I'd like to ask if there is anyway to use an advanced criteria with a NOT EQUAL operator.
I have a list that contains about 50 different data values that I want to filter but I want to restrict the list to not contain four different data items. Clearly, autofilter did not work as I can only specify two conditions in the custom filter. I want to use advanced filter instead but this only tests for equality.
I found a great bit of Advanced Filter code that works great, and fixed a problem of clearing a cell breaking the filter.
But if I want to increase the criteria from 1 row to 2, so you can start to include And , Or operations, it breaks the filter. Even an attempt at a manual one fails, until you put the criteria range back down to one row, then it's fine again.
I've tried changing the Target Row to >2 but that didn't work. how to make the criteria range bigger, and no problems of breakage if you clear the cells? It makes for a very useful automated Advanced Filter.
Here's the code :
[Code] .....
Database = the named area of raw data.
DATA is the name of the raw data worksheet
The criteria range should be AZ1:BC3, but of course royally breaks it...
Can I use vba advancedfilter to work with more than one criteria?
I presently have one range designated. At the top cell has the field, or column, header name being "Student", then followed by a list of 6 people, located in Sheets("Extract").Range("A1:A7"), which is then extracted from Sheets("Complete").Range("tblPrimary[#ALL]") to Sheets("Extract").Range("AA1") as in:
[Code] ......
I want to also be able to filter out a specific month, whose field/column name just happens to be "Month", but I suspect I will need to change it to "InfoMonth" or the like to avoid the probable key word of "Month"...
The months are numerical in those fields - 1 through 12.
Can I add to the present filtering line or do I need to then create an additional filter?
I'm trying to use an advanced filter to filter a large data set using several parameters. I had this worked out before but there have been some parameters added that have thrown my filter off balance and I'm struggling getting it back.
Here's the criteria I need to filter
Column 1:
85
Column 2:
3
Column 3:
BU 1
BU 2
BU 3
BU 4
Column 4:
BA 1
BA 2
BA 3
BA 4
BA 5
BA 6
BA 7
Since I have an uneven list of criteria, I'm struggling to figure out the layout with the 'AND' condition. I know I can copy the 85 and 3 figures to each line but when I have 4 figures in column 3 and 7 figures in column 4, how can I create the 'AND' condition for all these criteria?
I have a list of farmers in A1:A1000 with the types of livestock they keep in col B, delimited with commas and spaces e.g:
Col A Col B
Name Animals
Smith Cows, Pigs, Sheep, Horses
Jones Sheep, Pigs, Chickens, Geese, Alpaccas
Price Cows, Sheep, Pigs, Chickens, Rabbits
Williams Cows, Chickens, Horses, Alpaccas, Pigs
I need to be able to filter this list using up to 3 criteria, e.g. Filter all farmers with Cows, AND Sheep, AND Pigs. Applying this to the data above would show Smith and Price.
The user would need to enter the criteria somewhere, preferably in 3 cells, let's say D1, D2, & D3. I reckon I need to use Advanced Filter, but not sure how to do it with all the animal types to be filtered being in one column.
as u can see on picture I have some data and i want it to filter with "debet" and "credit",while debet can be zero or number x when in the same time credit can be zero or the same number x so when entering number x meaning e.g. 500 i get to rows
first
debet = 0 and credit = 500
second
debet = 500 and credit = 0
while running advanced filter i was getting nothing because i couldn't write what i needed
When doing advanced filter in VBA, is there a way to set the criteriarange, without having actual cells on a worksheet with the criteria in?
I've tried criteriarange:=Array("Currency", ws.Name), but it didn't like it.
I think to run one report. First sheet put options and copy to data page as criteria, and run advanced filter, it only shows heading.
VB:
Sheets("Report").Select
Range("23:350").Delete
Sheets("Details").Select
Range("w8:ae9").Copy
Range("w12").Select
[Code] ......
I have a worksheet with 6000 rows (W1), and another with 2500 rows (W2).
I need to check whether the values of W2 are found in the second column of W1. As in if(iserror(search(valuex,worksheet2!B2)),"",A2) ---> resulting in something like:
If the value is found in the cell B2 of column B on W1, then return its reference which you find in A2, otherwise leave a blank.
I need to check all 2500 values in all 6000 rows.
I know for sure that I will have limited hits (max of 200) so I would like to create a list on W2 (the values) where I check if they are found in W1 and return only the 'hits'. I would like to filter out the blanks.
YOu can filter the blanks, I know, but you need to have a 'full' version (I thought) with all the blanks and the hits and then and only then you can filter.
But is there a way how I can use the advanced filter, with a criteria range using a function. Something like: criteria range --> if(iserror(search(valuex,worksheet2!B2)),"",A2) is not equal to "".
I cannot work out the syntax to run an advanced filter for all Non-Blank Columns! I have attached an example sheet, and you can see my syntax in cell D4. I am looking to bring through a list of all line that are both Status= "NOT QUOTED YET" and Project Name= NOT Blank. Unfortunatley, the Status Row will be set as NOT QUOTED YET when there is no project name enetered, hence the problem.
View 2 Replies View RelatedI m Playing around with AdvancedFilters. Using the code below I can filter for data in the CriteriaRange, but I want to filter for data not in the CriteriaRange. I can't seem to find out to do this. I'm wanting to execute this sub from a button on a userform.
Sub Filter1()
Range("Data").AdvancedFilter Action:=xlFilterInPlace, CriteriaRange:=Range("CRng"), Unique:=False
End Sub
attached is a spreadsheet effectively replicating a criteria box I’m using to do an advanced filter on a large amount of data (5000+ lines). The criteria can be anywhere from 1 to 7 different lines. What I’m trying to achieve is code that will look at the specified criteria box, determine how many rows of criteria actually exist, and then use that code to perform the advanced filter function on the data.
Below is the code I’ve put together so far. The problem is that this code can only determine that there are 7 total rows of criteria to use, and not the exact number of rows of criteria. For instance, say I only wanted to use 2 rows of criteria, I’m hoping the macro would only use those 2 rows instead of picking up all 7 rows.
See criteria box on spreadsheet for example. In this particular example, I’m wanting the macro to only use B49:I51 as criteria. The ideal solution would be for the macro to look at the criteria box and determine the last row used that is not filled with “1”s. Does anybody have any thoughts on ways to tweak my code to get it to achieve this?
Sub RunDynamicSelection_Click()
Dim wsSheetDS As Worksheet
Dim wsSheetRS
Set wsSheetDS = Worksheets("DataSheet")
Set wsSheetRS = Worksheets("ReportSelection")
With wsSheetDS
.AutoFilterMode = False
With wsSheetDS. Range(("A4:N4"), wsSheetDS.UsedRange.Rows(Worksheets("DataSheet") _
.UsedRange.Rows.Count)).AdvancedFilter Action:=xlFilterInPlace, CriteriaRange:= _....................
At work, I have a workbook with multiple tabs that contain lists. Each tab has a corresponding Pivot Table.
There is a business requirement that a user can specify a name, which filters the data. For the sake of simplicity use this for an example
Column Headers: First_Name ; Last_Name; Age
Row 1: Johnny; Bravo; 29
Row 2: Shane; Falco; 34
Row 3; Bobby; Shane; 15
The user specifies "Shane" as the filter in another pre-determined Cell (D1). Using advanced criteria, I need to find all rows that have Shane in either First_Name or Last_Name. The only way I know how to do that is inserting two rows and adding criteria:
First_Name ; Last_Name; Age
=D1; ;
;=D1;
Johnny; Bravo; 29
Shane; Falco; 34
Bobby; Shane; 15
With Criteria Range = "A1:B3"
This is problematic because my Pivot tables now include 5 rows of data.
I am trying to use an advanced filter to extract records that meet the criteria in the blue input cells. I can't get the criteria correct to allow me to meet the 3 conditions. There are duplicate names in the list so I will need to use unique records only option....
View 9 Replies View RelatedI have a advanced filter that works pretty much close to how I want it to. However I would like it to either cancel the new filter or copy everything if it finds 0 matches.
If the copied location is blank it breaks my sheet. So I need to find a way for it to never be blank, either by canceling it, copying everything, or finding some other way I haven't thought of.
Also for some reason my Advanced Filter does NOT Ignore blank "OR" cells. If I place a word in the top cell, then leave the bottom blank, it searches for the top cell or anything and I end up with everything. Its quite frustrating.
Im using an advanced filter that uses the following criteria
Days Late Note(s) Note(s)
>90 <>*agreement* <>*QTR*
This shows all data over 90 that do not incl the words agreement or QTR in a column marked Note(s).
My problem is that I do not want to show records that are Null in the Note(s) column.
Note(s)
<> Does not work (possibly because it is text and not Numbers)
as this does work if used on records that contain numbers.
I'm working with many rows of data (500,000+) and many columns. To simplify my question, I'm going to provide a simple example using made up numbers and only the columns I'm concerned with.
BillT Doc.ItemQty
F11231012.00
F2123205.00
S1123105.00
RE321202.00
F2321108.00
F2321201.00
RE321203.00
RE999808.00
F27771001.00
RE7771001.00
I am trying to remove the docs that have two Bill types that cancel each other out, where the qtys match and highlight the rows where the qtys don't match. The macro needs to have the positive and negative bill types programatically entered, where for example F1 and F2 are positive and S1 and RE are negative. Keep in mind the data may not necessarily be in order as it is above.
So for example with data above, the rows for doc 777 would be removed completely because the item numbers are the same, the qty is the same, and the bill types oppose each other. Doc 123 and Item 10 lines should be highlighted since their bill types are opposed bu their qtys don't match.
I hope this makes sense. I tired to achieve this using multiple loops and arrays, but ran out of memory when working with the entire set of data. I'm assuming their must be a better way to do this, I'm hoping some of the intelligent individuals here will be able to point in the right direction.
Can anyone explain why the unique filter does not produce a unique result - sample attached?
View 2 Replies View RelatedHow do I go about using an advanced filter to filter a list of data e.g.
boat
boat
boat
car
car
truck
and have the filter extract only the boat entries to another worksheet, so on another worksheet I end up with
boat
boat
boat
1- Force cell format date to by (yyyy/mm/dd) only, with worng msgbox( validation).
2- Make the first day of a month in a color cell
I've Tried this In Conditional Formating (=VALUE(right(A1;2))=1) but didn't work
3-Make Advanced Filter to filter data between two dates .
I have a large Excel with details of 1,000 staff
Column J1 is called: Resource Name which has 1,000+ staff other columns have corresponding Hours, Project names etc
I want an advanced filter where I select COLUMN J:J and filter this whole sheet based on say 25 names (in the format they're in) e.g
Frank, James
Wilkonson, Paul,
etc
In the Advanced Filter, Ive selected J:J as LIST RANGE, but how do I input an OR statement in the Criteria, as above i.e where name is Frank, James OR Wilksonson, Paul OR
Alternatively, I have the list of the 25 names in Sheet 2, can the Advanced Filter do a VLOOKUP then filter entire Sheet based on the names provided?
I have a condition in advanced filtering as >90%. However, I would like the "90%" to be calculated via a formula in another cell and this condition to reference it. Is it possible?
View 8 Replies View RelatedI have a file that has a column of dates. I would like to use advanced
filter to filter anything with a date that is <today()-1 but I can't seem to
make the fomula work. I can make it filter on =today()-1 but when I use the
< it doesn't calculate today's date and gives me nothing.
Basically I have set up a list on sheet1, this is now on a drop down in sheet2 and my raw data in sheet3.
I want the table in sheet2 to just display the product items I select in the dropdown but it is displaying all the raw data (although is updating when I update the raw data)
Granted I copied the code whilst researching but I'm just not quite there.
Could someone possibly look at the attached and let me know where I am going wrong. Also as you can tell I am very new to teh VB application in Excel, could anyone reccommend a good place to start learning the very basics?
why the Advanced Filter works in the macro but not in the UDF?
Code:
Public Function strUniqueVal(rng As Range) 'rng variable must include sheet name
Dim c As Range
rng.AdvancedFilter Action:=xlFilterInPlace, Unique:=True
[Code]....
Having big problems getting an advanced filter macro to work on-going (meaning again and again and again once I update the table it filters from).
Macro is as follows:
Range("A1:O1").Select
Range("A3:O65536").AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=Range( _
"H1:H2"), CopyToRange:=Range("T1:AH65536"), Unique:=False
Range("A3:O65536").AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=Range( _
"G1:G2"), CopyToRange:=Range("AM1:BA65536"), Unique:=False
Do I need to specify the sheet that this filter should occur on? If so could someone indicate how I would get that into the macro?
I have a worksheet that conatins multiple columns that are populated from a sql query.One column is a parts list.This has 1705 rows.
I have another worksheet that contains a list of parts in one column.This list is varying in row length.
I want to be able to produce a list that only contains matching data , including () around parts and if not too difficult an indication of data that is not in first list but is in second list.
When I do an advanced filter using the second list as the criteria i am not recieving all of the data from the filter , ie in the first list there is parts in (1234XYZ ) but in the second list the part is 1234XYZ , this part is not being resulted in the advanced filter unless I put brackets around the part in the second list . There is no way of knowing which part is in brackets in the first list.
I have a huge list (over 900,000 rows) of text codes (e.g. ABC-12345) on Column A Spreadsheet 1 and would like to remove the ones that are not included in Column A Spreadsheet 2.
I changed all of the text on Column A Spreadsheet 2 to have the in front of it (e.g. ABC-1234) and tried to run the advanced filter but it does nothing.
This code works, but I would like to cut (remove) the records from the original record list.
Range("A:F").AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=Range _
("H1:H3"), CopyToRange:=Range("J1:O1"), Unique:=True
I need to lookup and concatenate all the header values where the value in the corresponding row equals a certain value. For example, column D, has the column header value if the cell values equals "X". Likewise column E has the column header value if the cell values equals "Y". I have too many columns (this is just a simplified version) to use nested if statements.
resource1resource2resource3 XResources YResources
Jeff X resource2
John X X resource2 resource3
Jim Y resource1
I'm not an excel newbie, but I keep thinking there must be a simple solution that I am missing.