Hyperlink - Allow You To Quickly Navigate Through 60 Worksheets

Apr 10, 2009

I am using Excel 2003 to run a workbook that contains 60 separate worksheets. To make it easier for the techs to navigate the workbook I created a block of 60 autoshapes, (5 blocks high x 12 blocks long) each block hyperlinked to each worksheet and labeled with the worksheet name. I then placed one of these blocks at the top of every worksheet. A tech can click on the block and it takes him right to the page he is looking for, pretty straight forward. It works very well, but as you can guess this is a lot of autoshapes to be stuck in one workbook (3600) and whenever you make major changes to the workbook than the blocks become a factor, and if you resize the columns or add one, or change a worksheet name... I thought about just creating 60 custom buttons and sticking them on a custom tool bar - but I found trying to create a button with a number on it like "34" (for "worksheet 34") was pretty tough in the button editor.

way to create a set of hyperlink buttons that will allow you to quickly navigate through 60 worksheets?

View 9 Replies


ADVERTISEMENT

How To Map And Hyperlink 100 Worksheets

Dec 4, 2012

Suppose I have and excel workbook with 100 sheets and I want to click from one sheet to another. I created a table of all the sheets and hyperlinked the sheets then copy/pasted the table into each worksheet but that seems primitive. What if I have to revise the table? I will have to do it hundred times !

Is there a smart way to accomplish this using one smart master table that I can copy and paste into each sheet or somehting similar?

View 6 Replies View Related

Hyperlink Worksheets

Sep 6, 2009

i want to compile a list of volunteers with various interests in our organization and add a code letter to their contact information. with this code, i'd like to see the contact information copied into another worksheet automatically..is this possible? if so, how do you write the formula?

View 12 Replies View Related

Hyperlink To All Worksheets

Dec 11, 2007

I am wanting to create a macros that will for a given column of cells hyperlink to a Worksheet that has the same name of the cell. I.E. For the set of:

Ohio State
Nebraska
Oregon
Florida

I want to run a macros which will assign each of those to a worksheet within the same workbook that has the same name. So when "ohio state" is clicked on, it will go to the worksheet "ohio state." When "Nebraska" is clicked on it it will go to the worksheet "nebraska" ect.

View 6 Replies View Related

Hyperlink List Of All Worksheets

Apr 15, 2008

I have a workbook with multiple worksheets that will be added or removed. I want a list of all worksheets (which I plan on making hyperlinks) on the first worksheet. (entitled "Home"). This page is automatically selected on worksheet open. In pseudocode, I want a:

<for each worksheet in the workbook>
<list name of worksheet>
<advance one row>

OK - so that was even less than pseudocode, it's a quickie outline...
But the idea is present.

View 2 Replies View Related

Modify Macro To Add Hyperlink To Worksheets

Oct 4, 2012

I have this macro that I use for taking information based column B grouping it together and putting in a separate worksheet.

What I would like to do is in the master sheet (sheet1) to create a hyperlink for those listed in column B so I can click on it and it takes me right to that worksheet.

Sub exporttoWS()
Application.ScreenUpdating = False
Dim i As Range, LR As Long, ws As Worksheet, wb As Workbook, C As Range
Sheets("Sheet1").Select
Range("A1").Select
'looking at the full length of the file
LR = Range("A" & Rows.Count).End(xlUp).Row
'sheet needs to be named sheet1, all data should begin on row 3

[code].......

View 3 Replies View Related

How To Hyperlink Sheet In First Worksheet From Several Other Worksheets

Aug 24, 2013

I have workbook that contain several sheets. I want to generate a code that will do "first sheet as Index sheet (no mater what is the name of sheet)". Now in this sheet (Index), I want to put sheet names in sheet's order. OR I want to find the sheet name by just one click in Index sheet (eg. Ctr + F, sheet name, it will go to that sheet) can find all the names of sheet. I won't interested to hyperlink the sheet manually many times on Index sheet.

View 4 Replies View Related

Hyperlink To VLookup Result In Multiple Worksheets

Jan 31, 2014

I have a vlookup worksheet like described in this thread: [URL] .... This works perfect. I would like to be able to jump to the vlookup result using a hyperlink.

In the thread worksheet the formula in C2 is like
=VLOOKUP(A2,INDIRECT("'"&INDEX($G$2:$G$9,MATCH(TRUE,COUNTIF(INDIRECT("'"&$G$2:$G$9&"'!C2:C100"),A2)>0;0))&"'!C2:D100"),2,0)

In cell D2 I placed the formula (font: webdings )
=IF(C2="","",HYPERLINK("[Workbook1.xls]"&("Sheet2!"&(ADDRESS(MATCH(C2,Sheet2!$D:$D,),4))),"i"))

(Due to the Dutch Excel I use I replaced ";" to ",")

The link works because I hardcoded "Sheet2" into the formula where the result can be found. But it would be much nicer if I didn't had to put the sheetname into this formula.

Is it possible to use range G2:G8 like in the first formula to achieve this? I guess you have to use INDEX and/or INDIRECT but I barely understand the first formula ...

View 1 Replies View Related

Automatically Hyperlink Worksheets When Values Entered

Mar 6, 2014

I have an excel file that is used to record information about particular projects. We need to record dates related to these events and these are stored on separate worksheets. These use a key of sorts, where the unique references are replicated on all worksheets.

I have set up the data sheet to generate the unique identifier and the hyperlinks to the Received! and Sent! worksheets automatically as new unique references are added to the Data! worksheet.

What I would like is a VBA code to populate hyperlinks in the Received! and Sent! worksheets in column B, to link back to the Data! worksheet unique reference.

I had used formulas in the past, but the Data! worksheet is massive. I've needed to write hundreds of hyperlink formulas referencing blank spaces in the Data! sheet in anticipation of new projects. It would be better if they were populated as the sheet expanded.

View 5 Replies View Related

Hyperlink From A Shape To A Cell On Seperate Worksheets

Feb 10, 2010

I had getting a hyperlink from a Shape to a Cell on seperate worksheets and the macro works fine:

View 4 Replies View Related

Create Macro To Hyperlink Cells To Certain Worksheets?

Apr 4, 2014

I want the macro to:

1. Create a new worksheet when data is entered into a cell (ie. entered text "ACC2013" into cell A5)

2. Rename that worksheet to correspond to the data in the cell (ie. change worksheet name from sheet2 to "ACC2013")

3. Create a hyperlink between cell A5 and sheet2

I'd like for this macro to loop through a range of cells so I don't have to have a long code. Let's say my data range is from A5:A23. If this requires multiple macros that is fine.

View 1 Replies View Related

How To Quickly Display Given Cells Only

Jun 2, 2014

If I have a spreadsheet with 52 weeks or 365 days worth of data on it, is there a way (without using the hide function) to display dates of a certain range? For example, I only want to see the data from week 30 - week 40. Is there some kind of macro out there that I could maybe enter start date and end date in to a 2 cells (start date & finish date) and it will automatically filter it for me?

View 9 Replies View Related

How To Change Sheets Quickly

Mar 16, 2013

I am building an excel folder with 200+ work sheets in it. there is a master sheet which i collect the rest of the data for the other sheets. My problem is, is that i want to be able to change the sheets quickly on the master sheet when i copy and paste or drag down. The formula that i am using in the cell on the master sheet is =SUMIF(sheet18!$B$4:$B$30,"rd1",sheet18!$E$4:$E$30)

Is there a way to quickly change the sheet from 18 to 19 to 20 and so on, or do i have to go into each formula and change it manual??

View 6 Replies View Related

Deleting All Names Quickly?

Dec 1, 2011

Any quick way of deleting all named ranges within a given workbook? I can loop over them, but it takes forever. (I've got about 20,000 names in total).

Turning the normal things off doesn't do much good either (e.g. auto-calculating, events, etc)

View 2 Replies View Related

Quickly Go To Named Range

May 9, 2009

I have a single column with references on sheet 1, on sheet 2 I have a single named cell 'FormRef' which contents change (references). Active cell is in sheet one column A (column with references). If I use the FIND function dropdown and enter the '=FormRef ', Excel to quote "cannot find data".

Like a shortened version of vlookup I think. I want the active cell to go to the cell that has the contents of the single named cell in
sheet 2

View 3 Replies View Related

Navigate Through Sheets

Feb 16, 2009

i have an excel file with over 30 sheets on it. Contained in each sheet is a seperate pivot chart. i am looking for away to navigate around these sheets from the main screen. does anyone have any suggestions or opinions on the best way i can do this? here are my ideas but not sure which would work best

1. Create main sheet at the start and have hyperlinks to all sheets (by doing this how could i navigate back to home page?)

2. Create userform with drop down list of sheet names or search function to search for sheet names and then click on a button to go to sheet? dont know would i be able to do this? will the userform follow to the sheet with the pivot chart so i can select a different one from the same page? how could i hide the userform to view the chart and then bring it back to navigate to another?

View 9 Replies View Related

Create Duplicate Cells Quickly?

Jun 20, 2013

How do I duplicate the values to say 4 times in a column?

So I have in a column,

dog
cat
bird
fish

I want to duplicate the above to look like this below,

dog
dog
dog
dog
cat
cat
cat
cat
bird
bird
bird
bird
fish
fish
fish
fish

I'll need to do this for 500 unique values 12 times each, so is there a formula to do this easily?

View 5 Replies View Related

Quickly Formatting Cell - Different Labels

Feb 19, 2014

Is there a way to quickly format a cell so that it acts as though it is just a number and can still be used in a formula but also have a label? For instance I would like to be able to type in "10cm" and have the cell equal 10 and have it formatted to "General cm".

I realize that this is possible with the cell formatting menu, and can be applied to lots of cells at once, my question is can this be done somehow by just typing into the cell so that I can enter lots of cells that may have different labels without having to go into the cell format menu for each one.

View 3 Replies View Related

Using Array To Quickly Loop Through Data

Jul 5, 2014

I've built a simple inventory tracking system, and decided a reporting feature would be nice. There are four categories that are entered when inventory is removed...Date, Employee Name, Item Description, Location, and quantity.

Four my reporting purposes I'm only concerned with Date, Employee name and Item Description.

I've been able to write code that does what I want using a multiple Cases and a For loop once the case is identified. However, the more data there is the longer this takes...so I decided to stretch myself and try my hand at arrays (first time really working with arrays), but I'm having trouble figuring out exactly what I need to do.

Here is what I think the steps need to be.

1. Store my data (the categories above) which are located in the Check Out sheet
2. Go through the arrayed data to find exact matches based on my search criteria (here is where the Cases come in)
3. Pull out only that data and write the information to a "Report" Sheet
4. Export that sheet to PDF (this part I already have)

Below is a copy of what my current "working" code looks like (I should mention that the search selections are made from a userform this is what the Cases are deciphering between which ones are blank etc...), also most of my variables are instantiated as Public variables within a Public_Variables module also below.

[Code] ....

And the Public Variables...

[Code] ....

View 4 Replies View Related

Textbox Change Reacts Too Quickly?

Feb 1, 2013

When I type an 11 into my textbox (in my userform), I believe that the moment I type the first 1, the "event" kicks in. Is there anyway that I can have the change even "wait" until I am finished typing in all the digits of my number?

Code:
Private Sub TextBox1_Change()
Dim prime As Integer, divisor As Integer, currentcol As Integer
Dim faccount As Integer, currentresidue As Long, currentfactor As Long
Dim i As Integer, j As Integer
prime = TextBox1.Value
TextBox2.Value = prime - 1
'Write divisors across and phi of the divisors across at the bottom
Spreadsheet1.Range("c2").Value = 1

[code].....

View 9 Replies View Related

How To Clear A Range Of Formula Quickly

Jul 13, 2007

I want to clear the range A10:IV65536 or all the cells containning numbers under the row A10.

Right now it takes for ever to clear it mannually because excel recalculates everything... i have over 100 000 data and id like to find a way to delete them quickly.

Is there a way to clear a range without excel recalculating everything???

If not the best way i think would be to clear the last columns first all the way to the first columns.

View 9 Replies View Related

Button To Navigate Sheet

Apr 16, 2014

I'm looking to create a navigation sheet. Clicking different buttons will switch tabs and take you to the different parts of whichever sheet. Some sheets are several pages long so I thought this would be handy.

I tried using the hyperlink but it doesn't work as expected. It kind of randomly goes there. Ideally, I'd like the top of the page to be at the top of the screen.

View 8 Replies View Related

Navigate To My Documents Folder

Jul 30, 2008

Is there any code that can make it possible to navigate to my Documents Folder only that is on a network drive and open the folder but not a document.

View 9 Replies View Related

Navigate To Webpage Based On IF

Jun 6, 2009

If a1=True i want to navigate to a webpage how can this be done?

View 9 Replies View Related

Macro To Navigate Around A Worksheet

Jan 7, 2010

I needed to create even the simplest of VB Code and i'm struggling to get a macro to navigate around a worksheet.

Here's what I have so far...

Sub Macro2()
Selection.End(xlDown).Select
Selection.End(xlDown).Select
Selection.End(xlDown).Select
Selection.End(xlDown).Select
Selection.ClearContents
Selection.End(xlToRight).Select
Selection.Cut
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
(At this point, I want the cell 2 above the last selected to be highlighted)
ActiveSheet.Paste
End Sub

View 9 Replies View Related

Macro To Navigate Through Spreadsheet

May 21, 2006

when the user selects any cell(s), then hits the command button, I want the code to move the cell(s) selection to the far left i.e. Column "A". I've managed this is a roundabout way, but I'm trying to make a far more elegant version.

Set C = Selection
With C
While Not C.Previous Is Nothing
MsgBox C
Set C = C.Previous
Wend
End With

So C is the selection made my the user, for this example they are just selecting one cell. The MsgBox proves to me the code to moving the cell selection to the left, but the While condition falls as the Previous test condition fails and bombs the macro. I cannot think of another way of doing this. Is there a method that returns X and Y co-ordinates as numbers?

View 2 Replies View Related

Debugging The Type 13 Mismatch Error Quickly

Apr 29, 2009

What is the quickest/best way to find out exactly what is causing a Type 13 Mismatch error?

Debugging with F8 is taking forever as I have to go through loops that go through 6000+ rows each...

View 10 Replies View Related

Returning Entire Row From Opposite Sheet Quickly

Feb 21, 2014

I have formula that looks for information from another sheet (sheet name "ValidationLists")in Column A (list "billto") and returns all the occurances in my current worksheet (including the 10 columns next in the array). What it looks for is based on whatever value is currenty in Cell A2.

Example of formula is as follows:

{=IF(ISERROR(INDEX(ValidationLists!$A$2:$J$300,SMALL(IF(billto=$A$2,ROW(billto)),
ROW(1:1))-1,1)),"",INDEX(ValidationLists!$A$2:$J$300,SMALL(IF(billto=$A$2,
ROW(billto)),ROW(1:1))-1,1))}

Basically I want to return everything that matches cell A2 of my current sheet from sheet list "billto" in a different sheet but I need the adjacent cells as well. So one cell below this would read the following (Just the Row Changes):

{=IF(ISERROR(INDEX(ValidationLists!$A$2:$J$300,SMALL(IF(billto=$A$2,
ROW(billto)),ROW(2:2))-1,1)),"",INDEX(ValidationLists!$A$2:$J$300,SMALL(IF(billto=$A$2,
ROW(billto)),ROW(2:2))-1,1))}

And the column B next to the original formula reads the following (just returning one more column from the array):

{=IF(ISERROR(INDEX(ValidationLists!$A$2:$J$300,SMALL(IF(billto=$A$2,ROW(billto)),
ROW(1:1))-1,2)),"",INDEX(ValidationLists!$A$2:$J$300,SMALL(IF(billto=$A$2,
ROW(billto)),ROW(1:1))-1,2))}

It is working exactly how I want it to. The problem is it is taking 2-3 minutes. I can just get a list of rows with the value in A2 from List "billto" very quickly but then how do I get the entire row to appear in my current sheet quickly?

View 2 Replies View Related

Quickly Select Cells In Alternating Rows

Jul 21, 2009

I am interested in selecting cells in alternating rows as follows:

12 Red Happy
00 Unique descriptor
13 Grn Sad
03 Unique descriptor
14 Yel Happy
02 Unique descriptor

I am interested in selecting all the "12, 13, etc", "Red, Grn, ..." and "Happy, Sad..." for analysis, but want to skip all the rows containing the 0- numbers and the descriptors for them. How do I quickly select only the alternating cells in a column within a selection?

View 9 Replies View Related

Auto URL Navigate In Excel Web Browser Through VBA

May 21, 2014

I have 1000 urls to view everyday and identify type of website. Everyday i have to copy that url from excel and paste in browser which consume lot lot time for me. Is it possible to create vba in excel so when i select or move on that url cell (not to click on any click button) url get open in excel only.

This will reduce my work 80%.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved