Can't Format A Cell
Nov 5, 2009
I don't know what the hell's going on here, but I have:
=CONCATENATE(IF(S11=1,(U13&Q11))) in cell T11,
where the data I want copied "as is" is: =(R12-Q12)/ABS(Q12), in cell Q11,
where the copy condition is =SIGN(Q11), in cell S11
But instead of the "33%" I need copied (concatenated), I get "0.33333333333333", and Excel won't let me format!! Anyone know why? This makes absolutely no sense at all.
View 9 Replies
ADVERTISEMENT
Jun 12, 2008
I would like to have a single button that changes a range of cells from the USD to EURO to perhaps CAD symbol. Can this operation be performed, such that if I start in dollars, and I click the button once, it shifts by range to EURO (not formulas...just symbol)...and then if I click the same button again, it goes to CAD, and then back to USD with a third click?
View 5 Replies
View Related
Jun 27, 2007
I need in changing the format of sheet2 to exactly like the following image below.
*there are some codes in sheet2 which I think is the place to change the format.
View 6 Replies
View Related
Feb 21, 2014
I have a column in excel which gets populated in the format "2/1/1980" when copied from a different source. I want a macro to run on this column and convert this in the below format. Required format: '02-01-80 (note the ' symbol before 02 which will keep it as text)
Existing ----> Required
2/1/1980 --> '02-01-80
2/1/1970 --> '02-01-70
2/1/1983 --> '02-01-83
I need this macro to run on two columns and replace them with the required format. I can do a find and replace either in the sheet or through hard coding the VBA, but as the date format keeps growing, I would need to do this via code and hence requesting the same.
View 4 Replies
View Related
Oct 20, 2013
I have data in cell A1 that often changes its number format(from $ to %), can i have the number format change in cell B1 whenever the number format in cell A1 changes?
View 3 Replies
View Related
Feb 18, 2009
Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
View 2 Replies
View Related
May 25, 2011
I have a spread sheet and I want to conditionally format rows to be a certain color. That part I'm fine with. But I don't want them to be a set color. I have a "key" of different colored cells that I want to be the fill colors of the formatting. The ultimate goal is that for example the key looked like this
red
blue
yellow
green
then the rows I had would be formatted as red, blue, yellow, and green. But if you were to go into the key and change the first cell from red to purple, then the rows would become formatted as purple, blue, yellow, and green. Obviously I can copy formating by hand using the format painter, but I want it to update automatically.
View 4 Replies
View Related
Mar 25, 2013
Below is my code which isn't formatting the cells it's suppossed to. It looks like it isn't doing anything. I think the issue might be with the highlighted section of my code, but when I go to "Manage" my rules for conditional formatting, excel references the appropriate cell under the "Applies to" section. I am using relative cell references for for the majority of the rest of the code and this section follows a section that selects the correct cell for this conditional format.
Code:
Selection.FormatConditions.Add Type:=xlExpression, Formula1:="=""ABS()>.005"""
Selection.FormatConditions(Selection.FormatConditions.Count).SetFirstPriority[code].....
View 1 Replies
View Related
Aug 22, 2013
Is it possible to change cell format from custom to general or text and keep the cell value
I have this in formula bar: 16/08/2013 4:37:00 AM
which is displayed in the cell as: 16/08/2013 4:37
I want to change the cell format to general but display the same information.
View 2 Replies
View Related
Nov 24, 2013
let's say cell A1 is colored blue manually, how can i format cell b1 to be colored red? is it possible in conditional formatting?
View 7 Replies
View Related
Feb 22, 2012
Cell C3 has "Joe"
Cell X44 is a VLOOKUP that retrieves "Joe"
Let's say Joe goes on vacation. The workbook user goes in and puts a blue fill in C3. Cell X44 would also need to change automatically.
What's needed to make this happen?
View 1 Replies
View Related
May 24, 2012
I have the following data on a spreadsheet created by a formula:
A1: 1.1234
A2. 2.234
A3: 3.34
I have the data formatted to only have two decimal places so it looks like this:
A1: 1.12
A2: 2.23
A3: 3.34
I'm using the following formula in cell B1 to display the values of those cells in a single cell in order A1,A2,A3:
=A1 & "," & A2 & "," & A3
However when the values of A1, A2 and A3 appear in the in cell B1 they appear as: 1.1234,2.234,3.34
Is there a way I can edit the formula or format something so the values in B1 appear as with only two decimal places? i.e 1.12,2.23,3.34
View 3 Replies
View Related
Apr 23, 2014
How to format a cell to be normal color unless cell left of it is not empty and this cell is empty.
And I need to format whole sheet to this rule.
View 1 Replies
View Related
Feb 6, 2007
It is possible to add something in a spreadsheet VBA to colour a cell Green and put a box surround on it if the cell = "Closed" from A7:V65535
Basically I have four conditions for status of a task and i can only use 3 formats on conditional formatting so i need some code to format the last remaining status type which is "Closed"
Got this part of code to make it the correct colour
With Selection.Interior
.ColorIndex = 4
.Pattern = xlSolid
View 9 Replies
View Related
Mar 24, 2007
Macro Based on an input cell’s (e.g. B12) setting of “yes” or “no”, format several other cells (e.g. B20:G20, B23:F23, C26:J26) as follows: keep the existing yellow shading if input cell is “yes”, change to grey shading if input cell is “no”. I would like this macro to run automatically whenever the input cell value is changed.
