Enbolden Font In Array

Jun 13, 2008

where do I add the font.bold = true if I want to make this part of the array in bold only?



rProd.Offset(3, 0).Resize(, 6) = Array("HandOver By:", "", "", "", "", "Received By:")
.Font.Bold = True

View 9 Replies


ADVERTISEMENT

Comparing Two Cells Based On Text, Font, Colour, Font Size Etc

Jun 3, 2006

I'm looking to set up a spreadsheet whereby individuals answer questions and have to format their answer using a particular font, colour, font size and so on. The idea is that I can then compare their answer sheet to a pre completed one using an =IF function and get a total score. The only problem is =if and =exact only lookup cell text/numbers and don't look at how the text is formatted within them.

View 9 Replies View Related

Treating String As Array And Correct Array Format For Unicode Characters?

Jul 30, 2012

in C a string is nothing more than an Array of characters ending with a null character.

in VBA this does not seem to be the case.I am trying to use the BlowFish code from David Midkiff for some encryption, however the code sometimes fails:

When encrypting a string a string of a specific length should be returned. however sometimes one of the characters of the encrypted string is a null character, and the returned encrypted string (with a embedded null character) is causing me problems. I want to check for the null character and if present redo the encryption. But how do I check for the presence of this null character in a unicode (double-byte) string?

Checking with Len(encrypted) gives the correct length (!) but trying to move each (unicode)character into an array fails when using the Mid() function past the null character in the string.

Now I can use

byteArray() = StrConv(unicodetext,vbFromUnicode)

to get the lower byte of each character into an array easily, but how do I do this for both bytes of the unicode characters?

Using an integer array does not work other than through

intArray(j) = CInt(AscW(Mid(Outp, j, 1)))

which fails on the nullstring in my encrypted text.

I have tried with variants but so far no luck. I thought if the string was entered into a variant then I could also address the variant as an array of bytes, but that does not seem to be accepted by VBA.

View 1 Replies View Related

Populate Multiple Array Variables With Same Code By Dynamically Changing Array Name

Sep 9, 2012

I am trying to populate many arrays with the same code using something like this. For this test, assume the following data in A1.

1
2
3
4
5

6
7
8
9
10

11
12
13
14
15

16
17
18
19
20

21
22
23
24
25

Code:
Sub populate()
Dim firstArr(5), secondArr(5), thirdArr(5), fourthArr(5), fifthArr(5) As Integer
Dim r, c, num As Integer

[Code]....

The above code does not work of course and falls over. I am unsure whether I should try and concatenate with something like this eg "" & arrName(i) = Cells (r,c) or go down a different route.

View 6 Replies View Related

Search Substring Of Array Matching List Of String From Another Array?

Dec 20, 2013

I need to export this to Xcelsius which doesn't support any macros/vba. Btw I can;'t use Row() in xcelsius too.

[Code].....

View 4 Replies View Related

String Array Values To Array Of User-Defined Types

Oct 2, 2008

I have a class module with several private variables, including one that is an array of a user-defined type. I am trying to set the values of a single element of this array with "Property Let ..." from a string array:

View 4 Replies View Related

Converting 3x10 Array To A 1X30 Array To Run A Match Formula

Apr 7, 2009

Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.

Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?

Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.

And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.

I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.

View 6 Replies View Related

VBA To Output From Array Based On Variable In One Element Of Array

May 2, 2013

I'm only starting to get to grips with arrays. I have what I consider to be a lot of data that I need to 'cut' into separate workbooks. I have written some code that does this by simply looping through each line, 250k+, checking against a variable and copying the row into a separate sheet. This took longer than it would have doing it manually. It was suggested to me that I use arrays to speed up the process. I have managed to store the test data into an array but am struggling to find a way to loop through and pull out an entire 'row' from the array based on a variable. I have looked for 2 days in various places to find some way to loop through the data held in the array, but to no avail.

That code will appear here from about 8am GMT tomorrow. I know that once I've cracked this I'm on the road to some very significant time saving and comprehensive report writing.

View 9 Replies View Related

Passing Array To OFFSET - Array Height Parameter

Aug 5, 2014

I want to pass an array to Offset in the "Height" parameter, without having to type the array.

{=MAX(SUBTOTAL(9,(OFFSET(A1,ROW(1:5),,{1,2,3,4,5}))))}

I can't seem to figure out how to build the {1,2,3,4,5}. I've tried another ROW(1:5) and have tried nesting that like N(ROW(1:5)) but nothing works.

How I can get the {1,2,3,4,5} without having to type it out (so that I can expand this to a larger list)??

View 8 Replies View Related

Filter An Array (the Longer One) Using The Shorter Array As The Criteria

Aug 26, 2009

I am trying to filter an array (the longer one) using the shorter array as the criteria. I am currently doing this using the following method

IF(LOOKUP(lookup cell, array)=lookupcell, lookupcell, "FALSE")

I then copy and paste 'values' and filter out the 'false' to get my final result.

This has worked in the past, but for some reason that I simply can't figure out, the formula isnt working! I've attached the example, and I've highlighted a number in blue (cell E522 and C103), (that should be being found in the 'LOOKUP' function) but is returning a "FALSE". I have looked over the code and simply can't figure out why Excel isn't returning the right value.

This is obviously happening for a quite a few of my numbers, as my filter result is returning an array that is about 1500 shorter than it should be. I have highlighted E522 as the 'example cell' to look at.

View 6 Replies View Related

Convert Boolean Array To Integer Array?

Jun 21, 2014

wondering is there a VBA equivalent of --() in excel that turns trues and falses to 1's and 0's?

View 14 Replies View Related

Index Match Array New Formula Not Array?

Nov 6, 2013

Is there anyway to recreate this formula w/o it being an array ?

{=IF(C3="","",IFERROR(INDEX('Master List'!$B$1:$B$2000,MATCH(TRUE,ISNUMBER(SEARCH('Master List'!$A$1:$A$2000,C3)),0)),"ADD TO MASTER"))}

View 5 Replies View Related

First Array Remain Same,second Array Always 11 Cell Added

Nov 15, 2007

=CORREL(C1:C10,C12:C21) at H1
=CORREL(C1:C10,C23:C32) at H2
=CORREL(C1:C10,C34:C43) at H3
etc

can i have a macro that first array remain the same, and second array always 11 cells added. drag it down also can

View 9 Replies View Related

Multiply Each Element In A 6x6 Array By A Similar 6x6 Array

Mar 22, 2007

I've tried to multiply each element in a 6x6 array by a similar 6x6 array, both on the same sheet, and it worked.(see Macro2 and attached xls file "Test").Then I got more ambitious and tried to do the multiplication from a standard array in sheet "TestA", with the result on the same sheet, by each array in sheet "TestB" and failed.How do I solve this problem? Pgualb PS:I'm using the R1C1 style.

Sub Macro2()
For y = 29 To 34
For x = 2 To 7
Cells(x, y) = Cells(x, y - 27) * Cells(x, y - 18)
Next x
Next y
End Sub
Sub Teste12()
'Multiplica matriz em TestB por matriz padrão em TestA com _
'resultado na matriz em TestA correspondente à matriz em TestB
'
Dim x, y As Integer
For y = 2 To 7.............

View 7 Replies View Related

IF (A1 Font = Bold, A1+A2)

Dec 2, 2008

how to create an if statement based on font properties.

I did a couple searches on "conditional formatting" but didn't find anything, and it seems like the only way would be through a macro, am i correct? I'd much rather be able to do this on a formula sheet if possible.

View 9 Replies View Related

Change Size Of Tab Font

May 7, 2009

Somehow my tab names (in 2003) have a very small font size. How do I return the size to normal?

View 5 Replies View Related

Inconsistent Font Size?

Jun 10, 2013

I have my Excel set up for a default font size of 12 point.

I often download CSV data to insert into spreadsheets. It opens in a new spreadsheet, and it's properly displayed in 12 point size. When i copy and paste it into the ultimate target spreadsheet (which is also set to 12 point size) the pasted data shows up as 10-point and I have to change the font size back to 12-point every time.

Why is this happening and how can I avoid that re-sizing that occurs?

View 3 Replies View Related

Delete Row If Font RGB Is Not 0, 0, 255 (Blue)

Apr 23, 2014

I'm using conditional formatting for column k that turns the cells blue (RGB 0, 0, 255) if the condition is met. I want to be able to delete all other cells where the condition is not met using a macro.

View 9 Replies View Related

Row Height And Font Sizes

Feb 21, 2014

I am building up a formatted invoice, line by line all of which is working well from the data point of view but no quite so well from the presentation point.

My text is all in Arial 12pt and I have the row height set to "Auto" and cell alignment to wrap text (at least one cell per row often has 3-4 lines of text so I need "text wrap" on)

My issue is that the printed output from a multi row invoice looks "crowded" and as this is the view the client gets to see (and hopefully pay ) the look is important. I tried to set the row heights to say .71cm but that causes the text wrap to stop working correctly.

I think I am trying to get some form of "inside top" and "inside bottom" adjustment / fill / padding (which is what I would do if I was using some form of documentation tool like Madcap Flare for example) but I cannot see how to do it in excel.

View 9 Replies View Related

Linking Font Size Changes

Jan 13, 2009

This probably sounds really weird, but does anyone know whether the size of the text in Cell A1 on Sheet 1 can be linked to the size of the text in Cell B2 on Sheet 2? Like, when I change the size of Cell A1's text, is there a way to have the size of Cell B2's text change as well?

View 8 Replies View Related

How To Change Font Of String

Oct 18, 2011

i have a string in a cell, that would say "Your results are -10% for the week". is there any way to change the font to red, for the number, including the minus sign preceeding it, and the percent sign following it. all are in one column, about a thousand rows. the rest can stay black.

View 5 Replies View Related

VBA For Conditional Formatting Of Font

Jun 21, 2013

I am looking to create a VBA that looks down a certain column and changes the font to red or green depending on the text in the cells in the column. If text = p then Green, If text = q then Red.This is the script I have (red only) how to incorporate the above criteria.Also the script in its current format comes up with an error.

Code:
Sub ConditionalFormat()
Sheets("Sheet1").Activate
Worksheets("Sheet1").Select

[Code].....

View 6 Replies View Related

VBA - Restore All Font Except Formatting?

Mar 19, 2014

I'm a beginner to VBA and I have a dataset with different loan rates for different schools. So far I can highlight rows based on their rate and order them from least to greatest.

What I want is to be able to restore all of the font to default (i.e. undo the highlighting) without changing the format of a specific column of cells (My G column, with the loan rates, goes from Percentage format to General format)

I'm using Selection.ClearFormats, which changes the format of the cells to general as well as it only restores the format of the cells I highlight, rather than the entire worksheet

So basically, how can I delete all formatting of all cells without changing the cell format (Percentage vs General)?

View 1 Replies View Related

Font For Button Form

Jan 4, 2007

Can I change font size & color for button form, normal practice for font is disabled when I select button

View 9 Replies View Related

Font Color Index

Apr 23, 2007

I have a spreadsheet which has some cells with blue font. If anyone tries to manually change the contents of these cells a worksheet change macro reads the colour index of the font and, if it is 5 (blue), uses "application.undo" to repair the damage.

When I use the sheet on another computer, the same font colur is being read as a four digit number, 4015 I think from memory, and the code doesn't work.

View 9 Replies View Related

Set Font Color In VBA Script

Jun 14, 2008

I have a script that sets font color. I think it uses something called "myColor" to define the color, and then pulls the color from a palette of 57 colors.

But how can use the "color" property instead, so I can have a broader range of colors? I can't tell how it would fit into my code. "MyColor" doesn't even show up in Excel's help file.

Here is the code. How can I adjust it so that I can use, like, "RGB 0, 0, 255" instead of color 32?

Or how would you code it so you could set color that way?

Private Sub WorkSheet_Change(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
If Target.Column < 8 Then Exit Sub
If Target.Column > 9 Then Exit Sub
Dim myColor As Variant
Select Case Target.Column...........

View 9 Replies View Related

How Do You Embed A Font Into An File

Jul 4, 2008

I have an Excel spreadsheet with Harvey's Balls font and need to get the file distributed amongst coworkers. Is there a way to embed the font into the spreadsheet so they don't have to install the font?

View 9 Replies View Related

CHANGE Font Color

Sep 15, 2008

try explaning this again....Also conditional formatting will not work...
Looking for a formula in excel to do this---
I have a lottery numbers system in the 3 digit and 4 digit
numbers...In row A we have the 3 digit that were drawn about
3000 ---3 digit numbers and in row C we have also 3000 numbers
for the 4 digit ....All we need to do is Highlight All the
even numbers and make them RED font---in the 3 and 4 digit rows...
Is there a way to do that?????
A--row-----C--row
123---------4429--make the 2red in the 3 digit row and 442red
in the 4 digit row.
033---------5579--nothing in this row
229---------2200---etc....

View 9 Replies View Related

Change Font In A MSGBOX

Dec 23, 2008

this forum have as to change the color of the Font in a MSGBOX?

View 9 Replies View Related

Drop-down Box Font Size

Mar 18, 2009

I currently have an Excel spreadsheet already created. I have added drop down lists using the Validation>Data feature and can get this to create the drop-down box, but the font is unreadable. If I create a new sheet and create the drop-down list it becomes readable. I can't figure out why the first is unreadable due to its small size. I eventually plan to add formulas to calculate how many yes's or no's in a column, but will address that later. I use Excel 2003.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved