Hide And Unhide Columns Using Period Number?
Jan 10, 2012
I'm looking for a macro to hide and unhide columns..
Book1 is where I want my macro to sit with 1 cell showing the period number 1-12.
Book2 is where my data is dispalayed (I've got about 44 of these to update)
B4:M4 in book 2 (and all data sheets) has the period number in it.
I would like to be able to update the period in book1, run the macro, and end up with book 2 showing column A, the current period column, column N.
I'm fairly new to writting macro's and think I'll be able to addapt the formula to work for 44 sheets once I have it working for 1!
View 9 Replies
ADVERTISEMENT
Jul 17, 2007
If I have a value in A1 and run a macro [button], I want to have it hide a number of rows.
Each number is one column.
eg if A1 = 2 then B:C are visible, D:IV Hidden
if A1 = 3 then B:D are visible, E:IV Hidden
if A1 = 4 then B:E are visible, F:IV Hidden
up to 200 columns.
I tried it as a select case, but it is limited to just 22 cases which obviously not enough.
View 9 Replies
View Related
Jun 16, 2009
I've come across a spreadsheet where certain rows and columns (typically top rows or left columns) are hidden; however, there's no way to unhide them (the unhide function is grayed out) and it doesn't seem to be protected or no visible macros/vba on the file.
View 3 Replies
View Related
Dec 19, 2008
I have a spreadsheet that has 28 columns for time entries. Typically only the first 12 columns are used, so I would like to hide the remaining 16 columns (which makes the spreadsheet much more user-friendly). It would probably be nearly impossible to teach all of them how to Unhide the remaining columns (and re-Hide), plus I would like to use the full-screen function when employees enter thier times. I would like to use a form control in the column heading so that when the employees 'check' it, it will Unhide and then re-Hide the columns. Any way to do this? Seems like a VB thing to me (out of my league, but would be happy to add one in!).
View 2 Replies
View Related
Oct 23, 2002
I want to create two buttons.. one name HIDE and the other UNHIDE.
What I need hide button to do when i click it is hide the 4 columns to the right (not always going to be columns b:e)
For the unhide button unhide the 4 columns to the right (not always going to be columns b:e)
View 9 Replies
View Related
Mar 5, 2013
I once saw an excel sheet where I could hide or unhide a section by some + and - signes above the column-letters.... I have searched for this but I only get the ordinary hide/unhide solutions.
View 4 Replies
View Related
Sep 11, 2009
when i type 100 in the cell & press enter it automatically change to 1..and when i type 1000 i change to 10.
i have select B1 to B5 then hide it.then i click A1.how do it unhide it?
View 5 Replies
View Related
Jul 25, 2012
I'm looking to make a simple button that would hide a given range of columns.
This is the simplest I could find:
VB:
Sub button1()
Columns("AD:AE").EntireColumn.Hidden = Not Columns("AD:AE").EntireColumn.Hidden
End Sub
Although this works nicely, there was another way to do it (looks more ergonomic and doesn't take up spreadsheet space). Here's a screenshot of what I mean: ColumnHide.gif
View 2 Replies
View Related
Nov 21, 2008
I have a single button I want to use to call a macro to:
1.Hide columns C:AZ if they arent already hidden
2.Unhide columns C:AZ if they are already hidden.
View 2 Replies
View Related
Nov 27, 2012
I want to set up a macro that will hide and unhide columns.
View 9 Replies
View Related
Aug 5, 2013
The code below if I run once Hide the Range("H:FV,GG:IV") and shows the Range("A:G, FW:GF") And if I run it again Unhide the Range("H:FV,GG:IV") And Show all columns
Code:
Sub Hide_Unhide()Range("H:FV,GG:IV").Select
If Selection.EntireColumn.Hidden = True Then
Range("H:FV,GG:IV").EntireColumn.Hidden = False
Else
Range("H:FV,GG:IV").Select
If Selection.EntireColumn.Hidden = False Then
Range("H:FV,GG:IV").EntireColumn.Hidden = True
End If
End If
Range("A1").Select
End Sub
Above code is working with 2 cases now is it possible to add 3rd case Hide Or Unhide Range("H:GG,GI:HJ,HO:IV") in the same code, and shows the Range("A:G, GH, HK:HN")
Resume: my request
Step1-if I run macro First time it must Hide Range("H:FV,GG:IV") and shows the Range("A:G, FW:GF")
Step2-If I run macro Second time it must Hide Range("H:GG,GI:HJ,HO:IV") and shows the Range("A:G, GH, HK:HN")
Step3-if I run macro third time it must show all columns
And repeat same cycle all time Step 1 to 2, Step2 to 3 and Step3 to 1
View 2 Replies
View Related
Dec 1, 2013
I have a worksheet with a fair amount of data. It is split into two parts: the main part is a table with data in columns D to AR while the other part is simply a list with checkboxes against each item. I have set things up so that when a checkbox is ticked against an item in the list, then a 2 appears in row 2 above the relevant column in the main table; if the checkbox is unticked then a 2 appears above the relevant column.
