A2 cell data = 11 digits alpha-numeric number.
* begin with either "0" or "1"
I want to the formula to look at the 6th and 6th digit (numeric, alpha-numeric, or Alpha) and compare it with the cells under "'PSCCR Queue - Manager" TAB from C4 thru C7.
Below formula is only looking at the first value when comparing.
=IF(A2="","",IF(ISNUMBER(MATCH(MID(A2,6,2),'PSCCR Queue - Manager'!$C$4:$C$7,0)),"ITS","Non ITS"))
I am trying to create a shift roster for my team. My team work in general shift (GS), second shift (SS), third shift (TS). There are situations where some team members come in any of these shift but had to leave midway due to feeling well, so that should be counted as half day. This half day scenario may be in any case GS/SS/TS. I am using COUNTIF to get the sum of GS/SS/TS for each employee which is giving a whole number. I also want to incorporate 3 different variations of half day as Half Day GS (HG), Half Day SS (HS), Half Day TS (HT). My expectation is that for each Half Day only 0.5 should be added in a appropriate shift, but COUNTIF is always counting this as 1. How I can achieve this using countif or any other Excel function? Sample sheet is attached.
View 3 Replies View RelatedI had an "If" formula that would grab my numeric data from one cell and dump it into the corresponding cell depending on my letter code. I had to change my code vales from apha to numeric. I enclosed the attached spreadsheet and highlighted the cells in yellow that are in my formula that don't work any longer. I was hoping someone may have a solution.
View 5 Replies View RelatedI have a column that has cells with values as
19352510
C084111X AA
24253081
A001290U AA
19599291
48413321
I want to write an If Statement is a column next to each entry that denotes two options either Broker or Agent. Where the code is say 19352510 then Broker and where it is say C084111X AA then Agent.
Broker codes will never contain a letter. The Agent code will always start and finish with a letter.
In a column I have data like 2W, 2BM, 4W, 6BM, 10W and 15BM. Question is how can I total all W and all BM. Total for W = 2W + 4W+10W = 16W and total for BM = 2BM +6BM +15BM = 23BM.
What formula should I used to get totals
I have an application where there is a column A with values of F1 through
F83. There is data in columns B,C,D,E,F AND G.
From time to time there is an addition in column A, the value being F1A or F2A etc.
The rows then have to be sorted so that F1A follows F1 and the next row would start with F2 rather than F10.
I'm doing a sort of product codes which are of different character length with some numeric and others alpha-numeric.
A small section of the sort is below.
I want it to end up like this:
4040
4040A
4040B
4040BTO
4040C
4040E
40400
40409
41402
42402
42402A
43400
But the sort ends up like this:
4040
40400
40409
4040A
4040B
4040BTO
4040C
4040E
41402
42402
42402A
43400
In other words, I would like product codes where the last character is a letter to be sorted ahead of product codes where the last character is a digit. The way Excel is normally set up, it sorts in just the opposite way.
I've got a list of reference numbers in column A
IT0001
IT0002
IT0003
And I need to find what the biggest number is without resorting the list.
I have data in column with combination of alpha-numeric like "Member # 308166 RCI Number 4801-60436". can I split this without using copy and paste?
So what i need is a 6 digit alpha numeric random (1000 entries)
so from some searching i figured that it should be...
=MID(A1,1+INT(RAND()*LEN(A1)),1)&MID(A1,1+INT(RAND ()*LEN(A1)),1)&MID(A1,1+INT(RAND()*LEN(A1)),1)&
MID (A1,1+INT(RAND()*LEN(A1)),1)&MID(A1,1+INT(RAND()*L EN(A1)),1)&MID(A1,1+INT(RAND()*LEN(A1)),1)
[Code]....
but when i fill down it auto it to a2 , then a3 etc... how do i stop that?
I might delete out the o O and 0 cause it gets confusing...
Also, it re-randomizes every time I open the file... is there a way to stop it?
I am trying to make a worksheet change the fill color depending on the data in the cells. I have two issues I cannot find the answers to.
View 12 Replies View RelatedI have cells with alphanumeric values. I need to extract the numeric values based on certain criteria and put these values in adjescent rows.
The sheet I am using has 3 rows . Row B contains data. Row C is Amount, Row D is Month, Row E is Action
To put values in Rows C, D and E , I need the data from row B in following criteria.
data in B row is as follows :-
RS 555/STMT DT 170807/BP12/TO PAY MEMBERSHIP FEE
RS.555/STMT 020907/BP12/ OFFER
ANNFEE RS 555/- / STMT 020907 / BP 12 / FIRST TIME
RS595/STMT 0807/BP12/ first time
MEM FEES RS 525 /STMT 120807 / BP12/1ST TIM
criteria for row C
if the cell contains "AMT" or "RS" or "INR" or "AMNT" or "RS."then extract the value till first "/" or "" and put it
under Amount row. ( E.g: "AMT 595 /" or "Inr 595/" or " Rs. 595")
criteria for row D
if the cell contains "stmt" or begins with "0" or endswith "07" then extract the value till first "/" or "" and put it under Month row.
criteria for row E
if the cell contains "BP" or "OP" then extarct the value till first "/" or "" and put it under department row. ( e.g " BP01 /" or "OP 02 ")
I've tried searching the forum here, but have not seen anything like my problem as follows:
I would like to convert the numeric value in a cell to a coded alpha
the numbers 1,2,3,4,5,6,7,8,9,and 0 would be coded as B,L,A,C,K,H,O,R,S,E respectively.
For example, if cell A1, held the value of 5750, the formula in cell A2 would result in KLOE.
The figures in Col A would be no smaller than 3 digits nor larger than 5 digits.
My VBA form for excel currently only accepts numeric. I want two of its fields to accept alphanumerics. Those two textboxe fields are cboIns and TextCmt in the code below.
Code for the form is given below.
VB:
Dim dic As ObjectDim Ctrls
Dim myTBoxes() As clsTxtBoxes
[Code].....
In have a worksheet with about 5,000 rows. In column there is a unique identifier for each row, however the unique identifier can take one of 12 different formats, namely:
L1314LAND00001 through to L1314LAND0XXXX
L1314CUST00001 through to L1314CUST0XXXX
L1314COMM00001 through to L1314COMM0XXXX
M1314LAND00001 through to M1314LAND0XXXX
M1314CUST00001 through to M1314CUST0XXXX
M1314COMM00001 through to M1314COMM0XXXX
N1314LAND00001 through to N1314LAND0XXXX
N1314CUST00001 through to N1314CUST0XXXX
N1314COMM00001 through to N1314COMM0XXXX
S1314LAND00001 through to S1314LAND0XXXX
S1314CUST00001 through to S1314CUST0XXXX
S1314COMM00001 through to S1314COMM0XXXX
These unique identifiers won't always appear in sequentiual order. In Cells B2 to M2, I want to be able to determine what the next entry for each of the twelve variations will be, so for example, if the current highest value in column A for the 'S1314LAND' range S131400421, in cell K2, I would want it to display S1314LAND00422, and if the current highest value in column A for the 'M1314CUST' range M1314CUST0036, I would want cell C2 to display M1314CUST0037, so anyone at a glance can see the next highest unique reference for the relevant set, rather than having to go through the unique identifiers in column A manually to determine the next entry in the series.
I'm not really sure where to start, when there can be more than one aplhanumeric entries ending in the same number, e.g. S1314CUST00500 and M1314LAND00500.
In column A I have alpha-numeric data similar to:
2
A1
3
A20
A186
B4
B13
1
C5
C3
And I need to sort them so that they are like:
1
2
3
A1
A20
A186
B4
B13
C3
C5
With the numbers first, in ascending order. Then the letters, grouped by letter ascending, and the number following them. But I can't have it where it looks at the first number after the letter (A1,A186,A20). It has to look at the WHOLE number and then sort it.
In column A I have alpha-numeric data similar to:
2
A1
3
A20
A186
B4
B13
1
C5
C3
And I need to sort them so that they are like:
1
2
3
A1
A20
A186
B4
B13
C3
C5
With the numbers first, in ascending order. Then the letters, grouped by letter ascending, and the number following them. But I can't have it where it looks at the first number after the letter (A1,A186,A20). It has to look at the WHOLE number and then sort it.
I have a column that's supposed to be an address, but somehow got the
company name mixed in at the beginning:
123 Main Street
One Park Place
Acme Company, Inc. 456 Easy Street
Alpha-Omega Dry Cleaning Four-Twenty Highway One
I can use the formula
=RIGHT(A1,(LEN(A1)-((MIN(SEARCH({0,1,2,3,4,5,6,7,8,9},A1&"0123456789")-1)))))
for stripping the text before an actual number
Acme Company, Inc. 456 Easy Street
to
456 Easy Street
BUT - I'm not sure how to strip before a text representation of a
number (one, two, three, etc)
Alpha-Omega Dry Cleaning Four-Twenty Highway One
to
Four-Twenty Highway One
I am trying to figure out a formula that will allow me to compare the
contents of cells within a range and let me know if there is a value that is
not the same as the others. For example:
Columns a,b,c,d,e and f and say "Joe"- this result is acceptable
Columns a,b & c all say "joe" and d,e,&f all say "Mary"- this result is
unacceptable
I want a formula or function that will tell me this wihout me having to
visually scan the data to determine this.
