Add Several Cell Values In Vba

Apr 2, 2008

I have the following code in a VBA module: AgeRangeTotal = Range("D27") + Range("D28") + Range("D29") + Range("D30") + Range("D31") + Range("D32") + Range("D33")

I feel like an idiot asking this but - is there a way to sum the range of above cells in VBA rather than writing a reference to each individual cell I wish to add?

View 2 Replies


ADVERTISEMENT

Comma Separated Cell Values To Column Of Unique Cell Values

Mar 31, 2014

I have one column of data. there are currently ~10k rows, but this will increase over time. each row has either a single value (example: pepsi) or a comma separated value (google,samsung) with up to 6 commas. instead of the rows looking like this:

pepsi
google,samsung
coca-cola

I want them to look like this in one column (preferably via a formula):

pepsi
google
samsung
coca-cola

I would like the above output to be a unique, alphabetized list.

View 8 Replies View Related

Match Cell Value Then Copy And Paste Values Cell Values Into The Same Row?

Jun 27, 2014

write a script to match a cell value then copy and paste the matching row across two worksheets - "Master List" and "Demographics".

These two worksheets have the same cell values in Column A, the key difference is the Column A cell order in the second worksheet "Demographics". This Column A cell order is set arbitrarily by another system and will vary over time.

I would like to match the rows, then paste the three columns from the second worksheet into the first worksheet.

For example:

"Demographics" Worksheet Cell A2 = "Master List" Worksheet A45 - then copy cells A2, B2 and C2 and paste into A45, B45, C45 respectively.

"Demographics" Worksheet Cell A49 = "Master List" Worksheet A12 - then copy cells A49, B49 and C49 and paste into A12, B12, C12 respectively.

I have created a sample spreadsheet here; - List Schema.xlsx

View 2 Replies View Related

VBA To Fill Cell Values Based On Adjacent Cell Values

Jun 5, 2014

I request you to write a code for me to fill the cell values as "Not Applicable" in Column "AZ", if the "B" Column cell values = "Justified", "Approved LSAR" & "Approved SDAR".

I have attached the work book of what I am trying to accomplish.

View 14 Replies View Related

Adding Cell Values That Are Dependent On Adjacent Cell Values

Oct 27, 2009

Here's an example of what i'm working with,...

Range is C40:D48

View 4 Replies View Related

Combining Cell Values In Column Based On Other Cell Values?

Mar 2, 2012

it should compare and see if product, model for same id is the same but brand is different and the quantity of one or more of those brands=0 then the result (In column F)should combine the brands. check the attached image for more details.

View 5 Replies View Related

Cell Values Reset When Other Cell Values Change

Jun 6, 2014

Cells B3 and B6 both have lists created through data validation.

If the value in B3 changes (by user selecting from the list), I'd like B6 to automatically change to "Select a take to retrieve" (which is the first choice in the B6 list.)

Likewise, if the value in B6 changes (by user selecting from the list), I'd like B3 to automatically change to "Select a version to take" (which is the first choice in the B3 list.)

View 1 Replies View Related

Generating Values In Number Of Cells Based On Adjacent Cell Values

May 22, 2014

What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username

The following is my code

[Code] ....

Above code runs without errors but does nothing.

View 4 Replies View Related

Find Same Values In Different And Unequal Cell Ranges And Refer To Values

Jul 2, 2009

I have data similar as shown in the following:

A1A11
B2AA1122
C3B22
D4C33
D44

The idea is to add compare the cells of the first column with the third column. Where same letters/words exist, the corresponding value of the first column should be added to the second column (where no letter exists equally, the space remains empty), so it will look like this

A111
AA1122
B222
C333
D444

the third column always will have at least the same letters as the first column, but new letters/entries can occur.

View 3 Replies View Related

Compare Cell Value With Range Of Values And Match Row Values With Header

Jun 5, 2012

I have .csv file from which the data is importing to master schedule. i have a column in .csv file which is spitted into multiple columns. and my need is i have to compare this each individual cell value with the range of header values in master schedule and if match found i have to place that cell in the row.

I am adding 2 attachments one is .csv and other is master schedule.

I couldn't able to find where i have to attach my files.

View 2 Replies View Related

VBA - Copy Range With Multiple Same Values Based On Other Cell Values

Aug 31, 2012

I want to build a database where the user can select a specific time period. I have a static file with the time periods and the related values. For instance I have in column A1:A15 the time periods from January 2011 to Dezember 2011, but I have some dates multiple times as there are more values attached to it. For instance I have in the first 4 rows January 2011...what I want is when someone puts in the value January 2011 in cell B1 and Dezember 2011 in cell B2 that the whole static file gets copied to another location (including the multiple dates) displaying the chosen time period. Similarly if someone puts in the value March 2011 to November 2011, I want only those values to be copied.

View 4 Replies View Related

Vlookup Multiple Values Then Concatenate All Values In One Cell?