What I seek is a macro that will hide all columns that do not have the associated item ticked; in other words, I want columns to be hidden if there is a 1 in the relevant cell in Row 2 (and visible if there is a 2 there).
I have used the following code (obtained from this forum), but it doesn't work as expected. When I select the items, the cells in Row 2 react as expected, but the hiding and unhiding only occurs when I go to another Worksheet and then return to the Worksheet where the data is. Obviously I want the macro to work immediately I tick or untick a checkbox. What is wrong with the code I have used?
Private Sub Worksheet_Activate()
Call HideCols
End SubSub
[Code]....
View 6 Replies
View Related
Sep 19, 2008
I'd like a macro that can hide/unhide certain columns. At the moment, the columns I want to hide/unhide are F, I, M, P, U and Y.
View 4 Replies
View Related
Nov 9, 2006
I have a range of columns ( J:AH) which i have to hide from the user interface.In order to unhide, the editor must enter a password. He/ She can only enter the password thrice. After 3 times, if it is still wrong, the whole workbook must be closed. Is this possible? If not, I'll settle for something less complicated.
View 9 Replies
View Related
Sep 3, 2007
I need hide/show some column by using Macro Button. I have attached the excel sheet( name VBA testing.xls). I need to hide column K,L,N,O & visible column G,H by clicking button "Plan A".Similarly i need to hide the column G,H,N,O & unhide the column K,L by clicking the button "Plant 2. Similarly by clicking the Button "Plant 3", hiding the column G,H,K,L are needed whereas column N,O will be unhide.
View 7 Replies
View Related
Dec 17, 2008
I have a speadsheet that has 27 columns for time entries, however employees seldom need to use more than the first 12 columns. I need to protect the sheet but would like the employees to be able to Unhide the columns when they need to use them, then reHide them. I can't find this as an option in either 2003 or 2007.
View 2 Replies
View Related
Feb 21, 2010
worksheet I am working on at the moment, basically if row 5 has a 0 displayed I want that column to hide, but if row 5 has text of any value displayed I want it to unhide, the range is E5 to BA5 across.
I have draft VBA code as follows:
View 9 Replies
View Related
Nov 28, 2012
Need a macro for each button.
The sheet will be protected with a password (in the future, users will have varied access privileges).
Column A is designated as the "Button" Column.
There are 5 buttons here. Each representing the area on the sheet that needs to be viewed. Once the button is pressed, it takes you to that section of the sheet. At this time, I have designated each column area as:
a-z
aa-az
ba-bz
ca-cz
da-dz
I have tried this formula with opening tabs, but this won't work.
View 5 Replies
View Related
Mar 4, 2013
I need to write a macro that will hide and unhide columns based on a cells value. I know how to write it to hide and unhide rows, but i can figure it out for columns.
For the rows I am using the following:
Sub HideRowsSavings()
Dim LR As Long, i As Long
Application.ScreenUpdating = False
With Sheets("Savings #4")
LR = .Range("A" & Rows.Count).End(xlUp).Row
[Code] ......
View 1 Replies
View Related
Jan 11, 2010
I am trying to hide or unhide columns E:BL depending if the the cell value in row 54 contains a value (Note cells in row 54 contain formulas). I have written the following code but get a runtime error on the else statement.