I have a set of text strings that have some number of alpha characters followed by some number of numeric characters. I need to separate the data into two cells.
Example in A1-A5
ABC123456
AB12345
A123456
AA12345
DEF123456
Desired results in B1 - C5
ABC 123456
AB 12345
A 123456
AA 12345
DEF 123456
I have data in column with combination of alpha-numeric like "Member # 308166 RCI Number 4801-60436". can I split this without using copy and paste?
View 9 Replies View RelatedProblem: String is broken into 2 parts within a delimeter.
Goal: To keep each String/Segment intact regardless of Alpha/Numeric.
I have a .csv file with 26 segments (commas). This file contains customer data: PO#, Order#, Carton ID, Address 1, Address 2, Address 3, etc.
I've written code to capture all 26 segments as: Input #1, Seg1, Seg2, ... ,Seg26. The variables work fine until it encounter a string with Numeric first then Alpha within the same segment.
For this example we have a string such as (...,187 Main Street, PO Box 369,...)
Seg4 = Address
Seg5 = PO Box
The Segment Variables in Input #1, get shifted when it encounters the numeric portion of the address...so the result becomes:
Segment4 = 187
Segment5 = Main Street
Segment 6 = PO Box 369.
So on my next loop when ReadLine is executed...all the variables are shifted and I can't focus on the specific segment that I need to do something to it.
It delimits when it encounters Numeric then Alpha within the string, but accepts the entire string into the variable when its Alpha then Numeric within a delimeter.
How I can keep the entire string in tact within each delimeter?
I want to record the amount of people attending a venue over a given period. The information presents names and did they attend. In column "D' from D5 to D45 the information will be yes or no. I want a formula that calculates the amount of YES and shows the answer in a numeric format
View 4 Replies View RelatedAguirre: The Wrath of God 552
Ai No Corrida 619
Aileen Wuornos: The Selling of a Serial Killer 821
Airplane! 671
Akira 764
Albero degli Zoccoli, L' 641
[etc]
I want to extract the page numbers (the final numbers) and place them into a new, separate column.
I am using Microsoft Excel X for Max Service Release 1.
I am competent on basic excel but not familiar with complicated formula etc.
how to retain the values of variables even after closing the workbook...Ref:have created workbook and renamed sheets as Day1,Day2,..,DayN..as and whn new worksheet is created.after saving and closing this application, next time when we open the application and create new worksheet it should create DayN+1.
View 9 Replies View RelatedMy spreadsheet contains a tasklist. It is generally sorted by priority (number); each row also contains a task ID ("T0100"). When I add a new task I need to know the last used task ID so I can assign the next one.
I've tried various built in functions but each expects numbers.
How can I insert in a cell (or display in a msgbox) the maximum text value?
For example, Given the data below I'd like to have show "T0888".
PRI TASKID
0 T0123
0 T0199
0 T0101
1 T0888
1 T0105
What I am doing is setting up a product ratecard sheet to run with our CRM system in work.
Each product has 10 quantities, with 10 different prices, but each product must have the same product code running down in column A
I have thousands of products to put in to dont want to manually type each code in.
I am ok with Excel, but I can not program in VBA, so i am looking for a formula to use.
The code is ZTRA-00001, which will stay the same for 10 rows, then there will be a space of 1 row and the next code for the next 10 rows in the column would be ZTRA-00002 etc.
I have created a simple UserForm to enter new customer details to the Customer List in the spreadsheet, form works fine except for one little thing, which is New Customer ID, which works, but only with numeric values like 1, 2, 3 and so on.
Basically what I need this for to do is once form is opened/called new customer ID need to be created, which could be and Alfa numerical set of characters like AA-01234, AA-01235, AA-01236 and so on.
Also, is there a way of posting newly added Customer ID in the MsgBox along with MsgBox "One record added to Customers List. New Customer ID is "
All of my attempts to create this are failing and causing errors.Here is my code, Customer ID is TextBox1.
[Code]....
I have another problem with this damn address file. Column H and I have data in them that is often mixed. As shown below, I have used A and B below, but its normaly in Column H and I. I would be greatul if some could write a macro to split the data into the two columns.
Rows 2-8 is what Im presented with. I would like them to look like 11-17
Note that the number in row 8 does not match, so is left for manual intervention....
I have a string that with spaces in between.
example:
X3PP2 1200 U
I would like to extract the "1200". How can i do this in VBA?