Jul 23, 2014

two formulas for one data set. The data is attached in the spreadsheet: "Product IDs". The data is a set of Master Product IDs (parent) and the Linked to them Products (children). I need to create a relationship between unique parents (Master Product IDs) and their children (Linked Products)

I need to create two formulas:

1. From the Data Set table, need to vlookup the unique value in column A (Master Product ID) and return comma delimited (concatenated) corresponding values from column B (Linked Products). So, the result will be as shown in Table 2.

2. From the Data Set table, need to vlookup the unique (de-duplicated) parent/children relationship in column A (Master Product ID) and return comma delimited (concatenated) corresponding values from column B (Linked Products). There are total 3 parent/children relationships in Table 1. So, the result will be as shown in Table 3.

View 8 Replies View Related

Match 2 Cell Values And Extract Required Values

Jul 19, 2012

Column C5:C9999 & D5:D9999 contains alphanumerical values.

In E5:E9999 i want the result=Column C provided it matches Column D else null.

Ex:
C5=Peter ShowROOM D5=RooM E5=Peter ShowROOM
C6=Peter ShowROOM D6=r sh E6=Peter ShowROOM
C7=PeterShowROOM D7=r sh E7="" (null)
C8=PeterShowROOM D8=P E8=Peter ShowROOM

View 5 Replies View Related

Lookup Multiple Values In A Single Cell (separated By Commas) And Then Return The Values To A Single Cell (also Comma Separated)

Jan 7, 2009

If I have, in one cell (call it D1):

EH,DR,HU

and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E

I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...

eg...

F,G,H

View 9 Replies View Related

Assign Values To A Cell Based On Values Of Another

Jul 7, 2013

I'm attempting to assign 1 of 4 predetermined values to a cell based on the values of entries in another cell.

View the example attached : Value assignmts.xls

Assign the Value of 1, to (D8) when any value entered in (C9) is equal to or over 380, but less than 410.
Assign the Value of 2, to (D8) when any value entered in (C9) is equal to or over 410, but less than 440.
Assign the Value of 3, to (D8) when any value entered in (C9) is equal to or over 440, but less than 470.
Assign the Value of 0, to (D8) when any value entered in (C9) less than 380.

View 9 Replies View Related

Sum Time Values Based On Other Cell Values

Dec 19, 2013

I have a table of times which shows how long it took someone to process a form. If this value is longer than 10 minutes the cell next to the duration time contains the value 'Break Over Ten'. This is only true when the time is outside of 12:00 to 14:00. If the break is within this time period it shows 'Lunch'.

Is it possible to sum all of the time values that are over flagged as 'Break Over Ten'? This is how it looks

Event Date Start Time End Time Duration Breaks Duration Of Break
19/12/201308:43 08:43 00:00:35 00:00
19/12/201308:43 08:44 00:01:03 00:01
19/12/201309:05 09:19 00:13:15 BREAK OVER TEN00:13
19/12/201309:05 09:19 00:13:15 BREAK OVER TEN00:13

I was thinking of using SUMIF but can't work out how to total the values in the duration of break column when the cell to the left reads break over ten. Is it possible to do this?

View 1 Replies View Related

Replacing Cell Values With Values From Another Cell?

Apr 21, 2014

I have done this before, but it has been a while since Ihave had to use VBA code. What I want to do is find and replace every occurrenceof a test string within a formula with a text string in the first column ofthat row. In the example (I have omitted the formula and left just the word toreplace). I used to have a simple VBAMacro, but not sure what I did with it!

Bob David David David --Every Davidreplace with BOB
Tom David David David --Every Davidreplace with TOM
Fred David David David --Every Davidreplace with FRED
Matt David David David --Every Davidreplace with Matt

View 5 Replies View Related

Replacing XML Values With Cell Values?

May 2, 2012

So I have sheet with various values.

I have a rather big XML type column where I want to replace values (in green) with thier corresponding cell values. Im pretty sure this can be done but have tried with no success!

item>TEST POST http://domain.com/Good StuffCan Be ListedLike ThisOkay StuffCan Be ListedLike This
Bad StuffCan Be ListedLike This]]> 102011-07-07 19:41:16 2011-07-07 19:41:16openopengrand-canyonpublish 00post0
_edit_lastkeya:6:{s:4:"zoom";s:2:"14";s:8:"latitude";s:8:"36.34313";s:9:"longitude";s:10:"-112.51339";s:11:"address_one";s:12:"Grand Canyon";s:11:"address_two";s:12:"Williams, AZ";s:6:"bg_img";s:0:"";}]]>_thumbnail_id

View 3 Replies View Related

Recalculate Cell Values To New Values

Sep 1, 2007

I am trying to write code that runs a calculation on each cell in a range and replaces the current value with the calculated one. The calculation is very straightforward (see green range in example file)- instead of the absolute value in a cell (yellow range) it displays the ratio of said cell value to a value from another column (blue range). Basically, after running the macro, the green cells (just formatted for ease of reference) would replace the yellow ones.

View 5 Replies View Related

Paste Values From Another Worksheet (paste Special, Values) In A Cell Which Is Lookup Value I Get #N/A

Jun 28, 2009

I have a little bit of problem with lookup function. When i paste values from another worksheet (paste special, values) in a cell which is lookup value i get #N/A. These values are numbers. When i put '7 for example i get the values i want from lookup table. I have a lot of these cells and its tedious job to put ' in front of every value. Is there a quicker solution?

View 3 Replies View Related

Can Cell Keep Cumulative Of Values Typed In Adjacent Cell On Daily Basis?

May 31, 2014

See the attached excel table. I need the cell E4 to keep adding the values typed in the cell D4 on daily basis.The cumulative shouldn't be changed if there is no value in the cell D4. E4 should accumulate and keep the totals typed in D4...

Cumulative Input.xlsx‎

View 5 Replies View Related

Conditionally Format Cell Using Absolute Values And Relative Cell References?

Mar 25, 2013

Below is my code which isn't formatting the cells it's suppossed to. It looks like it isn't doing anything. I think the issue might be with the highlighted section of my code, but when I go to "Manage" my rules for conditional formatting, excel references the appropriate cell under the "Applies to" section. I am using relative cell references for for the majority of the rest of the code and this section follows a section that selects the correct cell for this conditional format.

Code:
Selection.FormatConditions.Add Type:=xlExpression, Formula1:="=""ABS()>.005"""
Selection.FormatConditions(Selection.FormatConditions.Count).SetFirstPriority[code].....

View 1 Replies View Related

Paste Special Values Of A Formula To A Cell But NOT From A Defined Source Cell

Jul 6, 2008

my destination cells will have formulas like:


='E:My WorkTestData[CCC.xlsx]Input'!$S$31

Everything works fine. But I don't want the destination cells to display the full formula, but the actual Value only

I thought of a way to build a script that first builds the formula to one cell then Copy Paste Special value of that Cell to my desired Cell.

But when the code runs The cursor moves back and forth all the time...

View 9 Replies View Related

Excel 2010 :: Display Cell Ranges From Multiple Locations Based On 2 Cell Values?

Jun 4, 2013

I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...

I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.

P.S. I have excel 2010 and windows 7

View 1 Replies View Related

Change Colour And Values Of Cell Based On The Value In Adjacent Cell?

Nov 10, 2012

I need to write a condition in such a way that cell IF A1= "DBR","BPR","SLR","SKR" then change cell B1 to SPECIFIC COLOUR Each condition different colour. A1 values ("DBR","BPR","SLR","SKR") is a list of selectable values. if the condition is falls then B1 should be normal (white color cell) with 0 in it.

View 1 Replies View Related

Colour Cell Based On Few Conditions / Cell Values Of Other Cells In Same Row?

Jun 28, 2014

In the xls for each step I have 2 raws-planned and actual. Step planned duration is populated manually over the weeks.Before that row we have another reflecting the actual step status per week

I would like to find a way how cell reflecting the actual status of a step can be automatically populated (coulored) based on the colour/value of activities that are planned for that week and for that step.Activities are listed below the step and again have planned and actual row.

The rule should be : if for a week we have several activities all of them should be finished in order to have step stataus auto populated as green. If a single activity planned for that week is not done-then weekly step status should be red.

The activities for each step are grouped below the step. It seems that one of the difficult part in that request would be how formula will understand where starts and finishes the activities that belong to one step. To get that happen I placed a column showing step and another column where we activity.

View 9 Replies View Related

Inserting Values In Cell Depending On Content In Adjacent Cell

Mar 20, 2014

I have the names of companies in one column, and the amount they owe in cells in the column beside them. I then have a second list of companies that is a subset of the first. Is there a formula that would place the amount they owe in teh corresponding cell adjacent to the compny in the second list? I've attached a sample workbook, Full Company List in column A, amount owing in B, trimmed down list in D and ideally I'd like the corresponding values in E.

View 3 Replies View Related

Checking Cell Values And Position On A Row And Setting Summary Value In Another Cell

Apr 8, 2014

I have a tracking sheet that is used to show where a specific project is within the lifecycle and would like to automatically set a summary value depending on the last data entry within a range of cells in a row and also set it to RAG status depending on the value.....

View 2 Replies View Related

Copy Cell Values In One Cell Based On Value Of Adjacent Cells

Feb 20, 2014

What I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)

is it possible ( with a command button) Sample attached

View 4 Replies View Related

Search Cell If Blank Delete Cell Shift Values Up

Oct 22, 2009

The below code is what I have and it works but what I need is for it to loop until it doesn't delete anything. How can this be done?

View 2 Replies View Related

Format Multiple Cell Values Displayed In Single Cell?

May 24, 2012

I have the following data on a spreadsheet created by a formula:

A1: 1.1234
A2. 2.234
A3: 3.34

I have the data formatted to only have two decimal places so it looks like this:

A1: 1.12
A2: 2.23
A3: 3.34

I'm using the following formula in cell B1 to display the values of those cells in a single cell in order A1,A2,A3:

=A1 & "," & A2 & "," & A3

However when the values of A1, A2 and A3 appear in the in cell B1 they appear as: 1.1234,2.234,3.34

Is there a way I can edit the formula or format something so the values in B1 appear as with only two decimal places? i.e 1.12,2.23,3.34

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved