I have a sheet which uses a 'Custom Format' in column A, '00000' to give each row a unique reference. Is there any way to do a 'Find' using this format, e.g. 00012, rather than just 12. Searching using '00012' doesn't find the appropriate cell, whereas using '12' does?
View 4 RepliesI have a column in excel which gets populated in the format "2/1/1980" when copied from a different source. I want a macro to run on this column and convert this in the below format. Required format: '02-01-80 (note the ' symbol before 02 which will keep it as text)
Existing ----> Required
2/1/1980 --> '02-01-80
2/1/1970 --> '02-01-70
2/1/1983 --> '02-01-83
I need this macro to run on two columns and replace them with the required format. I can do a find and replace either in the sheet or through hard coding the VBA, but as the date format keeps growing, I would need to do this via code and hence requesting the same.
I have a 9 digit number that I want to format as 999.9999.99 Can anyone tall me how? Does anyone know a good link with pointers on custom formats?
View 9 Replies View RelatedIf I have the following info:
A1 = 5
A2 = -4
A3 = 0
How can I use Format Cells > Custom to have them display as:
A1 = 5 up
A2 = 4 dn
A3 = Level
I've been trying and trying but keep getting a message that I should use one of Excel's pre-defined formats.
I'm working on a workshet where ppl fill in vehicle numbers, but they all find their own unique ways to fill them up. Some of the examples are below:
MH 04TN 2315
HR 38G 9605
9605G
H9425
TN04A8451
GJ04 GA5142
KA 0072
3,4,7 are incomplete nos. while 1,2,5,6 are all complete nos. I want the format of these above nos. to look like this:
2315TN/MH04
9605G/HR38
9605G
9425H
8451A/TN04
5142GA/GJ04
0072KA
Can this be done automatically in a worksheet using the custom cell format function??.... because then it wud get formatted as necessary whenever someone enters a vehicle no. in that particular column.
custom formatting a cell for accommodate a Canadian postal code. The postal code looks like this
v9s 2k5. 7 charactors l#l #l#. I would like to quickly enter the data and have excel capitalize the letters and add the space for me.
Looking for a custom number format which will show numbers as follows:
0 = -
1234.89 = 1,235
-1234.43 = (1,234)
How do you make custom date format to a cell in such a way that it appears e.g. "Jan-06"?
I tried custom format "Mmm-yy" but it still resulted to "jan-06".
I want the "J" here to be in the upper case.
I'm having trouble with the leading zeros of my ISBN#s; excel keeps chopping them off. I found a topic that discussed this issue, but it won't work for me.
http://www.mrexcel.com/board2/viewtopic.php?t=75303
I can't format them as text because I'm getting them as an isbn with dashes (ie:978-05689-256-7) and when I remove the dashes (even if its formatted as text) excel changes the number to 9780568.9E+12 (or something like that)
I think the solution would be to create a custom format (ie. 0000000000) to preserve the zeros, but I'm having 2 problems:
1. Since the ISBN#'s have 2 different formats (ISBN-10 & ISBN-13) I need to somehow check if the first 3 numbers are 978 then based on that it should be formatted either as ISBN-10 (0000000000) or ISBN-13 (0000000000000)
2. In the post that I linked to above it said that I won't be able to do a vlookup if its custom formatted. Is there any way around this?
This workbook has 23 sheets for which this format will apply.
Under 1 man-hour .###
Over 1 man-hour #.##
Over 10 man-hour ##.#
Over 100 man-hour ###
Over 1000 man-hour #,###
I have not learned the custom number format feature. If someone could give me the format for the cell to display:
4/23 Wed
I have a column in my sheet which I need to be displayed with dashes.
Excample: 123456 -> 12-235-6 (just an example)
But once in a while in the code is a letter like: 123A56 which obviously I need to be displayed like 12-3A5-6
But whatever I do, nothing seems to work.
Another cell with Left()-Mid()-Right() is no option for me....
Anyone know if a wildcard can be used in Custom Formatting using text leading off. Example:
U01234567
I have the above custom formatted as: "U"00-00-0000 which gives me U01-23-4567. This give me the format I need however; the U is not always constant and needs to be changed to different letters as required.
