The first goes through a directory and opens all the files.. after it opens a given file it goes off into a sub-routine to process the data in that file.
I am trying to create a counter in the first sub-routine and then pass that value into the second sub-routine to tell it to put the values out on the next row down.. so the first time through it puts the values out on row 1, next time it puts them out on row 2, etc.
If I want to set a global variable when I open my workbook which will be used in code on the individual spreadsheets, how would I do this? I want to set the time the workbook is opened to a variable (constant) and then compare that time to current time on each calculation in the worksheets.
I'm using Excel 2000.
I would like have a input box in which a user enter a number and then I would like to be able to use that number in other worksheets within the same workbook. How do I declare the variable for use with other sheets. I know I would first use
Dim intRows As Interger
But now how do I make it global.
explain the difference between declaring a variable as global or as public. Aren't they both available to the entire project including forms?
View 9 Replies View RelatedI have a worksheet that has 2 sheets. I want to declare a variable that can be accessed for reading and/or overwriting by both of those sheets. Where do I declare it and how do I access it from Sheet1 for example?
View 4 Replies View Relatedhow to set up a global varable over a workbook? Incognito439
View 5 Replies View RelatedI have a smattering of experience within various programming languages, but am still coming to terms with the basics of VBA. I am trying to declare a global variable, assign it a value, then use that global variable. Within 'ThisWorkbook' I have the following...
Public myText As String
Private Sub Workbook_Open()
myText = "Hi There"
End Sub
...and in the Microsoft Worksheet Object Sheet1 (Sheet1) I have...
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
MsgBox myText
End Sub
Now, my understanding of this code is that upon opening the workbook, myText variable will be declared, and then assigned the value "Hi There". Then, once I have clicked anywhere on Sheet1, a message box will appear stating "Hi There". Problem is, the message box is blank. This is all fine, except I want the message box to state "Hi There". What am I doing wrong? Is the variable declared (publically) correctly? Am I assigning the public variable the value correctly?
Am I referencing the public variable correctly in the Worksheet_SelectionChange procedure correctly?
I maked a userform who use global parameters (to let the user decide where write things) and later i need to use this parameter in a module (who is the main program). I try to resolve this problem put this global parameters like global parameters in the module and later in the both sides (in the module and in the useform), but it can't work. How i can resolve that?, i.e., How i can use a global parameter in a userform and the same global parameter in the modulo with the same data?
View 6 Replies View RelatedI am working on a workbook which uses a large number of variables. I am trying to keep them as "local" as possible to keep it simple. Some of my variables are local to the subs they're used in. Some are global as they're used by subs in several sheets. A third type of variable is used by several subs all belonging to the same sheet. Is there a way of declaring them so they're known by all subs in that sheet, but not by every sub in the workbook?
View 4 Replies View RelatedI have a UserForm that runs when my excel project starts that prompts the user for two pieces of data: a username and a password (these are not for logging into the file itself, I need to use them to call web queries later). I want the UserForm to store both of these data in global variables, so that macros that are run in the future can refer to them and read their values. Unfortunately, I am very new to VBA and I cannot figure out what code I need and where exactly I need to put it. Here is my current code, where "authentication" is the name of the UserForm object, and the textboxes I use for entry are named "user" and "pass": In "This Workbook"
View 4 Replies View Relatedhow to declare&initialize a variable as Global in vba?
I have a variable ,
listGroup=Array("aaa","bbb","ccc")
now i am using this variable for 3 different functions. so what i am doing is wrote the same code to 3 functions, so how i can declare&initialize this variable as global and access to all functions.
I need to declare a global variable in Application level not Module level.
I have declare a variable in Module1 and then Module2 with same name then complile it and get success. That means there has two variable with same name in different Module. I think this was not a proper global variable declaration by which I can allow to declare only one variable in all Module, Class every where. I have used code as below -
How can one change the cell values of a worksheet by creating a setup page in another worksheet. Example: the worksheet value is =average(E7, F7, G7, AQ7)*0.6 -- which this formula makes 60% of the average. On the setup page or worksheet I want o change value of *0.6 to say *0.5 for all the cell that has this value. In other words form the setup all the values will change on the related worksheet from the setup page.