Sub UpdateCashflow()
Application. ScreenUpdating = False
ActiveSheet. Unprotect Password:="LD"
ActiveSheet.Select
Dim c As Integer
For c = 5 To 64
If Cells(54, c) = "" Then
ActiveSheet.Range(Cells(54, c)).EntireColumn.Hidden = True
Else
ActiveSheet.Range(Cells(54, c)).EntireColumn.Hidden = False
End If
Next c
ActiveSheet.Protect Password:="LD", DrawingObjects:=True, Contents:=True, Scenarios:=True
Application.EnableEvents = True
'
End Sub
View 4 Replies
View Related
Sep 4, 2007
I've attached one speadsheet :- "VBA.xls". The following conditions are to be done:-
1. When D2=1, Column "F","G" are visible & Column "I","J","L","M" are hidden.
2. When D2=2, Column "I","J" are visible & Column "F","G","L","M" are hidden.
3. When D2=3, Column "L","M" are visible & column "F","G","I","J" are hidden.
View 9 Replies
View Related
Feb 20, 2008
When my spreadsheet opens it automatically protects the sheets using the following
With Sheet1
.Protect Password:=SpreadsheetPassword, UserInterfaceOnly:=True
.EnableOutlining = True
End With
and I use the following to hide the column if the toggle button on my form is 'true'. The problem is it gives an error if the sheet is protected. it worksfine without protection.
If ToggleButton1.Value = True Then
Range("column_calories").EntireColumn.Hidden = True
Else
Range("column_calories").EntireColumn.Hidden = False
End If
View 7 Replies
View Related
Aug 14, 2008
I have a spreadsheet with a number of sheets two of which contain tables with many columns with a date heading, I would like a means for the user to select a range of dates and for the spreadsheet to automatically hide any columns that don't fall within this range.
View 3 Replies
View Related
Sep 15, 2004
I am trying to create an input sheet with a specified number of rows. My plan was to hide all the empty rows in the table and ask how many rows were required in the table. A button would then be pressed to unhide all the relevant rows thus giving a table of the correct size. My best effort so far looks something like this:
Sub UnhideRows()
Dim i As Integer
Dim myRow As Integer
myRow = Range("A1") + 2
Application. ScreenUpdating = False
For i = Selection.Rows.Count To 1 Step -1
If WorksheetFunction. Sum(Selection.Rows(i)) > myRow Then
Selection.Rows(i).EntireRow.Hidden = True
End If
Next i
Application.ScreenUpdating = True
End Sub
the cell to give the size of the table is A1 and the table starts in A3. The first cell in each row has an index number (=row() - 2), all other cells would be empty to begin with. My attempt did not work.
View 5 Replies
View Related
Jul 13, 2009
I am looking or a code, (Or formula if one exists) to hide or un-hide columns depending on what is entered into a cell. I have attached an example to help clarify what i mean. Basically i want:
If A2 is empty, hide columns C, D, E & F
If A2 = Apple, Unhide columns C & D, but keep E & F hidden
If A2 then becomes Banana, rehide C & D and unhide D&F
View 2 Replies
View Related
Dec 7, 2011
I want to hide and unhide columns based on a cell's value.
If D6 of the ‘Summary’ Worksheet Is <> to ‘Test1’ and <> ‘Test2’
THEN Hide columns D:K of the ‘Charts – Source Data’ Worksheet
OTHERWISE Unhide columns D:K
View 4 Replies
View Related
Jan 10, 2012
I'm trying to record a macro which will hide and unhide columns K:P of data, but I only want one button. I know how to do this to produce one button for hiding and another for unhiding...but I want one combined button.
How to use vba, how I do this via the macro recorder?
View 9 Replies
View Related
Dec 4, 2013
I am trying to hide/unhide columns based on what is return to cell C2 from this lookup (=VLOOKUP(B2,GM!E2:M129,9,FALSE)). It can only return 3,6 or 9
If it returns 3 I want to hide columns I:P
If it returns 12 I want to hide columns E:L
If it returns 6 I want to hide E:H and M:P
I have been trying to work with this code which I found on this forum but I haven't been able to get it working fully. It only works when C2 is entered rather than calculated and I can't get it working for the M:P part of the third option.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim Changed As Range
Set Changed = Range("C2")
If Not Intersect(Target, Changed) Is Nothing Then
Range("A:Z").EntireColumn.Hidden = False
[Code]...
View 1 Replies
View Related
Oct 24, 2006
Need the VBA script to hide/unhide specific columns within a worksheet.
View 9 Replies
View Related
Jul 30, 2007
I need to show hidden columns based on the date I entered. For example, if I entered "1/1/1990" on a1 as the starting date and "4/30/1990" on b1 as the ending date. I want Excel to show the columns that are covered by the date, thus it shows Jan, Feb, March and April. How do I do that? Here's an example attachment. In here Sheet 1 is the starting point, the highlighted cells is where I enter the date. the Result sheet shows what I want Excel to show me when I have a date entered.
View 8 Replies
View Related
