Generate Lagged Dummy Variables

Mar 27, 2009

I need to generate a series of variables that model for events that occurred in previous days. If you look at the spreadsheet, you will see that on row 10, U01 = 1. This occurred on 1/13/2009. I need to generate the values for 1 Day Lag U01 - 15 Day Lag U01.

This means "1 Day Lag U01" = 1 for each row if in the row below it, U01 = 1. "2 Day Lag U01" = 1 for each row if 2 rows below it, U01 = 1. I manually entered in what this should look like in column AJ to AQ (it is only for 8 days though). how create a formula to do this. I need to do this lag model for all the binary var between C to AI on a 15 day period for 445 companies, so an explanation of how the formula works would be great.

If possible, can the formula end and restart for each company so row 1996 doesn't take on the value of row 1997, which is a different company. If this is too difficult, don't worry about it as I can just manually modify the last few rows of each company.

View 4 Replies


ADVERTISEMENT

Dummy Variables In Column

Nov 25, 2009

i have data on number of employees in culomn A range from 1 to 10000. i need to generat four dummy variables in column B,C,D and E as the following

s=1 if number of employees 1-50 and zero otherwise
m=1 if number of employees 51-100 and zero otherwise
l=1 if number of employees 101-1000 and zero otherwise
xl=1 if number of employees 1001-10000 and zero otherwise

View 2 Replies View Related

Code To Generate Data Table Based On Variables

Aug 26, 2008

I was trying to use the VBA code to generate a data table:

Private Sub createDataTable(WS As Worksheet, initialRow As Integer, numCol As Integer, numRows As Integer)
Dim initialCell As Range 'specify the upper left cell
Dim RefCell As Range 'the reference cell on the caculator sheet

'activate source sheet
ActiveWorkbook.Sheets("Calculator").Activate
Set RefCell = ActiveSheet.Cells(2, 3)
WS.Activate
Set initialCell = ActiveSheet.Cells(initialRow, 1)
initialCell.offset(numRows, numCol).Select
Selection.Table ColumnInput:=RefCell
'the calculation should be automatic, if not, then calculate
WS.Calculate
End Sub

and it kept giving me an input celll not valid error on this line: Selection.Table ColumnInput:=RefCell the thing is, I have defined RefCell as a range object, so it should be OK rite?

View 4 Replies View Related

Functions That Depend On More Than One Dummy Variable?

Feb 19, 2014

I'm trying to get the syntax correct, and not getting it right.

I need to calculate the Standard Deviation of values, but calc it based on more than one dummy variable.

EG: I need to Standard Deviation using data in column A, if the value in Column B (same row) is 1, and the value in Column C (again, same row) is 0. Right now, I have to reorder the data and calc it, then copy n paste values. I'd MUCH rather have a longer function so I don't have to reorder the data over and over again, and add and delete rows, etc.

I know it's a nested IF AND function, or I think it is, I just can't seem to get the syntax correct.

View 5 Replies View Related

Re-plicate A "dummy DAT" File

Mar 23, 2007

I have an old DOS program I once used extensively to manually enter numbers from a market report for a series of calculations. I already know the calculations and have re-created in excel anyway, but it has a graph which helps with viewing the end calculation/fluctuations, plus it has it's own database. It then saves that specific report to DAT file. ( it's own "database", the key lookup is date and alphanumeric code) It's this very DAT file I want to re-create from my imports I do now with Excel/VBA then re-open that same DOS program.


if this is possible to re-plicate a "dummy DAT" file, but instead the info. within that DAT file is filled from excel after a Web Query Imports rather than typing in the info.?

View 3 Replies View Related

Unzip Code - Works Without Variables, Breaks With Variables...

Feb 5, 2009

Unzip Code - Works without Variables, Breaks with Variables.... This has been driving me bananas...

I have the

View 2 Replies View Related

Function Back Variables: Function Give Two Or More Output Variables

Jul 27, 2006

Can a Function give two or more output variables. e.g.

Sub a()
x = 5
result = Y(x)
End Sub

Function Y (x As Integer) As Integer
Dim B
B = ... * x
Y = ... * B

this will give back Y as a result. But if I want to get 2 or more output variables (let's say I need to get also B into sub) from one function, how should I do that?
I need this because function works with large matrix and I want to extract some values appeared in between.

View 2 Replies View Related

Defining Variables Using Variables

Apr 27, 2006

I'm trying to loop through a range in excel from access, checking where the titles (in Excel row 1) match with the fields (in a recordset in Access that is passed to the function) - and where they do, I want to dimension a variable to hold the column number - I'm not sure it's possible, but I'd be interested to know either way. The line I'm asking about is at the bottom of the code - the rest of the code is just to give context...

Sub ImportGeneric(rsImported As ADODB.Recordset, rsConfirmed As ADODB.Recordset)
Dim fd As FileDialog
Dim xl As New Excel.Application
Dim wb As Excel.Workbook
Dim ws As Worksheet
Dim iFilePicked As Integer
Dim strFilePath As String
fd.Filters.clear
fd.Filters.Add "Excel files", "*.xls"
fd.ButtonName = "Select"
iFilePicked = fd.Show
If iFilePicked = -1 Then
strFilePath = fd.SelectedItems(1)
Else ..................

View 3 Replies View Related

Erase Variables All The Variables Or To Set The Value Of Them To "0"

Jan 16, 2007

i have a "problem" to empty / reset my variables. I defined them as vHour1_KW2 where the "1" is from 1 to 21 and the "2" starts from 1 to 53. Now I want to erase all of this variables or to set the value of them to "0".
At moment I use following

vHour1_KW1 = 0
vHour1_KW2 = 0
...
vHour1_KW53 = 0

vHour2_KW1 = 0
vHour2_KW2 = 0
...
vHour2_KW53 = 0

until...............................

View 3 Replies View Related

Generate A Listbox

Oct 3, 2008

I have a list of names on a worksheet in cells C9:C:C395. Their respected team numbers are located in G9:G395. What I'd like to know is it possible to put a team number in lets say cell K2 and have a listbox appear with the names of each of the team member from that team.

View 4 Replies View Related

Generate PDF With All Sheets?

Mar 12, 2014

I have a big Excel file with 20+ sheets. All these sheets have different margins and layouts.

I need to generate a Single PDF with all these sheets. Is it possible?

When I save the file as PDF, it converts only the current sheet and NOT the whole file. As I said all my sheets have different margins and layouts, I can not combine them into a single sheet.

View 2 Replies View Related

Generate New Document

Nov 12, 2008

I have an excel document that is a form.

Can I use the data collected from this form to generate another new document?

I want the user to enter some data and hit "Create" and a new excel document with that data is created.

Also, the new document has some data in it already. So it has some data and it will get new data from the form.

View 3 Replies View Related

How To Generate A Number?

Apr 27, 2009

here it is..

500 to 599>>>> equal t0 600
600 to 699>>>> equal to 700

the numbers from equals is the scale of the drawings which i use plot.

sample:

32039.98
31959.50 ...

View 9 Replies View Related

Generate Report With %

Jan 8, 2008

Analysis of Profit is very impt in business , that is why i keep trying to find way to use excel to generate profit report.

I have been trying to solve this for last one month. even when i bath... But no result.

May i ask any one here know how to convert my data to a report using . Below table said every thing.

Project (10)  HIJ1My Raw Data File  2BrandMonthProfit In %3Brand AJan 0730%4Brand BFeb 0750%5Brand AJan 0730%6Brand BFeb 0750%7   8   9I Need Report In New Work Sheet  10   11BrandJan 07Feb 0712Brand A30%30%13Brand B50%50% Excel tables to the web >> Excel Jeanie HTML 4

View 9 Replies View Related

Generate A Word Doc

Jun 9, 2009

I have a macro here that is not working becuase User-Defined Type not Defined. I think i understand it but i want to make sure and if there is any advice for the macro below even better.

what is in red below is what i think i need to identify as Type /end Type.

these are named cells from my data page.

Sub Makeworddoc()
' create a word doc
Dim wordapp As Object
Dim data As Range, message As String
Dim Notes As Integer, i As Integer
Dim Participant As sting, POC As String, phone As String, Email As String, Staff As String
Dim Contact As String, When As String

The rest of the macro is

' Collected information from worksheet
Set data = Sheets("data").Range("A13:G13")
Notes = Sheets("data").Range("notes")
' updated status bar
Application.StatusBar = "Creating Word Doc."
' assign current data to variables.............

View 9 Replies View Related

Generate Unique ID

Jun 17, 2006

on generating a unique ID for each row in a spreadsheet. My current manually entered ID numbers are alpha numeric, so I want to use a formula or macro to follow the same format.

For example the IDs may be ABC001, ABC002, AAA001, AAA002, AAA003. So user enters info in a form built in excel, and I run a macro which takes the data entered into that form and populates another spreadsheet and I assign an ID number.

The ID number should look for the next number in the sequence, based upon the first three characters.

View 4 Replies View Related

Generate All Possible Combinations

Dec 28, 2006

Is there an Excel Addin that will let me figure out the total number of combinations for any size number pool I specify (39,49, 53) and with any combination quantity I specify (3, 4, 5, 6)? And most important is that all these combinations be displayed in a column separated by commas.

Is a VBA script designed to handle something this complex.

View 9 Replies View Related

Generate A Chart With VBA

Feb 2, 2007

I am working in a Lotus notes application that enables me to add an Excel report and chart. I have no problem adding a report using their template creater. however it says for me to add a chart I have to create an excel template that must contain the vbscript needed to generate a chart.

I tried using the macro editor to create the report but i get an error "Microsoft Excel Select method of range failed".

View 3 Replies View Related

Vba Programming Generate List?

Nov 18, 2012

I am looking for a code to generate a combinations of x numbers taken 5 at the time. t

View 2 Replies View Related

Bar Charts Generate With Some Requirements

Jan 5, 2014

What is my requirements in the attached snapshot and excel file .

Please check the attachment. Charts.JPG

View 1 Replies View Related

How To Generate A Status Indicator

Apr 29, 2014

I have a sheet with work tasks on. Column I shows the completion date for each project. In column J I would like an automated response linked to todays date. Can we use row 2 as our example? So I need in this case cell J2 to show the following:

- If todays date is more than 5 days before the completion date (in cell I2) I would like the cell J2 to show "IN PROGRESS"

- If todays date is less than 5 days before the completion date (in cell I2) I would like the cell J2 to show "AT RISK"

View 4 Replies View Related

Generate Random Numbers?

Aug 19, 2014

I am creating an excel spread sheet for a project I am doing, I need to create a daily chart for 6 months of water usage that results in averaging set targets.

I have made a chart with the average uses per day but would like to have daily numbers that average out to what i have but in a random sequence e.g. i have that a shower uses 320 litres per day for 2 people is there a way i can make a chart that says: 300 (a1) 340(a2) 260(a3) 360(a4) etc i need to do this for 180 days with random numbers generated to average the same overall. I dont know even how to generate random numbers.

View 4 Replies View Related

Is Excel Can Generate Form

Mar 31, 2014

As you can see I have only one attached file which has a two sheet tab, one is the "DATALIST" and the other is "FORM" in which this tab will be the one to be generated with blank highlighted yellow, and get data from datalist tab.....

View 4 Replies View Related

Auto Generate Passwords

Nov 24, 2008

Is there a way to auto generate passwords? I would like the result to start off with the word "cook" and end in numbers. Is this possible?

Password: cook###

View 7 Replies View Related

Generate Random Numbers Between 0-9

Feb 1, 2009

I am trying to generate random numbers between 0 - 9 in ten cells that do not repeat an always include every value 0 - 9 (0, 1, 2, 3, 4,...9). The object is to have the numbers randomize each time. So cells A1:A10 could look like this:

3
9
4
5
1
0
6
8
7
2

Or, they could look like this:

9
7
5
2
8
4.................

View 4 Replies View Related

Macro To Generate New Quote

Mar 19, 2009

What I require is the macro code to achieve the following:-

Cells A2, B2 and C2 will be completed manually, however, when a new quotation is required the user must enter a new Control Reference Number in cell E2 and then press the Generate button.

Once pressed the Macro behind the button will generate the following :-

(a) Quote number underneath the last one in column 'A'

(b) Change Ref underneath the last one in column 'B' (this was the ref number input above in E2)

(c) today’s date underneath the last one in column 'C'

(d) a blank Quote Tab i.e. labelled the next number in the sequence i.e. Quote 2, Quote 3 etc which should be created copying the Template Tab

N.B. the total number of Quotes in any one work book should be a maximum of 30 so some form of checking would be required.

View 9 Replies View Related

Recognize Value And Generate Outputs

Jul 5, 2009

The issue: Theres about 300 rows of data arranged in multiple columns. One column has a dollar amount and another column has a code. Data gets entered into the sheet periodically so every new dollar amount needs to be transferred to another sheet by recognizing the right code.

What I want to do: I want excel to recognize the dollar amount and attribute it to the code in the same row. Then sum and transfer that amount to another sheet and if possible add it to an existing amount the in the correct cell.

The final outcome should be that any user of the document can just copy and paste data into one sheet and the document automatically generates the costs in another sheet. And if possible every dollar amount should be linked to a code so a user can just click on the amount and see where it came from and under what code it falls under.

View 5 Replies View Related

How To Generate Random Text

Sep 26, 2009

I was just wondering if there is a way to make rand or randbetween functions work with text. Alternatively, is there another function that will allow me to do this, without adding numbers in the parallel row.

I want the column, to randomly choose between "male" and "female". I do not want to add additional rows or columns preferably..

View 14 Replies View Related

Using Excel To Generate A Letter?

Apr 16, 2013

I'm using creating a spreadsheet where data inserted into Sheet 1, is used to fill the blanks in a letter in Sheet 2. The formatting is all fine and I've managed to get it working with the data coming through to the correct place.

However there is the issue that parts of the letter are not always applicable to all people. Is there a way I can create a formula that say hides a paragraph of the letter (or a row/cell to be more precise) if a certain value is 'true'? Would need to be done in a way that allows cells beneath the hidden ones to move upwards so there are no large gaps when printing the letter.

View 2 Replies View Related

Auto-Generate From Every 200th Row

Aug 30, 2013

I have a spreadsheet that has thousands of rows, but they only want every 200th row to be populated with said data values.

Is there a way that I can auto-generate those values separately?

In the one Attached, I don't have thousands of rows.

question.xlsx

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved