I have 7 worksheets, each worksheet has a range of data, in the first instance 10 numbers in cells A1:A10.
I'd like to copy this range and paste it into another worksheet within my workbook.
Is there a way to do this, possibly using Dim WS as Worksheet and then using a For Loop?
Another problem I have is the necessity to paste the data from a columnar format into a row format, ie A1 stays as A1, but A2 would become B1 and so on..
I have an array that will open specific workbooks. But Now I need to append a Case Number to the beginning of the file, and I don't know how to cycle through two Arrays. I have been setting it up as:
Code: Dim Report Dim Reports Dim WB AS Workbook Dim WS AS Worksheet
For Each Report in Reports Then I open the workbooks and print them. Next Report
Now I want to add in a 2nd Array, that will Append the 1st item in CRN to Reports, then the 2nd item in CRN to 2nd item in Reports. So it would look something like this.
Code: Dim Report Dim Reports Dim CRN Dim CRNS Dim WB AS Workbook Dim WS AS Worksheet
I'm a novice with VB, so go easy on me. I'm trying to write a macro to copy the same couple of cells from hundreds of excel files and paste them into one summary file. What I've written so far is:
I have watched the code while running. The initial date FDateS and FDate(t) value is m/dd/yyyy (9/16/2010) and no time. FDateS has different amounts of time added to it. The issue I have encountered is that once it passes midnight, the date does not change but the time reflects the change to 00:00:00.
Public FDate(1000) As Date Public FTime(1000) As Date FDate(t) = CDate(Mid(FindData("sm_Sys_BatchOpenTime"), 1, 10))
For H1 = 1 To n FDateS = FDate(H1) For r =1 to 50 FDateS = CDate(FDateS) + CDate(FTime(r)-Ftime(r-1)) Next Next
Any way to cycle through two ranges and fill in blank cells. The worksheet has a "header"(A2:H2) that bascially determines how the rest of the sheet will be filled out. This header is subject to change if one of the headers is changes(see PLAN, and TRAN CODE in example).
The SRC and AMOUNT(CASH) fields will always be complete. What I'm trying to do is cycle through AMOUNT(CASH) and if the field is not blank to then cycle through crng lookig for blank cells. If the cell is blank it should copy the cell above. This is where I'm headed but it will cycle through the same crng(A3:H3) every time.
Public sub Line_Check Dim ccell As Excel.Range Dim crng As Excel.Range Dim hrng As Excel.Range Dim hcell As Excel.Range
I need to pull out daily staff location schedules from a 20wk cycling rota. and produce daily shedules for staff and more detailed for the wolves above. Attached file gives an idea of what I am trying to achieve.
Just need to delete some hyperlinks in column A on 50+ worksheets. Thought a loop through all the worksheets would do it. Only works on active sheet. Forgive my ignorance, don't really even know where it goes, once it works - module or workbook?
Let's say I have a workbook with 7 worksheets named, for example, "Instruction", "Begin", "Worksheet 1", "Worksheet 2", "Worksheet 3", "End", and "Data". (in that order)
What I want to do is run a macro to go to whatever worksheet that is in between "Begin" and "End" and copy, for example, cells $C$1:$D$10; then paste as formula into worksheet "Data" starting from cell C1 and then down a list (i.e., copied cells from "Worksheet 1" get pasted as formula into "Data" cells C1:D10; then copied cells from "Worksheet 2" get pasted as formula into "Data" cells C11:D20, and so on and so forth).
But if I were to add more worksheets (e.g., "Recipe" and "ToDo") positioned in between "Begin" and "End" and run the macro again, it'll either 1) re-copy all the formulas from the included worksheets back into "Data" including the formulas from the newly added/placed worksheets or 2) it'll add the formulas from the newly added/placed worksheets and paste into "Data" at the end of the list.
Can create the macro to run based on the position of worksheet, and not based on the name of worksheet, since ultimately there will probably be over 10 worksheets between "Begin" and "End".
I'm trying to perform the same process to all the worksheets in my workbook. This is the code I have now, but it will only apply to the single active worksheet:
How do I modify this macro so that the worksheet array will select all the worksheets except sheet 1?? My workbooks will have varying numbers of worksheets ...
