Join an array with Text elements to create a string that can be Evaluated
So for instance if I have Array("A", "B", "C") and I want to evaluate("=({" & Join(array, ",") & "})="A)"). Is there any way to do this without having to loop or push to a Named array first? I'll even take this evaluate thing if I can do it with text and numbers
For i = LBound(arrXl) To UBound(arrXl) MsgBox (LBound(arrXl)) 'If 1st char is different from 3rd char then remove all of string after 1st char
If Left(arrXl(i), 1) <> Mid(arrXl(i), 3, 1) Then arrXl(i) = Left(arrXl(i), 1) End If 'If 1st char is different from 7th char then delete string after 5th char If Left(arrXl(i), 1) <> Mid(arrXl(i), 7, 1) Then arrXl(i) = Left(arrXl(i), 5) End If
The lbound function returns the value of 1 as the lower bound, I do not have "Option base 1" set so I was expecting the lbound value to be 0. The first 2 cells in the F column are blank so this may have something to do with it, I am unsure if cells in excel can be null if they can be null one cell may be null and the other may be a zero length string but I am unsure about this.
The ubound function returns a value of 487.
The code breaks when I try to access an element in the array so it breaks on the line:
If Left(arrXl(i), 1) <> Mid(arrXl(i), 3, 1) Then
and returns the "Subscript out of range" error message.
If I have say several hundred elements stored in an indexed array and I want to clear them each time the sub or function holding them is called, is there a way to erase the contents of the entire array without having to loop through each element. Something like array().clear? Note that each time the sub is called, they are also redimed to some reference.
I have a STRING array which is dimensioned with 100 elements possible. What i want to know is how to determine the "length" (not sure if this is the right word) of the array. For example: Suppose i have 10 strings in the array. Is there a command to determine that there are only 10 elements in the 100 possilble array?
I can't seem to get my head around the simple issue of assigning a range of cell data to an array! Here is a snippet of what I have, maybe you can see the flaw:
I have a question regarding arrays. If I have too many elements in a 1D array(let's say 1000), how can I list all of them in a msg box (separated by comma)?
I am facing the some issue while tried to display the data from array. Below is code I have to tried to display the data from array.
Scenario: I have assigned the few values in my excel to an array and tried to display the data stored in array
Sub Main() Dim Rows_Array() As Variant Dim i As Integer, Sheets("EmployeeWise").Select Rows_Array = Range("C6:C" & Range("C65536").End(xlUp).Row).Value For i = 1 To UBound(Rows_Array()) MsgBox Rows_Array(i) Next End Sub
I am trying to present a 10X10 Matrix Range (A1:J10) full with UNIQUE INTEGER random numbers. I thought to use an Single Dimension Array (100 deep) and fill it with the Rnd() Function.
Then, I thought to check the RANK of each element of that Array and transfer it to 100 cells (10X10) in the Sheet (assume A21:J30) with the help of 2 nested loops.
My problem is: How to find the Rank of each element within ARRAY1. Is there a way to refer to an Array as to a Range in a Worksheet. (I do not want to transfer 100 values from the Array to the Sheet - I rather prefer to check the Rank WITHIN(!) the Array).
Option Base 1
Sub MiKe() Set AWF = Application.WorksheetFunction H = 10 V = 10 Redim Array1(H * V) For CL = 1 To H * V Array1(CL) = Rnd() Next For HC = 1 To H For VC = 1 To V.........................
I've defined a string array and would want to use it as a basis for a vlookup. Is it possible to find the elements of the array directly in the worksheet ?So far I've got :
In the first loop that executes this command TAG_RANGE gets set to $A$1:$A$39
I want to loop through the values in that range and run tests against them. Is there a function that will take the values in the address range an convert them into an array so that I can use something like this:
Code: For Counter = LBound(TAG_RANGE_ARRAY) To UBound(TAG_RANGE_ARRAY)
[run tests]
Next
Or is there someother direct way to do this other than creating a loop that fills the array element by element
I'm trying to write a macro which will find members of an array on a sheet, highlight the column and then change the format of the column, what I have at the moment is:
I have a cell that contains parts that are comma separated. I want to assign each of these parts to an element in an array so I can process them using a loop function.
How can I count the number of elements of a particular dimension of an array variable that have actually been filled with items/values?
For example, the array variable in this procedure has two dimensions. Dimension 1 has three elements, and dimension 2 has 5 elements. I then add values to some, but not all the defined elements of dimensions. How can I count, for each dimension, the number of elements that have values rather than are empty?
I have an array of data type Variant, who's elements are workbooks opened by a user.
The array size is static, which for now isn't a concern but I can't work out how to close the workbooks in the array via a loop and the usual vba code of Workbooks("file").Close
Code I have that doesn't work is:
Sub Close_Workbooks_In_An_Array ()
Dim dFile (1 to 6) As Variant Dim i As Integer, j As Integer
' // Some code to open files, set each dFile(i) as a file and then process ' // them. Max value for i is 6
j = 1 For j = 1 To i MsgBox ("Closing: " & vbNewLine & vbNewLine & dFile(j)) Workbook.(dFile(j)).Close Next j
I am trying to compare the values in an array with the values in a range of cells. It worked fine until I moved the code into a sub. The specific problem that I am having is that is pulling cell values from "shippablegoodspriorday" and it is supposed to be pulling the cell values from "shippablegoods".
I am trying to figure out a method for calling the ith number in an array that was defined in another function. The mean function is working and the result is (1 x variables) array. Then, I want to use that array in the sdev function. I am having trouble pulling the ith number from the mean function. Also, is there a way to make variables constant so that they do not need to be declared for every function.
Sub stats() periods = Range("periods") variables = Range("variables") Redim X(periods, variables) As Double Redim uX(variables) As Double Redim sdX(variables) As Double 'Load Data For i = 1 To variables For t = 1 To periods X(t, i) = Cells(4 + t, 2 + i) Next Next 'Calculate Mean (run 'mean' function') uX() = mean(X)................................
I am trying to pass a string array into a form. I have added a member string array to the form, and a property to "Let" the array in the the member array.
Private sFormString() As String
Property Let FormString(value() As String) sFormString = value End Property
I can pass a string in using a procedure:
Sub StringArrayTest1()
Dim TestString() As String Dim frmString As FString
but I cannot "modulate" the code, or else I get an internal error (error 51). I.e. this code doesn't work:
Sub StringArrayTest2Mod(TestString() As String, frmString As FString)
frmString.FormString = TestString
End Sub
Sub StringArrayTest2()
Dim TestString() As String Dim frmString As FString
Set frmString = New FString Redim TestString(1 To 2) TestString(1) = "Cat" TestString(2) = "Dog"
Call StringArrayTest2Mod(TestString, frmString)
End Sub
Does anyone know why this happens? Obviously, in the example code its not an issue, but the application I'm using this for is more complex, and some modulation here would be good.
which i am using to map columns between spreadsheets. The basic numeric entries refer to columns to copy. But I want to make the routine smarter with the strings.
If array(x) = 12 (For example) Then Do something End If If left(array(x),1) = "=" Then Do something Else End If If array(x) Is String literal (e.g "xyz" Or "123") Then Do a third thing End If
i cant find a typeof or isstring kind of function. Isnumeric works ok for some values but quoted numbers (eg "123") return true (which isnt what i want). I have tried the left(string,1) = """ but excel seems to hide the quotes.
the built in "Join" function can join all elements of a 1-dimensional array into a string with delimiter. Now, how do I do that with multi-dimensional array if I just want to join 1 dimension of it.
For instance, I have:
m = 10 n = 20 Redim my(m, n) 'assign values to array here...
'I want to join, say, my(5, 0 to n) only 'How to do that without declaring a new 1 dimension array?
Also, I want to write a join sub/function to do the above for n-dimensional array, do I need to write each one for every number of dimension (1 sub for 2-dimension, 1 sub for 3 dimension, etc.)?
I am trying to use the ARRAY.JOIN function as recommended by Domenic in previous posts. I need to output a single column of values from a 10 x 10 grid that does not have values in every cell.
(I would also like to eliminate any blank cells from the final column.)
I can only get ARRAY.JOIN to output the first value of whatever range I select, not a column of values.
I am trying to use the ARRAY.JOIN function as recommended by Domenic in previous posts. I need to output a single column of all the values from a 10 x 10 array that does not have values in every cell. (I would also like to eliminate any blank cells from the final column.) I can only get ARRAY.JOIN to output the first value of whatever range I select, not a column of values.
how to properly execute that function. One earlier comment was that I was not specifying criteria. I'm not sure from the description and help section of "morefunc" as to what those criteria specs are, other than specifying the whole array. I am attaching a test file with the 10x10 grid & some missing values in A1:J10. Cell L1 has the ARRAY.JOIN function with the entire grid specified, but the output is only the first cell of the grid.
I'm trying to populate a ComboBox or ListBox with elements parsed from a html code I've already parsed from a webpage. Explaining: I was able to extract from the webpage code the part that contains the information I want, which is:
Now I want to make a ComboBox containing every university as a different option and, if possible, to assign them the corresponding values shown in the code.
Column A2:A100 contains part description various len lengths max is 50 min is 22.
Column B2:B100 contains scrap qtys.
In column C2:C100 in need to join the text in A and B.
i want the scrap qty's all to be alligned i.e level, as column C is shown in a userformlist box.
meaning joining text/values would look like this (ignore full stops) dispenser calsberg .........70 tap beer......................... 80 cowl................................100
instead of dispenser calsberg 70 tap beer 80 cowl 100
I am trying to change the value in a cell by referenceing it to another sheet. My cell is: Today it is 33F, have a nice day. Now, 33F should be called from another cell and should be inserted in this new cell. If I change the 33F in the other cell this change should be reflected in my text file.