RelatedI am very sure that I have deleted all my macro in my excel spreadsheet and saved. However, when I tried to open the file, the macro dialog prompt me again..... I have press alt F11 and confirmed that there is no macro.
View 6 Replies View RelatedI'm modifying a template that originally shipped with Excel 2003 (I have not upgraded to 2007). In the template, there is a pop-up box (not a dialog box) that shows up when I'm on certain cells. I've attached an image of it. It's the yellow box containing the words "Company Information..." etc. I cannot find any way to remove it! It's not a comment, and selecting it doesn't allow you to edit it. What is it, and does anyone know how to remove it?
View 2 Replies View RelatedI would like a macro to print 2 sheets in a workbook. I can write the macro that will select the sheets I want, but I don't want it to just go and print because depending on if the user wants it printed in color, b&w, etc.
they have to choose a different color. What code do I use to open the print dialog box?
I want to show the insert symbol dialog through vba code. How?
View 12 Replies View RelatedIs there a dialog box like the one used in GetOpenFilename that can be used to select a directory?
I'm trying to select a directory/folder which will change each month but the macro selects the files from inside the folder once it's specified. I don't need the name of the current path; the path name needs to be able to be selected.
what command can i use to bring up the save as dialog box ( where to name your saved file) if my file is already named?
View 2 Replies View RelatedHow can this be edited so when the savebox comes up when i hit save it saves the file but when i hit cancel it goes to error:
View 14 Replies View RelatedI'm hoping someone can stop me going crazy with what should be something very simple. To make things easier at the end of my code, all I'd like to do is bring up the SaveAs dialog box and have it default to a specific directory so that the user doesn't have to click through the mountain of various files and folders we have.
View 6 Replies View RelatedI attached a file with macro7 that prompts the user for text that will get rotated and inserted into the top left corner. The text is in the form "batch xxxx." I need a carriage return between the word "batch" and the numeric string. I guess the input box should have two lines instead of one.
the code does some other stuff which is why it takes a while to execute ....
Quick VBA question: does anyone know how to let VBA open the Insert symbol dialog box?
View 9 Replies View RelatedI am looking for code that when cmdfile is click, it will open up the 'open file' dialog box, and go to a specified directory on the pc, and list ALL files in that folder, but not open it. I want the user to select the file manually.
I found the following code on the forums, but don't know if it is relavent in my case
Const myDir As String = "C:NAVIGATIONPERSONAL
ussNLN"
I have the a spreadsheet with macro which copies the first sheet and renames. This I have working OK. I then have within this macro the following code to delete the contents of a cell (the date) and have the macro open a Input box and enter that date in the same cell. If no date is entered in the Input Box, then I want todays date entered.
The date from the Input Box works except every second sheet created reverts from the date format dd/mm/yy to mm/dd/yy.
If no date is entered in the dialog box, todays date does not activate.
I have checked the formatting of the cell and windows.
ActiveSheet.Unprotect ("Password")
ActiveSheet.Range("J281").ClearContents
ActiveSheet.Range("J281") = InputBox("Enter Date if not todays date", "Type:")
If Range("J281") = "" Then
Range("J281") = Date
End If
ActiveSheet.Protect ("Password")
I have code below which brings up a dialogue box and allows me to sect an excel file. Is there a way to change this code so the dialogue box will ask me to select a folder instead? I want to be able to select a folder and the rest of the code will open the files in the folder.
Sub Euro()
Dim wb1 As Workbook
Dim sFileName1 As String
myMsg = "Please Select Euromcontact Value File"
Response = MsgBox(myMsg, vbExclamation + vbOKOnly, myTitle)
sFileName1 = Application. GetOpenFilename
If sFileName1 = "False" Then Exit Sub
Set wb1 = Workbooks.Open(Filename:=sFileName1)
With wb1
.Activate
End With
End Sub
How can i call the Save As dialog box from a macro, and pre-populate the filename field with a cell value from the workbook? I have tried this code
With Application.Dialogs(xlDialogFileSaveAs)
.Name = Sheets("Calcs").Range("b37").Value
.Show
End With
with the cell reference being what i want to show in the filename box. Each time i run it, i get an error message, "run time error 1004, application defind or object defined error"
how to redirect the Hyperlink Dialog window to a another folder.