Instead of just counting all worksheets I want to count the number of worksheets between 2 control worksheets (Start and End). Reason for this is that I have a Workbook that grows weekly and each new worksheet is inserted after "Start". I have a macro that lists the Worksheet names but it grabs all and I only want those between Start and End.
I need to write VBA code to clear all Values, all values beginning with an = sign for eg = 9725, except formulas and text on all my worksheets, except the last 2 worksheets.
I have a large data file, to make work easy for myself i have seperated each section into different worksheet. well my problem is. i want to use this very simple method for SUM "=SUM(A1+A2+A3)". If I am doing this on a same worksheet its no problem at all.
Is there any way to use this same simple method between different sheets? like. Sum of A1 of sheet1 + A1 of sheet2 + A1 sheet3 here.. A1 is a cell and sheet 1 onwards are different sheets
I need to add a row in tab "Clients", every time I have a new customer. Then I need to add that same row in another tab "Master". I tried using a macro but it copies the same row with the same information again and again.
Basically i need to add a row, put in some info and that automatically the same row is added in another tab.
how to get the maximum value from two worksheets and displays the output or maximum value on another sheet? I have attached a sample worksheet. Sheet 1 and Sheet 2 contains values to be compared while sheet 3 should contains the output or maxed value.
I want a UDF to copy a data range, add a new worksheet and paste the range into it as part of a function calculation not a user interface macro.
I simply cannot add a worksheet from a Sub that is called by a Function, only by a Sub launched as a macro. As shown below - the Function quits at Sheets(SheetName).Select as there is no such Sheet.
It seems that VBA cannot add worksheets from UDFs. Does VB .Net do this? How can I add sheets within a UDF without user interface objects?
run a code that passes the word alarm from worksheet 3 to worksheet 2 as 100 instead of as the word alarm..... but i need it that it can copy the number 100 on any cell range between cell 2 to cell 10 on worksheet 2 depending on the other data i copy
Is there any way that you can combine two worksheets or Excel files, for example: WORKSHEET_1 has columns and values as: firstname lastname city state
WORKSHEET_2 has coulms with NO values as: firstname lastname address city state phone
I want to take the info from WORKSHEET_1 and insert it into WORKSHEET_2 without specifying any columns since WORKSHEET_1 might sometimes have only 1 column and sometimes might have all 5 columns.
The purpose of this is to create a standardized Excel file that I need to import into a Database, however the users might have Excel files without all the columns required therefore I need to "standardize" the worksheet before being imported and have any black values import as NULL into the Database
I have 5 Sheets and want to ADD a particular cell say A20 from 4 of the sheets onto A20 on the 5th Sheet. In Lotus 123 sheets are identified as A:a20, B:a20 etc How are they identified in Excel?
I'm looking for a function to look up a value from other worksheets after selecting a person's name from a drop down list. Here is an attachment to further illustrate.
I'd like to update some of the hardcoded numbers to functions that would pull from lookup tables. However, when I enter this in A1,
="Blah, blah "&B1&"."
In a "fresh" spreadsheet I get "Blah, blah 2009." , in cell A1 where B1 has 2009 typed in. In a "stale" spreadsheet I get "#VALUE!" in cell A1 (with 2009 typed in B1).
I've tried right clicking--> format cells and then changing to a variety of formats w/no luck at all. The only thing that works is to create a new sheet in the workbook and reformat the table and cells by hand. Clearly this is an ineffective workaround.
So, exactly what is the property that I need to reset in the "stale" worksheets that will allow, ="Blah, blah "&B1&"." to be read properly?
I've being asked to create this awesome new spreadsheet that summaries data from two other spreadsheets. I personally have no idea about excel but have gotten quiet good with the vlookup and isna formulas etc and so far so good. Till i had to search for a value over 12 worksheets. Ive tried Vlookup using an indirect formula using named cells etc i found but i cant work it out and all this reading has turned my brain to mush. So what im trying to do is:
I have a new spreadsheet called summary. What i need to do is pull sales data through from a spread sheet called "Sales Orders_2009". In the spread sheet there is multiple tabs, 12 of which i need to search. The tabs are called SalesJan, SalesFeb etc. On each tab i need to search in the data range B10 to I34. In the Summary spreadsheet i type an invoice number into A2 and that is the lookup value to search for across the 12 worksheets.