I have a custom format that is applied to column AU. Here is the worksheet code which is placed in the worksheet code area:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
If Target.Column <> 47 Then Exit Sub
If Target.Value = "" Then Exit Sub
On Error Goto Errhndl
Application.EnableEvents = False
Target.Value = "Map " & UCase(Left(Target.Value, 4)) & " <" & UCase(Mid(Target.Value, 5, 2)) & "-" & Right(Target.Value, 2) & ">"
Application.EnableEvents = True
Exit Sub
Errhndl:
Application.EnableEvents = True
End Sub
It works well on the sheet, if I remember to only put three numbers, three letters and then two more numbers (allwithout any spaces. Lowewr case ok). (eg. 122rmm25 is then transformed into Map 122R <MM-25>). On the sheet this works. Coming off of the UserForm, it tries to apply this format to text already formated and messes up royally!!!
Is there any way to either reverse this proccess coming off the UserForm or to stop the worksheet from appling this format to the value of the cell in question if the source is in the wrong format to be changed? How do I detect what format the text is in? (Raw, formatted correctly or over formatted)
I'm looking at what appears to be a custom chart. It is a box divided into 4 equal quadrants. In each quadrant is a percentage with the total equaling 100%. In each of the quadrants there is fill equal to the percent that is numerically written in that quadrant. I'll post a picture with this, but if I was talking cells then....
A1 = 15% B1 = 66%
A2 = 4% B2 = 15%
The backround image behind the number is filled up by volume equal to the percentage indicated. They are also color coded with red representing the highest percentage quadrant filled.
To top that, there are little arrows along the sides of each quadrant indicating an average score.
My first question is WHAT TYPE OF CHART IS THIS THING!, and second can this be done in excel?
I am trying to create a number format for formatting resistor value in their most commonly displayed form. For example 1,200 ohms would be displayed as 1.2kÙ and 5,000,000 ohms would be displayed as 5MÙ, and finally 5 ohms would be displayed as 5Ù. I have been able to create a format that formats any 2 contiguous formats but not all three.
for example: [>999999]###.0,,ÌÙ;[<1000000]###.0,kÙ;
or: [>999]###.0,kÙ;[<1000]###Ù
both work.(other similar criteria work as well) But if I try to put 3 conditions describing the desired formatting I get and error (containing no useful info) as I try to close the formatting dialog. Is there a limit to the number of conditions that can be used. Or something else I'm overlooking.
is it possible to custom format a cell in order to:
a) Present 3.33333 as 3.33 (max. of 2 decimal digits or less)
b) Present 3.333 as 3.33
c) Present 3.33 as 3.33
d) Present 3.3 as 3.3
e) Present 3 as 3 (NO zeros and NO decimal dot)
I want to create a custom format for a cell for entering in "cup measurements". I want to be able to type in 5, 1/4, 1/16, etc. and have the word "cups" appear after the number in that cell. I formatted the cell to say the word cups after typing in the numbers in my cell using the code "cups".
ex: 0 "cups" works fine for whole number
so then if i change it to 0/0 "cups" is works great for only 1/8 but not 1/16 or whole numbers. Then I looked at other custom codes that already existed in my formatts so I attempted to try this code which I just kinda came up with
_(0/00);_(0);_(0/0); "cups"
well it isn't doing what I want and If I use the 0/00 "cups code and I type in 4 cups the cell then says 4/01 cups.
What does my code need to be for me to show whole numbers and and size fraction without having it look weird?
Format custom number setting for this below ; with condition, when I type following ;
1------001/2014 (showing data)
8------008/2014 (showing data)
45-----045/2014 (showing data)
17-----017/2014 (showing data)
364----364/2014 (showing data)
etc....
I know this works because I have seen it in a workbook at a client's office.
I need a custon number format to substiture an "em" dash for zero. An em dash is a hyphen with the width a the letter m. There is also the so called en dash tht is the width the the letter n. A search of the internet shows that to create an em dash in a cell that contains a 0 ("zero"), hold down the alt key and type 0151 on the numeric keypad. Typing 0150 insert a en dash.
I want to be able to set this up as a custom number format in the custom number dialog.
Instead of using conditional format, I would like to use a custom format to hide the number 1. Is this possible?
Basically only three things can be in this cell =IF(D8"",IF(D8="CIV",1.077,1),"")
I need to mask the 1, otherwise show the 1.077. The reason I am not using conditional formatting is because there is a condition on the cell already which applies a pattern style and a font will not match up to the pattern.
I have to create about 100 sheets based off of a customer number in column a. The customer number in column a is something like 000000001905. I want the name of the sheet for that customer to be 019.05. Here is my code which is returning the sheet name as 01905.00
Code:
Sub createWorksheets()
nRow As Long
nRow = 7
Do Until nRow = 108
Sheets("Blank Customer Statement").Copy after:=Sheets("Table of Contents")
Sheets(2).Name = Format(Right(Sheets("Table of Contents").Range("A" & nRow).Value, 5), "000.00")
nRow = nRow + 1
Loop
End Sub
I'm using this custom format
Code:
_-£* #,##0.00_-;[Red]_-£* #,##0.00_-;_-£* "-"??_-;_-@_-
How do I modify it so that if the value is 0.00 then 0.00 is showed and not the current "-"?
I am trying to create a custom number format.
Here is what I have come up with: 0.00%;[Red]-0.00%
The problem is, it has no "," it would display as 23555555.6% or -2355555.6%
I need it to display as: 23,555,555.6% or -23,555,555.6%
How would this be written?
Additionally, I have occasion to "abbreviate" in the following format:
23.55MM% or 1.5M% or -23.55MM% or -1.5M%
For currency, I have it written in this manner:
Currency: [>=1000000] $#,##0.0,," MM";[>0] $#,##0.0," M";[Red]($#,###," M")
I just freeze when trying to convert to percentage.
I want to display 2 dates in one cell and have them custom formatted.
Eg. Display in one cell: 26 Jun - 27 Jun
With text typed: 26-6 - 27-6
(Or something along the lines of)
I know that dd mmm will display one date. But I cannot get 2 dates formatted. I tried dd mmm; dd mmm" - "dd mmm, which didn't work.
I am currently using this format to display numbers within a pivot table (this put's in a comma and removes any decimal place):
_(* #,##0_);[Red]_(* (#,##0);_(* "-"??_);_(@_)
Scenario1-If the cell evaluated is 0>1 the cell displays: 0 (a black 0)
Scenario2-If the cell evaluated is 01 are insignificant and I would like them to remain as a black - so as not to draw attention to them while evaluating data within the PT.
Does anyone know of a way to display a black - in all three scenarios above short of editing the original data?
I was hoping there was a way to do this via the custom format option or within the pivot table as the data that produces the PT should remain untouched.
I am looking for a custom number format for phone numbers that will allow extensions to be typed in. I am trued using the standard phone format [
View 12 Replies View RelatedI would like to set the format of a cell to the Japanese currency format. This means that the comma separator occurs at 4-digit interval instead of 3 (ten-thousand separator instead of thousand separator) like this:
1,000 -> 1000
10,000 -> 1,0000
1,000,000 ->100,0000
1,000,000,000 -> 10,0000,0000
and so on...
There are some rules with the decimals, but I will leave that out for now.
how to achieve this with either custom format or VBA, instead of initiating system changes?
I am trying to work out a custom number format to display betting fractions properly - namely 3/2 as 6/4 and 2/3 as 4/6. The following works for 3/2:
[=1.5]"6/4 " ;??/??
However I can't get anything to work for 2/3 as it is a recurring decimal.
i have the required date as part of a string, which i need to pull out and then format it as "yyyy-mm-dd hh:mm:ss" and put it in another file which will be saved as .csv
Here is the code i am trying to modify without much success so far
Sub dateFormat()
Dim dtMydate As Date
Dim sMydate As String
Dim strWhen As String
strWhen = "As on 13-MAR-2007 14:45:59 Hours IST" ' the starting string
'strWhen = Cells. Find("As on")
'take out the date portion from strWhen
strWhen = Mid(strWhen, InStr(strWhen, "-") - 2, (InStr(strWhen, "Hours") - 1) - (InStr(strWhen, "-") - 2))
dtMydate = CDate(strWhen)
Debug.Print dtMydate 'returned value is 13/03/2007 2:45:59 PM
dtMydate = Format(dtMydate, "yyyy-mm-dd hh:mm:ss")
Debug.Print dtMydate 'returned value is again 13/03/2007 2:45:59 PM...