View 5 Replies View RelatedI would like to ask the user if when the name the worksheet the same as an already existing spreadsheet tabe if they would like to overwrite it or unload the user form.
I am not sure of two things:
1. how to find the already existing tab?
2. Once I find out how do I programatically delete it, so the code can continue
The code below works with the exception of the last section (trying to achieve the questions stated above).
I am using Excel 2010.
Code:
Private Sub CommandButton1_Click()
If TextBox1.Value = blank Then 'Need name for processing
MsgBox ("Name must not be blank.")
Exit Sub
End If
If Len(TextBox1.Value) > 12 Then
[code]....
I am calling a sub that I want to do a SaveCopyAs using a variable as the file name but can't get it to work. The file name displays properly in a message box but when I do a SaveCopyAs it does nothing.
This code works:
I have code in a userform that shows another userform with a text box. When the user types text there and presses OK, I want that userform to close (which it does fine), and return back to the original userform (which it does fine), but I want the typed text to be stored in a variable that the code in the original userform can use.
I tried declaring a public variable, "Rresponse1", in each userform's procedure, but that doesn't work. I test for the content of the variable afterward in the original userform and it is empty.
In the original userform I have:
SaveList.Show '(this is the second userform)
MsgBox "This is response1: " & Response1 '(to test if the variable is being passed)
In the userform SaveList, in the Private Sub CommandButton1_Click() procedure, I have:
Response1 = SaveList.ListName.Text
Application.ScreenUpdating = True
MsgBox Response1 '(to test the variable, here it shows the text fine)
Unload SaveList
How do I get the Response1 variable to keep its content when control is passed back to the original userform?
I want to work on a range
range("A1:B100")
The number 100 (in B100) comes from another varibale M
Now how do I write the range so that I don't have to write 100. I want to pass on the variable in the range.
the code should look somewhat like
Range("A1:BM").
I don't know how to pass this variable M onto the range.
It is possible to define a variable in a MS Word macro and send it to an Excel spreadsheet?
View 9 Replies View RelatedI created the following sub to signal when a macro in Module 1 is complete:
Public Sub Done()
Dim complete As Boolean
complete = True
End Sub
I placed this just before the end sub in the macro for which I am trying to detect that it has finished executing:
Call Done
End Sub
In the Sheet 1 Module, the code fails at the statement:
If complete = True Then
The error returned is "Variable not defined." All three subs are declared as Public. Why does the Sheet1 sub not recognize the variable "complete" from the Module 1 macro?
I am trying to pass two variables RARD and CARD from Sheet1 'change selection' subroutine to the 'Set ARD Command button click' subroutine. The variable value remain empty and it gives me a 1004 error when I try to execute this line of code:
[Code] ....
What I am trying to do is put the text value 'ARD' in the cell on sheet1 which was the original cell I clicked on to open the userform2. To do this I click on the 'Set ARD' button on the userform2 which is then suppose to hide the userform2 and put the 'ARD' text in the selected cell on Sheet1.
I have attached the workbook for review : Therapy Tracker - Tester V2.10 - deleted logo.xlsm
is it possible to assign the formula to a variable ? here i am trying to get only the filename excluding the path and assign it to a string variable. but its not working check "strr1" line.
Sub TestReadDataFromWorkbook()
' fills data from a closed workbook in at the active cell
Dim tArray As Variant, r As Long, c As Long
Dim i As Integer
[Code]....
How do you pass a variable value in Visual Basic?
I have a variable called LastRow
LastRow = .Cells(.Rows.Count, "A").End(xlUp).Row
Would like to pass the value in my Do While loop
Option Explicit
Sub IncValue()
Dim MyCell As Range
Dim LastRow As Long
LastRow = .Cells(.Rows.Count, "A").End(xlUp).Row
Do While MyCell
I have a spreadsheet with about 30 charts on it that I would like to attach a macro to which opens the chart in a form. I've figured out how to do this last part, but am stuck on how to pass a variable to the form code which tells excel which chart to copy. Essentially what I'm doing creating a macro for each chart which would run when that chart is clicked on. This macro is identical for each chart except for the name of the chart being passed.
Sub Chart1_click()
ShowChart "Chart 1"
End Sub
Sub ShowChart(c As String)
frmChart.Show
End Sub
In the UserForm_Initialize code located in the userform module, I'd like to call the code which saves and loads the image of the clicked on chart. But here's where I'm stuck. How do I pass c to the code in the form module...e.g, how to pass c to UserForm_Intialize and to ChartZoom? Here's what I have so far...
Private Sub UserForm_Initialize(c As String)
ChartZoom c
End Sub
Private Sub ChartZoom(c As String)
frmChart.Show
Dim Cht As Chart
Set Cht = ActiveSheet.ChartObjects(c).chart
Dim CName As String
CName = ThisWorkbook.Path & "cht.gif"
Cht.Export Filename:=CName, FilterName:="GIF"
imgCht.PictureSizeMode = fmPictureSizeModeZoom
imgCht.Picture = LoadPicture(CName)
End Sub
Following statement works for me:
bdcTerm1 = ThisWorkbook. Sheets("ws2"). Range("A1").Value
But instead I want to parse through 50 rows and dynamically get the value instead of using a static Range("A1"). So I am trying to do the following:
For Row = 1 To bdc_rows
bdcTerm1 = ThisWorkbook.Sheets("ws2").Cell(Row, 1).Value
bdcTerm2 = ThisWorkbook.Sheets("ws2").Cell(Row, 2).Value
Next Row
But I get errror.
Have a file lets say is named
sample.xls
Does anyone know how to retrieve the name of the file in VB?
just the name and put it in a string?
I have a macro that when it runs presents a form that gives the user an option to skip the calculations or continue. If they click Skip then it continues the 'Next CE' . My problem is I can't get the Boolean value to pass from the form to the macro. Here is what I have
The main macro
Sub Dividend_MF()
For Each sh In ActiveWorkbook.Worksheets( Array("G&I", "Growth"))
For Each ce In sh. Range("a5:a" & sh.Range("a65536").End(xlUp).Row)
If Not IsEmpty(ce) And Not (IsError(ce.Offset(0, 56))) Then
If ce.Offset(0, 56) = "X" Then
I have a code below which need some input from user. This input will also be serve as the input of the subroutine which i am going to call. However, i do not know how to go assign this input to the subrountine which i will be calling, can anybody help ?
For example, the "input" variable will also be served as an input in subroutine test2 ...
I have a macro that nicely select the named range that the active cell is in. I want to chain on to that macro a macro that has a parameter a range with that active selection. I dont see how to "take" the active selection on the worksheet from within the macro and pass it to another. I assume I could change the cellInRange macro to return a range, however I dont yet see how to do that.
View 2 Replies View RelatedThis is the code after editing to make it more clear
Public Sub 1()
BookA= activeworkbook. name
BookB=Application.Workbooks.Add
Workbook(BookB).activate
End Sub
Public Sub 2()
BookB=Activeworkbook.name
With BookB. sheets(1)
.range("A1")=BookA.sheets(1).range("B1")
End Sub()
At the end of public sub 1, BookB is the active workbook. What I want to do in public sub 2 is to copy some data from BookA to BookB. Unfortunately, when moving from public sub 1 to public sub 2, BookA needs to be defined again. The code above is the code that I use in my add-ins. I figured out for non add-ins code I can define BookA with thisworkbook.name when BookB is active as I before work with BookA. This does not apply for add-ins as thisworkbook will refer to my add-ins code. Is there anyway of keeping definition of BookA is constant from one public sub to another public sub? This is simplified code. In fact, I can't merge public sub 2 with public sub 1 due to some reason which I don't say it here.
I have come up with the following formula to pull sums of data by month. I am using this because it is inconvenient to use the DSUM formula (I can't put all the criteria together in a simple way):
{=SUM(IF('Sheet1'!$B$2:$B$20="Person1",IF( DATE(YEAR('Sheet1'!$A$2:$A$20),MONTH('Sheet1'!$A$2:$A$20)+1,)=C2,'Sheet1'!$D$2:$D$20,0),0))}
I would like to, in a macro, assign a variable to this result - but cannot figure out the VBA code for it.