I want to convert numbers that were entered into a spreadsheet with commas in them. Since they were entered with commas of course excel reads them as text.
How can I convert them to numbers so I can use formulas.
I'm looking for the VBA command for this function. I tried just recording a macro in where I perform the task but it didn't record anything. Tried it several times even.
View 7 Replies View Relatedwe work with both Lotus 123 and Excel 2003. Lotus will be gone next year, but for now, the official mean to publish our reports is Lotus. With my work, I copy/paste a Lotus page to Excel. I use the following macro to convert Lotus format numbers (which Excel considers as text) to real numbers:
Sub ForceToNumber()
Dim wSheet As Worksheet
For Each wSheet In Worksheets
With wSheet
. Range("IV65536") = vbNullString
.Range("IV65536").Copy
.UsedRange.PasteSpecial xlPasteValues, xlPasteSpecialOperationAdd
End With
Next wSheet
End Sub
Source : http://www.ozgrid.com/forum/showthre...087#post184087. The problem is that I need to send back this data in Lotus. Excel considers decimal numbers with a coma as real numbers and numbers with a dot as a text. This previous macro fixes that. However, Lotus works the other way. Only numbers with a dot are considered real numbers. So I would need to find a way to code a macro that converts any numbers in the Excel sheet to a number with a dot. It's a bit like doing the opposite operation.
I am receiving a monthly breakdown of postage costs by department but the values are received in a text format of 1 234,56.
I need to convert these to numbers.
I have replaced the comma with a full and tried to use =substitute(cell ref," ","") to remove the spaces in those numbers exceeding £1000 but this does not seem to work.
Postage.xlsx‎
How can i convert text columns to numbers in VBA.
View 8 Replies View RelatedI have five columns on an Excel Spreadsheet with questions in each of the columns.
Below each question is a number value. In the rows below these number values the users will be answering the questions with Y or N. When the spreadsheet is complete I would like to replace the Y's with the number value shown under the question and replace the N's with a number value of zero (0).
Is there any easy way to convert these?
We are compiling annual receipts - using Excel spreadsheet numbers to merge into a Word document, but we are losing the cents in the merged document. When we tried converting to text, the cents were lost as well. Example 450.00 becomes 450 - how do we keep the cents - 450.00?
View 2 Replies View RelatedIs there anyway of converting the output (which is 7 and in text form) to a useable number format so that I can take advantage of the VLOOKUP function (instead of getting a #N/A)....
View 9 Replies View RelatedI am using an ODBC database connection to input data into an excel file. When I input the data excel stores the numeric data as text and puts a ' in front of the number. There is an exclamation mark beside the cell which allows me to convert the data back to numeric format. I need excel to do this conversion for me automatically when new data is added to the file.
View 9 Replies View RelatedI have an Excel workbook with around 100 worksheets. All of them have similar columns, but the values are stored as text. The length of columns and missingness is different in different worksheets. I will be grateful if any of you could suggest a VBA that could convert the numbers stored as text back to numbers. I have been looking for an answer for a while, but cant seem to find one that automatically looks at every worksheet and converts text into number.
View 1 Replies View RelatedI have a spreadsheet that imports data in column A with quatation marks foe eg "7000", "7101A" etc
I would like VBA code that will convert these into numbers.
I need the formula to separate the numbers with commas in a cell to other columns as shown in sample.
This data comes from internet and automatically updating certain intervals, so the text to columns option has no use.
I know from searching through the internet you can change the intervals by modifying the minimumScale, maximumScale and MajorUnit fields of TickLabels. What I want to do is change the period of the axis label to a comma. For example,
if it shows
10.00
5.00
0.00
I want it to show
10,00
5,00
0,00
I have the following syntax in B1: "1,2,3,5,6". and I need VBA to take the very last number out of that list, and increase by four in single steps. For example: before the code: "1,2,3,5,6" and then after it "1,2,3,5,6,7,8,9." The code must be flexible, though, because it will be running within another Macro, and it must work whether the last number in the list is 1 digit ("...4,5,8"), 2 digit ("...34,35,36") or 3 digit ("...111, 113, 114"). Those three examples would be changed into "...4,5,8, 9, 10, 11" "...34,35,36, 37, 38, 39" "...111, 113, 114, 115, 116, 117".
View 4 Replies View RelatedSo, I have a list of data like this:
Type
Variety
Country of Origin
Price
[Code]....
Obviously I can do this using text to columns and transpose but typically I'm dealing with much bigger sheets where being able to do this automatically is a big time saving.
The column with commas in it can vary in position so I'd like this to work on the cell/column that is selected.
Ideally I'd like it to work it's way down the sheet expanding out every comma separated list in the selected column in this fashion but even something that worked on the current cell would be handy.
I think roughly I need to split the cell into an array using the comma as a seperator, possibly scrub the spaces from the text, copy the row as many times as there are things in this array (using ubound?) and then transpose the array into an area starting at the selected row and going down as far as there are things in the array but a bit lost with actual implementation.
table.tableizer-table {
border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif;
font-size: 12px;
}
[Code]....
I need to insert text seperated by commas into excel. Text goes something like this:
go,back
run,hide
jump,dive
etc.....
I need to insert the text so that go, run and jump are in column 1 and back, hide and dive are in row two. I used to know how to do this but I forgot.
I would like to export some data from excel to a text file. An example of text in excel is as below. which each number is in a separate cell.
1
12
123
1234
I tried to exported it as csv format and open it with text editor. it become
1,,,
1,2,,
1,2,3,
1,2,3,4
,,,,
,,,,
,,,,
however I would like the text file looks like this with a space between each comma.
1
1, 2
1, 2, 3
1, 2, 3, 4
What the best way to do it?
I have a spreadsheet that is produced by a macro. This spreadsheet has a table of 30 rows and 24 columns pasted into it from another spreadsheet. The first 6 rows of vary between containing 1 and 6 columns of data. The next 17 rows always have 24 columns of data. The last row has 1 column of data. The macro saves this spreadsheet as a .csv file. The macro works great, but when I open the .csv file in notepad all the rows have 23 commas, even for the rows with only a few columns of data. Here is a shorten example of the file when opened in Notepad....
<GTS-IPL-Customer>,,,,,,,,,,,,,,,,,,,,,,,,
H1,October,2007,,,Normal,,,,,,,,,,,,,,,,,,,
H2,000426,,,,,,,,,,,,,,,,,,,,,,,
H3,2.72283E+12,,,,,,,,,,,,,,,,,,,,,,,
H4,88100031,,,,,,,,,,,,,,,,,,,,,,,
H5,NBPL,,,,,,,,,,,,,,,,,,,,,,,
D,10012007,0,312,2,310,304,1006,306,306,4,4,31,4,0,0,0,,,,,,,5.805,-23.22
D,10022007,0,334,2,332,330,1009,333,639,-1,3,33,1,0,0,0,,,,,,,6.165,6.165
D,10032007,0,316,2,314,302,1045,316,955,-2,1,31,2,0,0,0,,,,,,,6.675,13.35
Is there anyway to have the macro not insert the commas in the first 6 rows for columns on the right side of the last column of data? I need the data to be formatted in the format shown below.
<GTS-IPL-Customer>
H1,October,2007,,,Normal
H2,000426
H3,2.72283E.....................
im working on making a price list from a pdf file. however, the pdf file has the prices in euros listed as 1.300,00 and 765,00 and 45,00 and 1.565,00 . i was wondering if there was a tool or so in excel that can change the comma and periods in the number so they read as american format like 1,300.00 and 765.00 and 45.00 .and also if there is a formula or so to convert these numbers to Dollars in another column.
View 6 Replies View RelatedI have a HTML table with a column with numbers like
3.6
2.5
1.8
....
and so on...
When I'm trying to open this table in Excel (.csv or if I cut n paste from HTML) Excel keeps converting it to date format.
03.jun
02.may
01.aug
This wouldn't be a problem if I could only go to Format -> Cell and choose Standard or something.
The problem is it ends up like this then:
39236
39204
39295
WTF? :D
I want this!
3.6
2.5
1.8
....
I'm having issues with my code for converting numbers to words I've tried a couple and I keep getting a Syntax error on
Cents = GetTens(Left(Mid(MyNumber, DecimalPlace + 1) & _
"00", 2))
I've tried a couple of different codes and I keep getting errors
yes i have enabled macros
I have 0,1,2,3,4,5...etc in Column A. How I could convert this into time format? Preferably with vba code?
Sheet1 Â AB
1001/01/2012 00:00:002101/01/2012 00:00:013201/01/2012 00:00:02
4301/01/2012 00:00:035401/01/2012 00:00:046501/01/2012 00:00:05
I have this value in a cell 38761.8296804781 which is displaying as 38,762. I want to display it as $38,761,829. Is this possible without going through each cell and moving the decimal point?
View 3 Replies View RelatedWe are doing a database conversion and I have been tasked with converting all our old promotion codes to a new system. The long and the short of it is this:
I am trying to write an equation that will look at two cells (say A1 & B1) which when put together could be one of the following numbers (01,02,03,04,05,06,07,08,09,10,11,12) and translate them to a letter (A,B,C,D,E,F,G,H,J,K,M,N)
So 01=A, 02=B and so on...
I was trying to use if statements, but there are too many.
Do you know if you can use the cell formatting to change the sign of a number? For example, the cell contains 123.45, but I want it to show as -123.45. I don’t want to use a formula to multiply by -1, because the data is being extracted from a database and I have to do a fair amount of work on the report with the formulas to do that.
I can format the number and it shows a minus but will not use the minus if I then use it in a calcualtion. I could use a calcualtion with a *-1 in it but for ease of use by other users who may take part of the Excel report it would be better if I could format the number to negative.
I am using decimal and hexadecimal numbers. On a worksheet I can use all of the normal functions for this problem (Hex2Dec etc). I have loaded the Analysis toolpack, and also have an add-in loaded (but do not know how or when) that is called Analysis ToolPack VBA. In VBA I can use the fnction Hex to convert from decimal to hex, but there does not seem to be a reverseof this function. Am I missing something obvious or is this a 'hole' in the available functions? Is there a reference I ned to add in the VBE? if I try to use the worksheet function in VBA then I get a Value# error.
View 7 Replies View RelatedI received a complaint from one of my colleague that he is facing sudden problem with Ms-Excel(2002)
The problem is When he feeds number 2 in to a cell it automatically converts in to 0.02. I tried using "Decrease decimal" and "format cells" option and even through uninstalling office and reinstalling a different version but the problem still continues.
I have exported a dataset with references numbers and I want to convert those reference numbers into the titles they refer to. I have a separate sheet that matches the reference number to the title and would normally use a LOOKUP function [=LOOKUP(A2,Key::Table 1::A,Title)] to do this but, in this instance, I have multiple reference numbers in a cell separated by commas. How can I get the function to lookup multiple numbers from the same cell?
View 1 Replies View RelatedI have numbers from -50 to 50 going down column C. In column D, I want to enter a formula which will convert each number to a TRUE or FALSE. How do I do that?
I believe 1 = TRUE and everything else = FALSE, but I would like to know how to get that with a formula.
I'm opening a file in Excel, and it automaticaally changes a lot of the numbers to dates. How can I turn this off in the settings panel?
View 10 Replies View Related