View 2 Replies
View Related
Mar 28, 2007
If I wanted to highlight a cell if any cell in the range to the right was greater than zero, what formula would i use. I have tried =IF(L1:AD1>0,1) with the result returning for only the cells in column L. Row 3 has no value in column L but a value in column N with no result to highlight the cell.
View 4 Replies
View Related
Apr 8, 2009
I want to convert a range of cells to "number" format from text, and then refer to them in a formula that's somewhere else. However, if I do the format from VBA, I can't get the change to be reflected without the following
View 4 Replies
View Related
Nov 11, 2012
Can I conditions format a cell based on data from another cell?
View 8 Replies
View Related
Apr 2, 2008
Is it possible to make a macro that will go cell by cell and format the last number of the cell as subscript? Here's an example:
Brooks #1H 5Stewart #8H, #9H 8Stevenson D Unit #1H 2150,000 BblsStewart #8H, #9H 8Stevenson D Unit #1H 2Brooks #1H 5Stewart #8H, #9H 8Holasek #1H 5Brooks #1H 5Stewart #6H, #7H 8140,000 BblsRayburn Unit #5H, #6H, #12H 6160,000 BblsHolasek #1H 5450,000 BblsStewart #6H, #7H 8#N/ARayburn Unit #5H, #6H, #12H 6Stewart #6H, #7H 8Holasek #1H 5Rayburn Unit #5H, #6H, #12H 6Stewart #6H, #7H 8Holasek #1H 5
I would like ONLY the last NUMBER of the cell to be formatted as subscript. The cells with "Bbls" would be left as is.
View 9 Replies
View Related
Apr 27, 2009
Is it possible to do the following?
if cell A1 = 6 and cell A2 =5.8 (0.2 below A1) colour cell A2 orange
if cell A1 = 6 and cell A2 =5.5 or below (0.5 or more below A1) colour cell A2 red
if cell A1 = 6 and cell A2 =6.2 / 6.5 / 6.8 (0.2/0.5/0.8 above A1) colour cell A2 green
if cell A1 = 6 and cell A2 =7.2 or above (1.2 or above A1) colour cell A2 green
View 9 Replies
View Related
Aug 17, 2006
Is it possible to lock in the formatting that would require 12 digits even if someone was copying and pasting to the cell?
We are looking to make our users add information into cells in the format 0-00000-00000-0. They are often copy and pasting, thus overwritting the custom format we have in those cells.
I've looked at validation, but custom only works for a formula.
View 9 Replies
View Related
Sep 12, 2006
way to conditionaly colour code all cells in a grid based on cells in other grid: i.e.
gridA
1 1 2
1 2 1
2 2 1
grid B
12 11 14
34 16 53
35 64 23
i want all cell in grid B to be red if the coresponding cell of GridA is 2.
so here "14" "16" "35" and "64" will be red!
View 9 Replies
View Related
Apr 19, 2009
Is it possible to conditionally format a cell based on the value of another cell?
I am trying to organise historic data of a horse racing system I am working on, and I have a column of finishing positions. Obviously if the position is 1, then the horse was a winner, and if the value is over 1, the horse lost.
I'm not sure where I am going with this at the moment, but if I can conditionally format a cell based on the value of another cell it will give me a starting point.
View 9 Replies
View Related
Nov 15, 2006
I have a column with product codes. each code starts with "11P - " and is followed by a 6 digit number. Is there a way that I can format the cell so that have this automaticlly added when I type in the rest of the code. For example if I type "123456" the cell would display "11P - 123456"
I imagine that it is a matter of setting up a custom # format, but I have no clue how to do that.
View 2 Replies
View Related
Aug 27, 2009
I am trying to set up a sheet that will format a cell based on a comparison to another cell. I want to use a diagonal cell format if the cell is less than the comparison cell. I’ve tried this using Conditional Formatting but diagonal formatting is not available.
View 9 Replies
View Related
Jun 6, 2006
Is there a way to build a drop down into a chart so that the user can select which items they want to view on a chart? Attached is a sample file below. Just wondering if there is a way to allow users to select to view all items in the chart or to select just a few at a time to compare and contrast.
View 4 Replies
View Related
Dec 20, 2006
I am using this code to copy a cell to a blank cell below. It works great but I just need to format it to "White Font". I have tried using "colorIndex = 2" but I am not able to do it.
Dim vData() As Variant, i As Long
With Intersect(Columns("B"), ActiveSheet.UsedRange)
vData = .Value
For i = 2 To UBound(vData, 1)
If Len(vData(i, 1)) = 0 Then _
vData(i, 1) = vData(i - 1, 1)
Next
.Value = vData
End With
View 5 Replies
View Related
Jan 15, 2010
Is it possible to change the border and color of a cell using VBA?
Also I need to know how to change the cell's font to Bold.
View 5 Replies
View Related
Dec 4, 2008
I use For Each cell format twice. However i get an error message that says the "For control variable is already in use". Any ideas how to fix this? The first for each cell loop selects a date in a range and uses that date in the code below. In the second for each cell loop, goal seeks are computed for a range of cells.
For Each cell in dates
Set wb = ActiveWorkbook
With wb.Sheets("Issues")
Set dates = .Range(.Range("J6"), .Range("J6").End(xlDown))
End With
For Each cell In dates
cell.Value.Copy
Range("E4").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Set rngdata = ws.Range("P9,T9,X9,AB9,AF9,AJ9").........
View 9 Replies
View Related
Apr 18, 2009
Is there a way to assign a macro to color every other 14 cells in a certain range?
Example: I have 100 cells on a page I want to color every other 14 cell cycle.
View 9 Replies
View Related