I have been using the workbook with the calendar form for ages, but now when i click on the date field to invoke the calender it come out with the comple error:Variable not defined. Here is the piece of code
Private Sub UserForm_Initialize()
If IsDate(ActiveCell.Value) Then
Calendar1.Value = DateValue(ActiveCell.Value)
Else
Calendar1.Value = Date
End If
End Sub
I'm getting a Variable Not Defined error
in my workbook_open I have the following code
Code:
Dim workround As Integer
workround = 0
in one of my sheets worksheet_change I have
Code:
If workround = 0 then
when I get to this I get the Variable not defined error. I am using this to bypass some code that does not always need to be run (it slows the workbook down). So I also have another piece of code that toggles workround from 0 to 1.
I have a feeling this error has something to do with Option Explicit. But My limited understanding is obviously insufficient to know what is happening or how to fix it. As I believe that I have defined the variable within the workbook_open code.
New to VBA and just trying to make some edits to some existing code. I have basically copied a pre-existing form and module and changed names from "Appendix" to "Drawing" as I am trying to replicate what the piece of code already produces for a table of appendices, for my drawings.
However, when I try and run the form I get Compile error: Variable not defined with lstDrawings highlighted.
[Code] ...........
Is this something that should be defined in my global module which I am missing?
The following code has been used previously to enter data from a userform to a worksheet without a problem. However, since I added some new bits of code I am getting a compile error with the message variable not defined.
Here is part of what I have so far and the bit that is highlighted after the error comes up is the 'Set ws' line;
Code:
Private Sub CommandButton1_Click()
Worksheets("Duties").Range("C5") = txtdate
Worksheets("Duties").Range("H5") = txtarea
Worksheets("Duties").Range("N5") = txttea
Set ws = Worksheets("Duties")
'find first empty row in database
iRow = ws.Cells(Rows.Count, 1) _
.End(xlUp).Offset(1, 0).Row
The code I have recently added:
Code:
Private Sub UserForm_Initialize()
Set wsRes = Worksheets("Resources")
With wsRes
.Range("B1", .Range("B" & Rows.Count).End(xlUp)).AdvancedFilter xlFilterCopy, , .Range("L1"), True
With .Range("L2", .Range("L" & Rows.Count).End(xlUp))
cboTeam.List = .Value
.EntireColumn.Clear
[Code] .......
I am creating a UserForm to get macro running options from the user. The Workbook__Open calls the macro which shows the UserForm right after the variables are defined. Is there a way to avoid the compile error?
07.15.2013-14.15.54 - Bermex's library
I've used Excel for many years, but finally am learning VBA, using Excel Progamming for Dummies by John Walkenbach. Excel is version 2000.
I've searched extensively on Google and on the MrExcel site for the solution to my problem, but still haven't found it . Any direction would be most appreciated.
I'm trying to execute the examples in the book, and have gotten the error message "Compile error: Variable not defined" with "MyString =" highlighted with several of the examples. Could someone please tell me where I'm going astray?
Following is the latest subroutine I typed into the module, from page 124:
Option Explicit
Sub GetLength()
MyString = "Hello World"
StringLength = Len(MyString)
MsgBox StringLength
End Sub
I keep getting 'compile error - variable not defined' in the following
Sub LockIt()
TextBox1 = ""
End Sub
It works as a regular Module but when I put it into a "Private Sub" for a button its not working.
Basically I have a master sheet that I create Tests from. I push a button and it creates a Test for others to take. I want the macro to transfer from the Master to these so when they are done I can press a button and upload the answers to a tracking sheet.
It errors on the strSecondFile
Private Sub CommandButton1_Click()
Dim wbk As Workbook
Dim NAME As String
'strFirstFile = ActiveWorkbook
strSecondFile = Application.GetOpenFilename
Set wbk = ActiveWorkbook 'Workbooks.Open(strFirstFile)
NAME = Range("A6").Value
I came across a weird situation using a standard print macro. One of my users could not use the print macro due to a compile error. The row that was highlighted was
.PrintErrors = xlPrintErrorsDisplayed
the error states that the variable is not defined. I removed that line of code and everything prints fine.
