Decimal Places For Close Ties Of Numbers Based On Cell Value
Apr 15, 2008
I have a pivot table of values displaying agency's performance based on their sales percentage to target. When the race is 'loose', and all companies are 1 or more percentage point away from each other, I format the values without decimal places. If two agencies appear tied, I add a decimal place to seperate them. Occasionally the race is really tight and I have to increase the format to two decimal places to seperate them. how to do this automatically?
View 4 Replies
ADVERTISEMENT
May 24, 2008
I have a column of numbers with one decimal point and some blank entries too. I need to convert all the numbers (including the zeros, but not the blanks) to two decimal points. Any idea on how this can be done?
Examples: 0.1 needs to become 0.10, 0 needs to stay 0, a Blank cell needs to remain Blank.
View 9 Replies
View Related
Mar 19, 2009
I was trying to decrease the decimal places of the data figures that I'm currently working on my report, however, it keeps rounding-up the decimal numbers. I wish to keep the original numbers and just decrease the decimal places.
For example:
The original figure is = 7260.12903225806
Upon decreasing the decimal figures to just 2, the result became = 7260.13
Is it possible for me to just have this result = 7260.12 instead of 7260.13?
I've tried using the TRUNC formula butit does not work if the 2nd decimal value is 0.
For example:
The original figure is = 227161.905808985
Upon applying the formula, the result became = 227161.9 instead of 227161.90
View 4 Replies
View Related
Jun 4, 2008
I am wondering if there is any way to "force" a number to have three decimal places instead of two and still have that number valued as a number for use in formulas later (like AVERAGE, etc.).
What I have is a combination of HLOOKUPs, IF statements, and Conditional Formatting.
I have a Master Grades sheet and individual Class sheets. I use an HLOOKUP, matching a Student Number in both sheets, and looking in the Class sheet for the P/F indicator. If the indicator is a F, the HLOOKUP is to return the Final Grade from the Class sheet and input that into the Master Grades sheet, forced to three decimal places (whereas the numbers in the Class sheets are at two decimal places) If the indicator is P, the HLOOKUP simply returns the Final Grade from the Class sheet and inputs it into the Master Grades sheet with two decimal places.
I have the failure grades forced to three decimal places so that the Conditional Formatting in the Master Grades sheet highlights the failed grades for teachers and anyone else can see right away that a student failed, but the number still allows the Master Grades sheet to calculate the overall AVERAGE for the student as well as the AVERAGE for that class.
If any of this is not quite clear, please ask and I can further expand on what I am doing.
Here is the code I have right now that is not working correctly (and I know why it's not): ....
View 9 Replies
View Related
Feb 27, 2014
I need a formula to take a number with several decimal places and round it up to two decimal places to either .33, .66 or, .00 if its above .66.
For example, 4.23423423423423 will be 4.33
4.43453453533434 will be 4.66
4.8353453453 will be 5.00
Lets say the number is in cell A1. What formula would do this?
View 3 Replies
View Related
Jun 22, 2009
I am converting values from SAE to Metric and wish to retain the decimal places of the SAE value before converting.
My code below converts nicely but doesnt maintain decimal places.
View 8 Replies
View Related
Jan 16, 2010
What do I need to add to this code to set the decimal places to zero?
View 2 Replies
View Related
Aug 13, 2009
I have a vba macro that takes data from one workbook and pastes it into another workbook. In doing this I have declared a few variables of type single (I only need two decimal precision). However, when I copy the values from the cells on the source workbook and paste them into the target workbook, the numbers end up having 12 decimal places. Ultimately, this extra precision causes my totals to be off by .01 or more after a while. I have tried rounding the number as I pull it off the source workbook into the variable, but that didn't matter. How do I solve this problem? Code for pulling data from source workbook:...
View 2 Replies
View Related
Dec 11, 2008
I am doing some calculations via Excel, and I have found that I get different results using a calculator. I know that by formatting the number, I can show as many or as little decimal places as I like in any cell, but can anyone tell me how many decimal places Excel actually uses when it's carrying out calculations? I have a feeling that the Excel results I'm getting might be more accurate than my calculator ones.
View 2 Replies
View Related
Feb 24, 2010
if I change the formatting of a cell to 2 decimal places, it appears as two decimal places (as it should) for example $88.88888 will show as $88.88
However, when I use this data in another application that displays this data it will display as 88.88888 still. I need to actually take the value and truncate it to 88.88 eg 8.8888888 will become 8.88
I have been using trunc by hand and wanted to try and find out if there is a way that I could write some sort of macro to do this for me each time.
