Get Next Date After Today()
Jun 18, 2009
In cell K25 I have a value where if it is greater than 49 I want the forumla to look at the values of Cells L3:L22 (these cells have a range of dates in them). I want the formula to go through these cells and pick the next date after today....If the value in Cell K25 is Less than or equal to 49 I want it to just return Todays date.
I found this post http://www.excelforum.com/excel-gene...ter-today.html which was basically what I was looking for, but for some reason when I put that into my formula it will return the smallest date, even if it is older than today.
So going back to my formula....Here is what I have currently in my cell:
=IF(K25>49,MIN(IF(L3:L22>TODAY(),L3:L22)),TODAY())
Like I mentioned above - this results with dates that are older than today - what can I do to make it return results that are only after todays date?
View 7 Replies
ADVERTISEMENT
Nov 19, 2009
I have data going in to a small table which has some empty rows as that data is not yet available... My problem is, I need to sort this table in date order but with the date nearest to today's date at the top...
The sort function puts oldest at the top or oldest at the bottom which is no good for what I need...
I use xl 2003.
View 9 Replies
View Related
May 29, 2014
I have a workbook that I'm using to tracking staffing patterns within a mental health agency. When the workbook opens the user is asked to pick a date range and an office location. I've placed code into the userform that pre-fills the "start date" with today's date and the "end date" 7 days from today's date. I would like the user to be able to enter a unique date range should they wish but I have yet to figure out the coding to accomplish my goal.
[Code] .....
Attached File : Staffing Report 1.90.xlsm
View 7 Replies
View Related
Apr 8, 2009
I am trying to get the results of the number of days between today and a future date. I am using ="cell containing futuredate"-today() and it gets me the correct number of days. The problem comes in when I have yet to populate the future dates. I am getting -39991 (numeric value between today and jan 01 01) and because I am also using conditional formatting this is even more of a problem. Is there a way get excel to display nothing if it is a negative number? or to give a specified resut if the number becomes negative such as Expired or something of that nature?
View 3 Replies
View Related
May 19, 2009
I need a formula that will calculate the number of days from a date entered into cell A1 to today's date. Whether it's before or after todays date. Example:
5/10/2009 to today is -9
5/22/2009 to today is 3
View 2 Replies
View Related
Mar 20, 2014
Trying to do a linkback from another post located here but not having much luck doing it: [URL]
I'm working with 2 date columns and trying to filter a view to only include projects with dates within 3 months of today's date.
I've attached a current working file of the data and the end result i'm hoping to achieve via a macro of some sort.
I've manually got it to work via formula by inserting 2 additional columns (highlighted yellow) which determine if the dates "YES" fall in this 3 month time frame of "" blank if not.
create a macro which does all of this automatically without modifying any columns if this is possible
View 5 Replies
View Related
Sep 18, 2008
I have a worksheet that has a sent date and expected delivery date I need create a macro that will alert me if today's date is within 5 days of expected delivery date.
View 14 Replies
View Related
Jun 12, 2014
Trying to automate the period part of the impt function
To calculate current value of loan i have the below formula below with the 3 being the current period
=IPMT(4.3%/12,3,5*12,-7000)/(4.3%/12)
What i would like to do is for the period to be self calcuating from current date and the loan start date. I can return a value in days using start date - today() and aware month function returns the month number but stuggling to find a way to work out cumulative month from the start date.
View 4 Replies
View Related
Jun 27, 2014
is it possible to display the week number of todays date (today()) from a physically entered start date (which would obviously be week one), the start date would be november 4th 2013.
View 3 Replies
View Related
Dec 31, 2013
On A3: D10 I have information on C1 a have date and E3:E10 I will input date
i.e. If the date entered in E3 is the same as or larger than the date on C1 then Blank the entire line A3: D3
View 3 Replies
View Related
Feb 7, 2013
If a1,a21,a41 have a value greater than 0, I wish to stamp cell b1,b21,b41 and so on with todays date, but without the stamped value changing/advancing tomorrow. At the moment cells b1,b21,b41 are copied down as follows. =if(a1>0,TODAY(),"") This works fine, but the date stamp of course changes tomorrow. I can not apply code to the whole b column as cells b2:b20, b22:40 etc have other non-date format data to which the code does not need to apply - the todays date value cell occurs every 20 cells.