I tested this code out on excel 97 and it worked; is this sensitive to OS version? Will leaving this line of code effect anything big?
I keep getting a "complie error: variable not defined" and I am not sure why (the error highlights the first instance of "sh"). Any feedback? I am trying to test a value of a cell for each row and if the row meets the test then it increases the value in another cell by 1.
This is what I have so far...
I am attempting to use the Find and Replace code you assisted with me into another project, But I am missing something. I keep getting a Variable not define error when I go to search for a CMM # in the add a referral form.
Highlight in yellow is the code ...
I am trying to put two subs into a macro. They work individually, but when I put them together, I get a "Compile Error: Variable Not Defined" Message. I was told I have to define the variable in the sub multipleif(), but I am not certain as to how to do this. The error message highlights the line I have bolded below.
VB:
Option Explicit
Private Sub CommandButton1_Click()
Dim mth As Variant, txt As Variant, des As Variant, wdt As Variant, I, Cell
[Code]....
I have a relatively complex report that I work with and a worksheet is no longer required. I have deleted the worksheet and reference to it hwoever when running the macro to pull all the data, it gets to the summary of all the data and i get the Run Time Error 1004 Application-defined or object-defined error pop up. ON reviewing it, it is on this line ActiveCell.Offset(0, 0).Range("a1:a" & Range_Height).Select of the below code...
VB:
Sub GetRangeName()
Sheets("TOTAL").Select
[Code].....
use code tags around code. Posting code without them makes your code hard to read and difficult to be copied for testing. Highlight your code and click the # at the top of your post window.
I have a simple function below to put in different forumlas in different cells to get stock quotes. When I run this I get runtime error 1004 application-defined or object-defined error. The first formula goes through but vba chokes on the next formula: ActiveCell.Offset(I - 1, 4).Formula = username
Run-time error '1004' Application-defined or object-defined error. I am trying to use this
View 2 Replies View RelatedI was trying to use the below code
View 4 Replies View RelatedI keep getting a Run Time Error 1004 (Application Defined or Object Defined Error) when my sub reaches this line:
ActiveCell.Formula = "=SUM(D222,D224,D226,D227,D229,...)"
In the actual line of code the "..." above is another 20-30 or so cells in column "D". Probably no more than 150-170 characters in the line.
If I remove half of the cell range names it works, but I need all of the cell ranges for the equation.
I am trying to copy the info from one workbook to another workbook.
I keep getting the above referenced error...
Private Sub CommandButton1_Click()
Dim filepath As String
filepath = Range("A100")
MsgBox ("File Appended")
Workbooks.Open (filepath)
Windows("CorrespondenceMaster.xls").Activate
Sheets("Sheet2").Select
Range("DesNo", "LocationPath").Select
Selection.Copy
Windows(filepath).Activate
Range("A2").Select
ActiveSheet.Paste
End Sub
I haven't figured out who hates who more, me hating VBA or VBA hating me.. we just do not get along very well.
Anyways, I am having difficult understanding why I am getting the following error:
Error 1004: application defined or object-defined error.
I am using code that I just copied over from a worksheet where it was working fine. This is part of it.
I have a userform setup to enter data into a worksheet
Whee the user hits the button to add the data, I get the error 1004
Application defined or Object defined error
It is on the line Set LastRow
Private Sub CommandButton1_Click()
Dim LastRow As Object
Set LastRow = Sheet1.Range("a65536").End(x1Up)
....end sub
Now I am sure this has always worked in the past, so Is it me or am I really missing a plank or two?
I am having difficulty getting a form to work the way that I would like it to work. I have a form that is used to display questions that my students will be answering. The form also is used to put the answers into a worksheet. I have 2 sheets. Sheet2 has the questions, student answers, and correct answers. Sheet1 is used to indicate correct answers and to keep track of percentage correct. I am fairly new to VB. I have 2 pieces of code that I am going to post. The first one works and the second one doesn't.
This is in the "This Workbook" section and it works.
Option Explicit
Public intNoQ As Integer
Public strNoQ As String
Public NumberofQuestions As Integer
Dim StudentName As String
Dim InputBoxAnswer As String
Public Sub Workbook_Open()
Application.Visible = False 'Hide Excel
Load Questions
Load NumberCorrect
NumberofQuestions = Worksheets("Sheet1").Range("K3").Value
For intNoQ = 1 To NumberofQuestions
strNoQ = VBA.CStr(intNoQ)
If intNoQ = 1 Then
Questions.Controls("QuestionNumberBox").Value = "Question#" & strNoQ
Questions.Controls("QuestionBox").Value = Worksheets("Sheet2").Range("B1").Value
End If
Questions.Controls("CorrectBox" & strNoQ).Visible = True
Questions.Controls("CorrectLabel" & strNoQ).Visible = True
Next intNoQ...............
when I run the macro, I receive an error: "Run-Time Error '1004': Application-Defined or Object-Defined Error" See attached macro. If I click "Debug", the line "With r.Resize(,1)....... becomes highlighted in yellow.
View 9 Replies View RelatedIn one worksheet i have created the following code, which adds date to
specific column when data is entered in colum A.
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
If Target.Column = 1 Then
Target.Offset(0, 10).Value = Now()
End If
End Sub
The problem is that when trying to delete a whole row, error message pops-up.
Run-time error '1004' Application-defined or object -defined error. When click "End" actually everthing is ok, the row has been deleted, but was just wondering what is causing that error.
This error is telling me "application defined or object defined error" and i am unsure how to fix it. Basically i have a ton of files within a folder that i am trying to do some reformatting to. I would like to save the new files to a new folder and keep the originals where they are.
View 5 Replies View RelatedI keep running into this error when I try to create a pivot table.
The debugger highlights the following line:
Trying to convert an Excel 2003 macro to work in Excel 2007.
The problem line is
Dim MyDataObject As DataObject
I suspect the problem is a Missing Reference, but I cannot figure out which one. I have the same ones (in 2007) as 2003 except for one which is not showing
Microsoft Forms 2.0 Object Library
Is this the one it needs? It is called something else in 2007?
The ones I do have ticked are
Visual Basic For Applications
Microsoft Excel 12.0 Object Library
OLE Automation
Microsoft Office 12.0 Object Library
Microsoft ADO Ext. 2.8 for DDL and Security
Microsoft DAO 3.6 Object Library
Microsoft ActiveX Data Objects 2.8 Library
Microsoft Scripting Runtime
Microsoft XML v2.6
'Code1
Call movedata(1, rrow, ecol, erow)
'Contact Person
Call movedata(26, rrow, ecol, erow)
Worksheets("new").Activate
Worksheets("new"). Range(Cells(erow, ecol), Cells(erow, (ecol - 2))).Font.Bold = True
'Name
Call movedata(2, rrow, ecol, erow)
'Street Address
Call movedata(3, rrow, ecol, erow)
'city
Call movedata(4, rrow, ecol, erow)
' zip
Call movedata(5, rrow, ecol, erow)
Worksheets("new").Range(Cells(erow, ecol)).Font.Bold = True
' speed dial
Call movedata(6, rrow, ecol, erow)
the first time font.bold is set to true, it completes w/o error. The bolded line returns 'application defined or object defined error 1004'. Ive tried activating the new sheet immediately before setting bold (like the first time it gets set) but it still errors.
Trying to add a named range at run-time
Here's what I have so far ...
I have problems with setting Validation input title and message. When in column "C" I type product code, data validation of corresponding cell in column "D" changes to list of diameters allowed for that product. That works fine. But i also want to set validation message to show allowed diameters.I set it in VBA using named ranges.
But for every second line (13, 15, etc on attached file) I get an application-defined or object-defined error. The rest (14, 16 etc) works ok.
I am using Microsoft Excel 2010 and Microsoft VBA 7.0 on my system. I would like to eventually create a PowerPoint and insert charts generated in the Excel workbook. In the meantime, I cannot get the basic PowerPoint created.
The line in red is highlighted blue when the compile error "User-defined type not defined" message box appears.
Public Sub TryAgain() Dim myPowerPoint As PowerPoint.Application
'
' do nothing for now
'End Sub
I have set the references such that Microsoft Project 14.0 Object Library is indeed checked. The Excel file only contains this code in a module. All sheets are blank. Nothing else is written yet.