i have some how messed up my sheet. I am generating a random number on sheet calculations that is then moved to sheet coach. From here i am moving the header from that clumn and putting the header on the sheet catcher in the box that corresponds with the number in the column from sheet on. What is happening know is i am getting #### in a lot of the columns.
View 6 Replies
I trying to write a conditional formula to test data in a cell to see where it falls between certain values, and depending on the data in the cell, will display a message in another cell showing what level has been attained. It's a long formula and I may not have the syntax correct. Can someone look at this and tell me where I have went wrong? All I get in the target cell is "################".
Here is the formula:
Try this formula. Array formulas will have curly brackets {} emcompassing the ENTIRE formula. You do not add these, you Enter the formula with Ctrl+Shift+Enter and Excel will add them (details: Array formulas). Many more Excel Formulas
=IF(c13<1600,"Not at prize level yet",IF(AND(c13>=1600,c13<=1999.99),"You have reached level 1",IF(AND(c13>1999.99,c13<=2499.99),"You have reached level 2",IF(AND(c13>2499.99,c13<=2999.99),You have reached level 3,IF(AND(c13>3000,c13<=3499.99),"You have reached level level 4",IF(c13>3500,"You have reached the top level!!"))))))
Excel vlookup function returns #VALUE when the lookup value exceeds 256
characters. I need a hash function to transform large strings into a value
that does not exceed the 256 character limit.
I have my columns set at a certain width, the cells set to Wrap Text, the Row set to Autofit YET sometimes when I add text, the hashmarks show up as if the cell isnt formatted correctly and Excel cant show all the text. I can resize the cell, change the text whatever, nothing changes. The only way I can fix this is to cut the text out, open a separate worksheet, paste the text into a cell and copy the whole cell BACK into the original spreadsheet, then I have to reformat the text, whereupon it behaves as it is supposed to.
I read about a similiar problem and the reply was that a macro might be causing the error. This is not the case here. This doesnt happen with any regularity so it is very difficult to figure out.
I have this code that reads below,What is the # used to refer to?
Redim qtf(1# To N)
Redim FVec(1# To M)
.....
If N <= 0# Or M < N Then
Info = -1#
.....
The following concatenate function was working, then mysteriously stopped. When working it returned the data that I requested, now if I click on any concatenated cell and hit enter I get the function string, see below.
='Input DATA'!C2&" "&'Input DATA'!B2&" "&'Input DATA'!F2
InputData is my tab that is being referenced. All other functions/formulas are working as designed. The data in the referenced cells is still there and I changed from text to number to general, etc but I still get the same result.
Normally, when we use the =MAX() function, figures / numbers will appear. Is there any formula that can show the row the highest data is in? Let's just say that the figure is 3080 and it is under 'Transportation' row. Generally, when I apply =MAX() fx, 3080 will appear. Is it possible for it to show Transportation by using formula instead?
View 4 Replies View RelatedIn the enclosed wb you will find 2 custom functions.
The IsRowHidden Checks weather row 3 is hidden and works fine.
However, IsColHidden does not change from False to True upon hiding col. C.
What did I do wrong !?
Is there a way to stop getting the error of a string of poind signd (which look like ################) whenever I'm trying to copy and paste information from another worksheet, or trying to link one sheet to another?
I've already tried resizing the rows and columns to their respective maximums but it doesn't seem to work.
I am looking to create a "Retractable Menu with the + and - signs". If you don't know what I mean, go to excel help and click on the contents tab - that is the menu system I am talking about.
View 2 Replies View RelatedI have created a macro that searches my drives for files, lists them in excel and turns them into hyperlinks. My problem is that a majority of the names use # signs in the file name. What is the best way of going around this problem without changing the file name complete. There is approximately 100,000 different files in different locations that would need to be alters so I think it would be easier to just make the name link work with the # sign.
View 1 Replies View RelatedI have this autosum macro it does its job very well. Problem is that it returns autosum with absolute cell references ($ signs around cell numbers). This way I cannot copy paste formula around same row but different columns. I would rather have to copy paste code for each column and change declarations.
How to edit this code so that variable cell references are returned in the result.
Code:
Dim cel1 As String, cel2 As String
cel1 = ActiveCell.Offset(-2, 0).End(xlUp).Address
cel2 = ActiveCell.Offset(-1).Address
ActiveCell.Value = "=sum(" & (cel1) & ":" & (cel2) & ")"
I need a macro that will change a number's sign. To go from neg. to pos. or pos to neg. I need this macro to execute this on all selected cells. So, for example, if I select A1:G35 and execute this macro via button or short cut, all those selected cells with numbers will flip signs.
View 9 Replies View RelatedCould anyone guide me how to express symbols & signs in VBA , LIKE ....
View 6 Replies View RelatedI need a macro or something else that could delete the dollar signs from all the formulas on my worksheet. in row 4, columns V-FR, each cell shows a value that is calculated by an underlying formula. the formula for each cell is different. is there a way to scan all the formulas and delete the $ signs??
View 2 Replies View RelatedI have a list of numbers in Column A that I always copy into another sheet. The problem I have is that some of these numbers end in "+" and I can't use them when it has that. I have to go through and one by one take out the plus. I was wondering if it was possible to copy only the numerical values to a new column?
Example
Original What Im Looking For
4 4
56 56
8+ 8
5 5
90 90
2 2
4+ 4
45 45
1 1
67 67
Auto Merged Post Until 24 Hrs Passes;Actually I just figured it out. I did a text to columns with a + sign as the separator and it worked.
I've got a column with numbers. some of the numbers have the following signs/symbols proceeding the value in the same cell: ',ft,#,ea,each. I want to have these removed by a formula so that the numerical values are alone.
View 3 Replies View RelatedWill it be possible to Count continuous occurrence of each signs 1-X-2 and arrange them in corresponding column From Q To AE as shown below in example table: 1
Draw result is shown in cells A2:N11 and result of Count continuous occurrence of each signs 1-X-2 is shown in cells Q2:AE11
For example we take a look row 7 where first sign-2 has occurred 3 times, as
Column Q is for to place result of sign1
And column R is for sign-X
So far count of sign-2, which is 3 times, must be paced in cell S7,
And then count of sign-1, which is 1 time, must be placed in cell T7,
And then count of sign-2, which is 5 times, must be placed in cell V7,
And finally count of sign-X, which is, also 5 times, must be placed in cell X7,
[code]....
How do i ask excel to select the largest number ignoring the sign?
A1 = 0.1
A2= 0.2
A3= -0.3
the one that i need is 0.3
Will it be possible to Count continuous occurrence of each signs 1-X-2 and arrange them in corresponding column From Q To AE as shown below in example table: 1
Draw result is shown in cells A2:N11 and result of Count continuous occurrence of each signs 1-X-2 is shown in cells Q2:AE11
For example we take a look row 7 where first sign-2 has occurred 3 times, as
Column Q is for to place result of sign1
And column R is for sign-X
So far count of sign-2, which is 3 times, must be paced in cell S7,
And then count of sign-1, which is 1 time, must be placed in cell T7,
And then count of sign-2, which is 5 times, must be placed in cell V7,
And finally count of sign-X, which is, also 5 times, must be placed in cell X7,
Example table: 1
ABCDEFGHIJKLMNOPQRSTUVWXYZAAABACAD1P1P2P3P4P5P6P7P8P9P10P11P12P13P14
1X21X21X21X21X221X21X21X21X21X
11111111111111
3111XX22X11111X
322
1
51
[code].....
Column H contains alphanumeric data (codes).
I need a macro that renames all cells in column H starting with the letter "B" by replacing B with "Temp" and thereafter cuts the last two digits of the code. B224501 would thus be Temp2245.
I'm creating an Excel sheet with statistics for a yearly salary review.
In the document that the managers will fill in there is a column for the employees performance (+, = or -).
I want to use this to compare how much salary raise employees has gotten depending on their performance rating. This is all fin with the + and - just using the regular countifs formula, but when it comes to the = Excel refuses to count them?
I have two columns with values of either 1 or -1. I'm trying to find a formula that I can write in one cell that counts the # of times column A and column B have opposite signs.
View 9 Replies View Relatedi want to divide eg. >53/>12 but i get #value! error. i have huge columns full of is so i dont wanna so 53/12 kinda thing 1000 times. whats the formula i need to use?
View 6 Replies View RelatedQUESTION: How do I check to see if a cell contains either "" or "/" and if it does then replace it with "-"? THE REASON: I have a form which needs to be saved in a particular directory with the name "Form 1 - client name - matter name". To do this I have put =("G:UsersCComplianceFile OpeningForm 1 - "&B7&" - "&D42) in Cell A1 and then in VBA added the following macro to a button which saves the file
ThisFile = Range("A1").Value
ActiveWorkbook.SaveAs Filename:=ThisFile
This works ok BUT, if the user puts "/" or "" in either B7 or D42, it won't save and throws up an error because you can't use those signs when saving a file.
So I am working with a model that calculates IRR, NPV, etc. I need to create a formula for conditional formatting that calls out if the IRR calculation is invalid due to non-normal cash flows. These are cash flows where signs change more than once (eg -100,200,-300).
View 2 Replies View Related
I have many excel wordlist, which are being converted from other file formats. Now there are sometimes useless spaces before entries in the cells. There are also some times commas and other not needed signs at the beginning of a cell in a column.
I need a macro, which removes spaces, symbols, letters, numbers or combination of them from the beginning of all cells in a column. The symbols should be chosen before the macro starts its work.
For example:
Before running the first macro:
Column A
,Word1
,,Word2
Word3
,Word4
After running the macro the beginning should be cleaned from chosen symbols, spaces or signes. (in our example if a cell begins with , then the commas should be deleted).
Column A
Word1
Word2
Word3
Word4
I need a macro, which removes spaces, symbols, letters, numbers or combination of them from the end of all cells in a column. The symbols should be chosen before the macro starts its work.
For example:
Before running the first macro:
Column A
Word1;;
Word2;
Word3
Word4;
After running the macro the end of the cells should be cleaned from chosen symbols, spaces or signes. (in our example if a cell ends with sign ";" then these signes should be deleted).
Column A
Word1
Word2
Word3
Word4
I am having an issue creating a formula that calculates % of Budget based on signs. What I mean is positive budget, negative actual and vice versa. Here are all the cases. Can someone please create a formula that I can copy down.
Actual Plan% Budget
85,60696,85188.4%
70-82185.9%
-1,530-3,786247%
-100100-200%
I've just seen a formula with two - (minus) signs right next to each other placed before a section in a formula while reading possible answers to my post. Here is the link: Understanding this formula. I've seen it before and am intrigued as to why it is there and what it actually does. Assume it is used such: = --(1+2). Would the answer then not be =--3 = 3?
View 4 Replies View Related
