How does one select a range with multiple rows and columns, then select the cell in any one corner of that range. What does the "Set" command do?...is it used when an inputbox command is assigning a range instead of a value to a variable
I am having some trouble with a variable range selection within a regression. I keep getting an "application-defined or object-defined error." I've isolated each statement to find that the code that is causing the regression not to work is below (the error for that line of code states that the Select method of Range class failed):
How can I add rounded corners and a drop shadow to the code below for a graph.
Code:
Sub AddAICharts() Dim co As ChartObject, endf%, i%, r$, sname$, suffix '~~~ Suffix allows the code to be manipulated more easily with changing the sheet name but keeping the Suffix the same suffix = Array("A", "B", "C", "D", "E", "F", "G", "H") For i = LBound(suffix) To UBound(suffix) '~~~ name of sheet is currently set for Objective sname = "Data" & suffix(i)
I've just started with VBA coding and I'm absolutely stuck with one problem I have had for weeks!
I litterally spent days looking for an answer on google, unsuccessfully of course. So here I am
Right, so the problem is the following:
I have series of bar charts (up to 10) with some relationships between them, and I want to highlight those.
Here is a screenshot:
or here: View image: Untitled
I know how to move the shapes automatically, etc. Yet, the big issue I'm encountering is that I can't find a way to get the position of the circled points!
I tried every possible way with GET.CHART.ITEM but the best I get is the top of the bar and not the points inside of it...
I am looking for a Macro that will allow me to update the range of a Defined name range such as every time I add a name into the list, the only thing I will be doing is passing the client name and the list of client will be automatically updated and my drop down ListBox will show the new client name, which can be selected by the user.
Say i have a range A1:B3 and i define it as "Fruit", but then later decide i want to call it "food", or even just revert back to cell numbers. How would one go about doing this?
I need the macro to create a named range based on a last column and row that can change. It won't change once the report is set up, but since this is a template that will be used for hundreds of projects, it needs to be flexible to accomodate a varying numbers of columns or rows
The starting cell will always be A10, but the ending cell can change depending on how many columns and rows are in the table.
Right now, the code I've created is
Sub NamePivotData() Dim LCol As Long Dim LRow As Long Dim RngEnd As Long
[Code].....
I need it to refer to ='Calendar Setup'!$A$10:$*$** where * is the last column in the table and ** is the last row in the table.
I have a spreadsheet that has 7 columns starting at B and 12 rows. Column B has numbers from 1 to 12 down the rows. I have an inputbox that asks the user for a number from 1 - 12 that relates to a tax period. What I'd like to do is depending on what number they give have that define the range. If they gave me the number 2 my range would be C11:F11, if the number was 10 the range would be C7:F7. The inputbox returns strTaxPeriod.
In several places in my code I need to define ranges and save them in Application.Names. I need to be able to reference the last row and column in that range but I don't know how. Is there a reference within the Range object for the boundaries used to create it?
ie, the B3 in Range("A1:B3")
Not all of the ranges will have content in them and many of them will overlap, so looking for the last non-blank cell won't work.
I have a number of data sheets in excel 2010 and I have price lists for various countries I need to automate a price book type thing whereby I create a formula which reads something like: Vlookup(X,=B1,3,true) whereby the cell B1 will be the result of a formula to return the country I need the pricing for. I have the ranges setup as things like: "Australia", "France" etc and the cell B1 shows this its value based on a previous lookup. Is it possible to get this to work?
In the attached sheet. Cell C6 represents the concatenation of aspects of a product. I want to know if it is possible to use that cell as the named range (there is a corresponding named range) in a lookup. The lookup gives me the product code.
i created list in Excel and i wrote into (a1 cell-income, b1 cell-expence, c1 cell-kredit and d1 cell-debet). i enter a2 cell income (for ex:1000) and b2 cell expence (for ex: 100) and I give condition in VBA that if income greater than expence then VBA writes a2.value-b2.value into d2 cell else if expence greater than income then it writes b2.value-a2.value into c2 cell but i only define this one row (for ex: c2, a2. b2. d2).
i would like to assign it the rows as long as i want that is i would like to create loop (for ex: a(i), b(i) and so on
I need to obtain the max value in a column of numbers (DJ3:DJ242) with the range of the cells considered, set by a slider that produces a value between 1 and 500 in cell BD51
I am trying something out the ordinary, instead of hardcoding the Range, I want o find the last used row of the Range and append, then filldown. I think my idea is good, but either syntax is off or not going to be allowed to do this.
I have a list of numbers in Column A and in Column B I have a standard Sum formula which sums the adjacent number in Column A and the four numbers before it.
A B
1 =Sum(A1:A5) 3 =Sum(A2:A6) 5 ... 3 ... 5 6
I would like to have a formula which references another cell to define how many rows to sum from the starting cell. So in the above example, the total number of rows which are added together is 5. If I wanted to change all of the SUM formulas to add 6 rows, I would like to be able to change the number in the reference cell to 6 and all of the sum formulas would switch to adding 6 rows.
Trying to convert an Excel 2003 macro to work in Excel 2007.
The problem line is
Dim MyDataObject As DataObject
I suspect the problem is a Missing Reference, but I cannot figure out which one. I have the same ones (in 2007) as 2003 except for one which is not showing
Microsoft Forms 2.0 Object Library
Is this the one it needs? It is called something else in 2007?
The ones I do have ticked are
Visual Basic For Applications Microsoft Excel 12.0 Object Library OLE Automation Microsoft Office 12.0 Object Library Microsoft ADO Ext. 2.8 for DDL and Security Microsoft DAO 3.6 Object Library Microsoft ActiveX Data Objects 2.8 Library Microsoft Scripting Runtime Microsoft XML v2.6
the first time font.bold is set to true, it completes w/o error. The bolded line returns 'application defined or object defined error 1004'. Ive tried activating the new sheet immediately before setting bold (like the first time it gets set) but it still errors.
I have problems with setting Validation input title and message. When in column "C" I type product code, data validation of corresponding cell in column "D" changes to list of diameters allowed for that product. That works fine. But i also want to set validation message to show allowed diameters.I set it in VBA using named ranges. But for every second line (13, 15, etc on attached file) I get an application-defined or object-defined error. The rest (14, 16 etc) works ok.
I am using Microsoft Excel 2010 and Microsoft VBA 7.0 on my system. I would like to eventually create a PowerPoint and insert charts generated in the Excel workbook. In the meantime, I cannot get the basic PowerPoint created.
The line in red is highlighted blue when the compile error "User-defined type not defined" message box appears.
Public Sub TryAgain() Dim myPowerPoint As PowerPoint.Application ' ' do nothing for now 'End Sub
I have set the references such that Microsoft Project 14.0 Object Library is indeed checked. The Excel file only contains this code in a module. All sheets are blank. Nothing else is written yet.
I have a very strange problem in DEBUG mode, because i get this error "Application-defined or object-defined error" when referring to a cell and assigning it a value so it goes to my error handler and i have a Resume Next there. It continues to go through the code whilst continuing to go to the error handler but when i step out of the function it restarts again from the beginning on the called function and then on the second run of my code it seems to WORK!?! So i'm thinking what the hell is going on, it falls over and fails the first time round and works the second time round? In free-run mode from excel i just get a #VALUE!