View 14 Replies
View Related
Oct 23, 2008
How do I stop a user from entering more than 2 decimal places?
If I format the cell to "0.00" I can still type in 1234.1234 and it will display 1234.12.
If I select that cell, the value in the formula bar is still 1234.1234.
View 9 Replies
View Related
Jul 27, 2007
Is there a function in VBA that lets me increment or decrement the number of decimals of a particular cell? let's say i got a cell value of 7.123456 but excel only displays 7 on the cell. What if i want excel to display only 7.123? How can I specify the number of decimals i want on a particular cell (in this case 3)
View 2 Replies
View Related
Jun 10, 2009
I need to convert a column of numbers currently formatted with 2 decimal places e.g. 112.12 to 4 decimal places (without the decimal point). I need the end result to be 1121200. I've tried a few different suggestions given on the forum previously but can't seem to retain the 4 decimal places that I require.
View 4 Replies
View Related
May 10, 2014
AVERAGEIFS(X$2:X$1000,$AT$2:$AT$1000,1)& TEXT(BE2/BD2," 0%")
The formula is working , but the result is : 3.50239234449761 58% Formatting the cell did not work. Can these decimals be slashed?
View 5 Replies
View Related
May 29, 2014
content from form is captured via formulas to a CIMLoad format on another tab
Users keep entering four to six decimal places in weight value
I need to limit the cell to either whole numbers, or a maximum of 2 decimal places
The cell is formatted to two decimal places, but when you activate the cell it shows the full value they entered, and so does my CIMLoad
How to I limit the value in this cell to whole numbers or numbers with a maximum of two decimal places?
View 7 Replies
View Related
Dec 3, 2013
I have a list of cells that has two values concatenated. The first I would like to round to 2 decimal places, and the second is always a integer
Consider this formula..
Code:
=IF(SUMIFS('Analysis Data'!$I$5:$I$1840,'Analysis Data'!$C$5:$C$1840,3,'Analysis Data'!$E$5:$E$1840,1)=0,0,SUMIFS('Analysis Data'!$I$5:$I$1840,'Analysis Data'!$C$5:$C$1840,3,'Analysis Data'!$E$5:$E$1840,1)/COUNTIFS('Analysis Data'!$C$5:$C$1840,3,'Analysis Data'!$E$5:$E$1840,1,'Analysis Data'!$I$5:$I$1840,">0"))
&"("&COUNTIFS('Analysis Data'!$C$5:$C$1840,3,'Analysis Data'!$E$5:$E$1840,1,'Analysis Data'!$I$5:$I$1840,">0")&")"
In one cell this yields the value;
2.42553191489362(47)
In another it yields 2.975(40)
and so on..
I would like to format it to display as 2.43(47) and 2.98(40)
FWIW this means average of 2.43 games refereed per session in 47 sessions of refereeing.
View 3 Replies
View Related
Mar 5, 2009
I require a custom data validation formula to limit cell value to maximum of 4 decimal places.
0.0001 ok
0.02 ok
0.3 ok
0.12345 fail
0.123456 fail etc
View 2 Replies
View Related
Aug 5, 2013
I was going to use the following to test that a number has no more than two decimal places,
Code:
If Int(ActiveCell.Offset(0, 8) * 100) ActiveCell.Offset(0, 8) * 100 Then
However it is rather mysteringly failing when activecell = 16.99 or 17.99; on testing it appears that vba is evaluating Int(ActiveCell.Offset(0, 8) * 100) to equal 1698 or 1798
View 1 Replies
View Related
Aug 2, 2006
I am facing a problem with Excel's Concatenate function. I am trying to make a text string with numbers from a cell. =CONCATENATE( "price paid= ", D23). D23 is a numreric cell, formatted for one decimal place. However, the text produced by above function is showing me two decimal places of the number in D23.
View 4 Replies
View Related
Sep 4, 2006
I am creating a Daily Cash Count worksheet for a business to do their daily closeout paperwork. What I am trying to do is automatically apply decimal formatting to a cell. Examples, if they count 60 cents in nickles and enter 60 in the cell, it automatically converts it to .60. And if they count 7.50 cents in quarters and enter 750 in cell it automatically would convert it to 7.50.
View 7 Replies
View Related
Oct 16, 2006
I'm trying to work out a formula in excel which requires me to use Pi to over 30 decimal places. Excel will only let me have 30 decimal places of Pi whether I copy and paste it as a number or use its Pi function and even then seems to round up. Is there any way I can get more than 30 decimal places for this calculation? If not in excel then can anyone suggest another programme that may be capable of this? You can post here or contact me at [email=" Deleted by Jack in the UK[/EMAIL]
View 2 Replies
View Related
Nov 30, 2006
Is it possible to apply some kind of formatting to a range, that will force all numbers entered into that range to have the same number of decimal places as the cell with the maximum number of decimal places?
View 9 Replies
View Related
Jun 6, 2007
Everytime I enter a number, excel automatically converts it to a decimal number.
I type 1 in a cell (or formula box)
Excel returns the value as 0.1
I think it may have to do with the FIX box highlighted to the bottom of the screen. (To the right side of the NUM lock). (I can't paste a screen dump to show the FIX box position). how to remove the FIX box, and/or change excel so that I can enter in numbers normally.
View 3 Replies
View Related
Jan 21, 2005
I want to show (in a cell) how much decimals there are after a comma.
View 9 Replies
View Related
Jun 5, 2014
Is there a way to format a number into 2 decimal places and when you select the cell you wont see the true value?
For example:
316.2696
I still see the 316.2696 when I click the cell. Instead of 316.27 only.
View 4 Replies
View Related
Mar 13, 2014
I'm on Excel 2010 and I need to round up a complete price list to a 0.90 decimal.
Here is the formula that I have in my cell : =((J5-(J5*N$2))*M5) I need to round the result to XXX.90
View 4 Replies
View Related
Jan 15, 2009
I am using Excel 2003. I am attempting to use the Accounting format with numbers that should not have any decimal places (although what is entered might have a decimal place). The numbers line up fine on the right, however, the dollar signs on the left are not lining up. It looks something like:
View 4 Replies
View Related
Nov 23, 2009
I have a simple spreadsheet that allows the user to enter a dimension in metric or inches. I want to display the other units in the adjacent cell. In cell A1, the units are "Metric" or "Inch" in a pull down list. In cell A2, the value is entered.
In cell A3 i want to show the value in the other units. So if A1 is Metric, then take A2 and divide by 25.4. And if A1 is Inch, then take A2 and multiply by 25.4.
Also, if A1 is Inch, then display 2 decimal places in A3, and if A1 is Metric, then display 3 decimal places in A3. Is this possible?
View 3 Replies
View Related
Feb 11, 2013
How do I write a formula to round the decimal places in a number in set increments. For example;
a) 14.28 to the nearest 0.25 would result 14.25
b) 1.99 to the nearest 0.1 would result 2.0
c)2.97 to the nearest 0.25 would result 3.00
View 2 Replies
View Related
Apr 8, 2013
Using Excel 2010
Workbook with 21 sheets, first sheet is the summary sheet (named SUMMARY) taking all it's content from the other sheets, named from 1 to 20, which are all laid out the same, but contain different data.
My problem is that I want to get rid of decimal places that are being brought into the SUMMARY sheet
In sheets named 1 to 20, I am using the following formula in H23 to arrive at a figure =IFERROR(100/(B5/B23),0) in H23
B5 and B23 are always whole numbers on all sheets 1-20, result can be whole or contain decimal places which I round up in the cell to show no decimal places
On sheet 1, B5 is 200 and B23 is 5, giving 2.50 as the answer, which is right, I have H23 set as a number cell with no decimal places so it rounds up to 3 which is what appears in the H23 cell.
All of the above is correct and appearing as I want it on the sheet, the problem arises when I import into the SUMMARY sheet as follows:
On the SUMMARY sheet in cell B59 I want the following to appear 5 - 3 but am getting 5 - 2.5 using the following formula
='1'!B23&" - "&'1'!H23
The first part is fine as B23 will always be a whole number
How can I stop it from bringing in the 2.5 and get it to bring in the rounded up 3 into cell B59
I have cell B59 set as a number cell with no decimal places but it still appears as 2.5
Also when I correct it as it appears a lot on the summary sheet, how do I get the following to happen
='1'!$B$23&" - "&'1'!$H$23
if I fill the above across columns how to I get the two '1' s in the formula to become '2' then '3' as I fill across.
View 4 Replies
View Related