Referring to the attached .jpg the 'Look in:' combobox points to the same folder as where the excel file resides. I would like this dialog box to open up with the PDF Drawings folder.
I have tried with the following code (and it shows the address in the 'Address' combo) but does not work.
vntContent = ActiveCell.Value
ActiveCell.Hyperlinks.Add Anchor:=Selection, Address:=PDF_Address, _
TextToDisplay:=vntContent
' PDF_Address = "\SACUD01SATechServMasterfilesDrawingsPDF
' Drawings"
I am using Excel 2003
I need to modify 2 Excel built-in dialogs via VBA. Here is the first dialog box:
Application.Dialogs(xlDialogWorkbookCopy).Show
First, in the "Move or Copy" window, where it says, "move selected sheets to book:" I'd like the default selection to be the open workbook instead of "(new book)", which is the current default. How can this be done?
Second, I'd like to remove the check box so there is no option to copy visible, however, I need to add the code in the sub procedure to make a copy. How can I do this?
The second dialog box I need to modify is this one:
Application.Dialogs(xlDialogPageSetup).Show.
What I need this to do is open with the tab" Header/Footer" visible as a default, or, better still, have only the "Header/Footer" tab available and the other 3 tabs not there at all. How do I do this?
I have made a dialog box open using VBA to select some file,
Function FSel()
filetoopen = Application. GetOpenFilename("Document Files (*.xls), *.xls", 1)
Workbooks.Open Filename:=filetoopen
End Function
I need to activate the sheet which is selected in that string "filetoopen".I am not getting the way to do this ,the normal Windows(" " ).Activate is not working with variable as input.
I am placing the funcation Fsel in a loop so each time it asks for the file to open which is not proper,so i wanted to activate sheet .
I am working with Excel 2003 and find that the default "Protect Sheet" dialog box opens with a default of both the "Select locked cells" as well as the "Select unlocked cells" check boxes marked. Is there a way to change this default?
View 2 Replies View RelatedDid the name for Common Dialog change for Excel 2007 and if, then what is this new name?
View 3 Replies View RelatedI have a macro that's running quite well and is cross-posted here:
[url]
What I need to do is allow for user input. I want to create a dialog box that pops up and asks for an input range, when the user runs the macro. Values can only be from 1 - 50. And the user won't be allowed to select broken sequences, like 6, 9, 12-15.
They would have to be continuous, i.e. 6 - 15, etc. I'm still very new to VBA. I can play with the control toolbox, but I have very little understanding of how to interface with the components that I'm adding/creating. Once I have that range, I want to use the inputs as the 'start' and 'stop' points for my loop. So I need to capture the values and pass them as input parameters, I'm guessing.
I can modify the loop to accept the inputs, I'm just not sure how to capture them from a user input dialog box.
I have a (semi-inherited) macro that prints different pages of a workbook, based on whether and what their entries are. One of the pages contains a text box, where users will enter different lengths of text. When the macro runs, it prints right the first time but also "resizes" the text box so that future print attempts only print part of it.
I put "resize" in quotes because the text box does not appear to change shape. However, when I look at its properties it suddenly says it is much smaller than it was before (and still appears to be).
Hello ladies and gentlemen,
I have a procedure that opens a txt file and I was wondering if the open dialog box could have a title indicative of action taking place. It would say in the title for example: "Please choose the database txt extract to load".
Here is the
Is there a way to have the print dialog box come up, make a selection, and put that selection into a variable?
Ex:
Code:
Application.Dialogs(xlDialogPrint).Show
brings up the print dialog. I need to be able to select the printer and have the selected printer put into a variable in my vba code.
I have tried Ex: w=Application.Dialogs(xlDialogPrint).Show, but all I get is w=true
The reason I need it is because I will be printing via vba code, but the printer may vary for different print jobs.