View 6 Replies
View Related
Jan 17, 2013
Cell B1 contains a date, then B2 contains a formula that says:
=IF(A1>TODAY(),A1,A2)
A1 contains a green tick and A2 contains a red cross.
What I am trying to add is that if B1 contains no date then B2 needs to be blank.
I tried using =IF((A1="",0),(A1>TODAY(),A1,A2) to get it to show a 0 if there was no data but this doesn't work.
I am using Excel 2003.
View 4 Replies
View Related
Apr 16, 2014
I have a formula
=AL260-WEEKDAY(AL260,2)+MATCH(AP260,{"Monday","Tuesday","Wednesday","Thursday","Friday","Saturday","Sunday"},0)
The formula looks at the chosen start date (AL260), and then uses a displayed text day (AP20) to display the relvent date to the text day, this works fine however if the start date is say 08/08/14 (a Friday) when the formula detects a Monday (this copies down a range looking at the start date and the text days to produce dates on each line, the formula displays the Monday dates prior to start date, is there any way to alter this to make it display the dates ahead of the chosen start date?
View 10 Replies
View Related
Mar 20, 2014
I'm trying to filter 2 date columns to include only data containing dates within 3 months of today's date.
I see there is a data filter option for "next quarter" but not 100% sure if this covers the quarter from today's date?
View 3 Replies
View Related
Feb 25, 2009
how can you automatic the date to today's date when you open the excel file?
ie.
Price Report For 02/25/09
View 5 Replies
View Related
Mar 6, 2014
I am working on a spreadsheet to create a school 'tracking' system based on excel. What I need is that as soon as a box in column B is ticked, a date (TODAY() is entered in column A. That is not so difficult, and I have used the formula in cells in column A:
=IF(ISBLANK(Bx);"";TODAY()), where x is the specific row.
So, keep cell A clear untill something is written in cell B. This works fine.
But, for the purpose I need to keep the TODAY() date fixed after entry. And it need to be erased again if the tickbox in cell B is emptied again. It need then to re-enter a new date after cell B is re-used.
View 5 Replies
View Related
Mar 19, 2014
I am setting up some validation on my userform. In this case if a user enters a date within two weeks of todays date they will not be able to proceed onto the next page.
Example: Todays date is 19/03/14. If a user enters 25/03/14 into 'TxtDate' they will not be able to proceed.
[Code] ......
View 2 Replies
View Related
Dec 19, 2008
I'm trying to use the Function Today() in my macro to test if a date is earlier than today's date, and I get a compile error.
View 4 Replies
View Related
May 16, 2014
I'm trying to get a date picker to open with the current day's date, and am running into some trouble...
I added this line to the Initialize function:
Code:
Private Sub UserForm_Initialize()
DTPicker.Value = Date
End Sub
...and this to a button which opens the form:
Code:
Sub Open_frmPatientData()
frmPatientData.Show
frmPatientData.txtLastName.Value = ""
frmPatientData.txtFirstName.Value = ""
frmPatientData.txtID.Value = ""
frmPatientData.txtDay.Value = DTPicker1.Day
frmPatientData.txtMonth.Value = DTPicker1.Month
frmPatientData.txtYear.Value = DTPicker1.Year
End Sub
and I get a 'Run Time Error 424: Object Required' error on the line frmPatientData.show (in red). If I remove the line from the Initialize event, then everything works fine, but of course the current date isn't shown. What am I doing wrong?
View 1 Replies
View Related
Jun 6, 2014
I am trying to take the year from today's date then subtract away a date from a referenced date in a separate workbook. Then I want to put this result into an IF statement. For example if the result is between the number 1 and 4, display 1, if the result is between 5 and 9, display 2, etc. Right now, I'm simply trying to reference the separate workbook for the date and subtract that from today's date, but I'm stuck because I only get the date's serial number back.
View 1 Replies
View Related
Jan 8, 2009
how I can create a formula that would highlight the cell in a colour if the date was past todays date? This is what I'm doing - I have the expiry date of people's insurances. so e.g todays date is 8 th January, so if the insurance had expired 31.12.08, i would want the cell to be highlighted red. I think it may be an IF function but I cant remember.
View 3 Replies
View Related
Feb 3, 2009
Im trying to get the date filtered from a fixed date until Today(), but Im struggling to incorp it into the vba code....
View 9 Replies
View Related
May 12, 2009
I need to VBA code that will loop through the active sheet for all rows, column C2 through however many rows there are. Col C contains a date in the format: mm/dd/yyyy. I need the VBA to compare this date to today's date+30 days and if the date in C2, etc. is greater than today's date + 30 days, shade the row a particular background color (e.g., 3).
View 9 Replies
View Related
Sep 7, 2006
With the expiry date as currently set, the code should show the second message box but it shows the first instead.
Sub datechange()
Dim expiry As Date
Dim now As Date
'This line sets the expiry date as 1/5/2006
expiry = DateSerial(2006, 5, 1)
If now < expiry Then
MsgBox "Your subscription will expire in May 2007"
Else
MsgBox "Your subscription has expired"
End If
End Sub
View 4 Replies
View Related
Jan 23, 2008
How to check cell from a " DATE" column has todays date or not?
View 9 Replies
View Related
Jan 20, 2009
What I'm trying to accomplish:
In A1:
If a date in H2:H10 is greater than TODAY(), return the value of that date.
If TODAY() happens to be 1/20 and H2:H10 looks like this:
1/5/09
1/6/09
1/13/09
1/14/09
1/19/09
1/15/09
1/22/09
1/27/09
1/8/09
1/28/09
than A1 should have the value of 1/22/09
When TODAY() = 1/28/09, A1 should have no value, preferably no error either, but I can live with a NUM! or Value! or #N/A
Dates will not always be ascending. All cells in H2:H10 may not be filled. There may possibly be a duplicate, but the fact that there is a duplicate is not important to my result. (I'm looking for the 'next scheduled working day' whatever it is)
View 7 Replies
View Related
Feb 22, 2007
I am use the following formula =today()+1 to add date and what i would like to do is whne i save the work sheet under and new name is to have the date turn to a valve can this happen ...
View 9 Replies
View Related
Mar 31, 2009
this is my first post and i was a little unsure as to whether to put this in the General or VB/Macros forum, because it kind of involves both.
i'm trying to write a macro that inserts a formula that uses the date of the day that it was run (that is, i don't want it to be volatile like TODAY() and NOW(), but i don't want to have to manually type in the date into each formula).
is there a way that i can write a formula that uses the date of the day it is entered into the cell, or write a macro that adds today's date (perhaps using ActiveCell.Value = Date) and then writes a formula around that?
View 9 Replies
View Related
Aug 30, 2013
I have to figure out the date of 3 months ago from today. The rule is:
1) if today is the month end (e.g. 30/06/2013), then 3 months ago will also be the month end (e.g. 31/03/2013).
2) if today is not the month end (e.g. 10/06/2013), then 3 months ago will have the same day (e.g. 10/03/2013). But this has some exceptional case, because some month has 30th while other month does not. For example, if today is 30/05/2013, then 3 months ago will be in February which does not have 30th. In this case, just make it as the month end of 3 months ago.
View 5 Replies
View Related
Apr 21, 2014
In Excel VBA, is there a way to get the beginning date and the last date for the previous month from TODAY()?
i.e. If TODAY is Jan 3, 2014, then I would like to have the beginning date as Dec 1, 2013 and the end date as Dec 31, 2013.
i.e. If TODAY is Mar 18, 2012, then I would like to have the beginning date as Feb 1, 2012 and the end date as Feb 29, 2012 (yes 29, not 28).
So basically, I need to have the AI to know the beginning of the year (January 2014 - takes Dec 2013) and if it happens to be February, the 'end date' is either 28th or 29th depending on the year.
View 7 Replies
View Related
