For some reason the following code, when executed, pulls a named range from the source workbook (sProj_Name). I feel like I have used this exact same code before and not encountered this issue. This named range is linked to the source workbook so if I save the file and re-open I get the wonderful 'would you like to update links' pop up. I cant figure out why, when I am forcing it to paste only values and formats, it is picking up this named range. In addition the source workbook has way more than one named range, so why it doesn't pull all instead of just one is a mystery to me as well.
VB: With Workbooks(sProj_Name).Worksheets(2) .Cells.Copy Sheet2.Cells(1, 1).PasteSpecial Paste:=xlPasteValues Sheet2.Cells(1, 1).PasteSpecial Paste:=xlFormats Application.CutCopyMode = False End With
Been playing with this for some time and can't quite figure it out. I'm trying to copy a named range and paste special value to another named range of the same size. I recorded a Macro that does what I need, and I'll use if necessary, but thought I'd try to consolidate the code a bit and can't get it to work. The recorded macro is as follows:
Sub PasteRanges() Application.Goto Reference:="DataCopy30Yr" Selection.Copy Application.Goto Reference:="DataPaste30Yr" ActiveSheet.PasteSpecial Format:=3, Link:=1, DisplayAsIcon:=False, _ IconFileName:=False End Sub
My attempt to consolidate was this:
Sub PasteRanges() Range("DataCopy30Yr").Copy Destination: Range("DataPaste30Yr").PasteSpecial (xlPasteValues) End Sub
I get the Run-time error 1004 Copy method of Range class failed when I try to run this. Again, I can use the longer version with no problem, but in the interest of learning and since I have spent some time not being able to come up with the solution, I thought I'd ask the experts opinions before I gave up on it.
Is there any way in Excel to create single-cell named ranges from a combination of the labels in the rows and column of a spreadsheet.
Here is an example:
CompanyA CompanyB CompanyC CompanyD
Sales 100 200
[code]....
I would like the first cell (containing the 100) to have a defined name of (something like) "SalesCompanyA", and the second cell to be "SalesCompanyB". And so on - e.g. the cell with 300 in it should be "CostCompanyA".
I can do it manually, but I have a huge spreadsheet & was hoping it could be automated. Just to be clear, it needs to be a single cell range. I know you can create a range from a selection - but this seems to create ranges of the entire row and/or column.
Macro that could look at a row and take the values of two cells, combine them and then create a range name for a third cell in the row.
For example; for row 5420, in column C there is the word Florida, in column D there is the number 6235, and in column F there is a sentence or two. Is there a way to automatically create a named range for the cell of column F that would be named FLORIDA6235? And if so, can the macro do this for every row even if the word and/or the number changes.
I have roughly 28,000 rows and nine columns that I am working with. That's why I was wondering if there was a way to automate this. There are 10 states and I don't know how many different numbers attached to the states, however there are many state and number combinations that repeat, so there would be several rows with Florida in column C, 6235 in column D but a different description in column F.
I have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.
However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.
What part of code do I need to change and to what to make it work for just 2 named ranges ?
I had an idea that I could use the level of indent in the first column to provide the name for the range. The easiest way to explain is with the example spreadsheet I have attached
Cells C5:C10 show how the naming convention should look like, basically Indent Level 0 returns a prefix (Sheet_Name_Prefix) and its corresponding row entry in Column A. Level 1 should return the last Level 0 name and its corresponding row entry in Column A.
I had a go at the code and it works for Level 0 but I can't get it to put to Level 1.
Sub Test()
'Dimension Variables Dim RowTitleEntries As Integer Dim NameLoop As Integer Dim IndentLevel As Integer
'Set the value of RowTitleEntries RowTitleEntries = 6
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
I m trying to get around here within the company I work for.
I'm interested to know how to set a specific range value e.g. "5 to 10" once a value is between those 2 numbers, and then if the value in the next row below is 34.12 it will be "30 to 35".
Here's an example code I constructed, but the darn thing just keeps on running
Horisontaly on the columns we have dates, day by day for a year +
For each day we chose from a drop down who is assigned to the action item. The problem is when there are 30-40 + projects and each have 20-30 lines of ation items it is hard to get the overview and avoid double entry. I would use conditional formating to do this, but firstly each project is separated by a line containing different formulas and I would not like the conditional formation to change these cells, and at the same time to put this up manually for each row would take a long time since there are 365 + rows.
how a VBA code could solve this little challenge? IT would also be beneficial to have it do the check upon cell change, that way we would not need to manually run the VBA to check.
Whenever there are two repeating numbers in column one, I want to reduce certain numbers in column 2 by a certain amount. The amount is determined by half the difference between the number in column B corresponding to the second repeated number and the number in column B corresponding to the row after the second repeating number. The range of numbers that are to be reduced begins with the row after the second repeating number and ends with the last row before number one appears in column A. The values in column A are integers, always starting with one. For example, 1, 2, 3, 4, 1, 2, 3, 1, 2, 3, 4, 5.
For the above example, after finding the repeating number two’s at A2 and A3, it would reduce B4 through B6 by half the difference between B3 and B4 (1/2). The values for B4 through B6 would be updated in column B. The same for the next repeated numbers, which is one at A7 and A8. Half the difference between B8 and B9 is 1.
I am trying to make a UDF that searches for a header, grabs everything under the header, and pulls it somewhere else. My UDF has three parameters:
1) Output_Range: the named range where the parameters will be pulled to 2) Header: the header to search for in order to copy the data underneath it 3) WorkbookName: the name of the workbook to search in
It looks like this:
VB: Function LoadParameters(Output_Range As Range, Header, WorkbookName As String) MyTimer = Timer 'Defining the variables. Dim HeaderCell, HeaderCellEnd, HeaderRange, Output_Range
I have some named ranges that refer to 5 pieces of data organized into a row. For example, the name MyNamedRange might refer to $C$5:$C$10.
I am trying to loop through each column and get the values in MyNamedRange, then change corresponding values in a different named range. However, when I try to use Offset to access the subsequent columns of MyNamedRange, it doesn't work. It only gets the value of the first column right, the rest return <EMPTY>.
How do I go about using named ranges instead of cell names(ie A4:A9)
Private Sub UserForm_Activate() Dim lngRow As Long Dim intIndex As Integer UserForm1.ComboBox1.Clear 'Clear combobox lngRow = 2 Do While Sheet1.Range("a" & lngRow).Value <> "" For intIndex = 0 To UserForm1.ComboBox1.ListCount - 1 If UserForm1.ComboBox1.List(intIndex) = Sheet1.Range("a" & lngRow).Value Then Goto NextRow End If Next intIndex UserForm1.ComboBox1.AddItem Sheet1.Range("a" & lngRow).Value NextRow: lngRow = lngRow + 1 Loop End Sub
I wanted to change "a" to the defined range "search"?
the code to add two independent named ranges cell by cell in vba. Both of the named ranges have the same structure and the sum would be posted to a third area of the same structure cell wise.
At the moment I have to click in the cell and then look at the cells used and look across to the title of the rows.
So for example, performance = D3*D4*D5*D6
I would like, performance = vehicles*availabliity*utilisation*TKM.
That is easy if I have just 1 option. But what if I have 3 options? Naming each cell would be a way to do it but pretty laborious, is there a 'smart' way to use named ranges here?
I'm creating a KPI spreadsheet which utilizes named ranges to allow for Dynamic charting. I've created the first data input sheet for one of the 10 areas being KPIed. The sheet has 60 named ranges in it.
The goal is to duplicate the existing sheet (Area 1A) 10 times and adjust the named ranges and formulas within the named ranges according to the sheet names.
Is there a way to accomplish this without having to manually recreate or edit every named range for each new sheet?
I want a sumIF function (based on three criteria) to fill the values of cells in a column so long as there are values in the cells in the column before that one. I was working with trying a loop, but have been shown a faster way is using the With function.
There are four named ranges that all exist on a separate sheet in the file: Crude, Location, Year and Volume. Based on the first three columns of the file I wish to have an output for the sum of volume based on crude, location and year.
Right now, my output simply returns the total sum of the "volume" range in each cell in the output column.
For example, if total sum of values in the volume column is 100 then my output column currently looks like:
I created a simply macro that will adjust the headings of a group of cells as follows.
But if I add a row/column to the sheet, it will then of course attempt to place the headings in the wrong cells.
I have now given that group of cells/range a Name of "AR_Buckets". But I'm not certain how to modify the macro to ensure it always places the information in the correct place.
I am having problems getting the code below to follow my intentions. I have 2 files. I have a temporary file that holds all the data that I need. I have a destination file that needs to have data copied into it. In the temp file, I have data for several dates and product types. What I intend to do is to do a vlookup in VBA to look for the date and the product type in the temp file and copy the appropriate data to the destination file. I have numerous named ranges both in my temp file and my destination file. For the code below, I wanted to make a loop to find the date in the temp file that is listed in the destination file. Once this is done, I wanted to find the product type in the temp file that is listed in the destination file. If both conditions exist, then copy a certain range from the temp file to the destination file. My intention is evident in the code, but I don’t think that I am putting in the correct “code format”.
(Using Office 2003 on XP Pro) I have two named ranges that I want to union into one big named range so that I can use the big named range in a validation table. Unfortunately the big range does not appear on the list of named range so I switched to VBA to try and lick this but really I was hoping a non-VBA solution exists. Exploring possible VBA solutions, here is what I have so far:
I'm trying to make my worksheet generate a bunch of named ranges whenever it is activated. However, I'm getting a "Not a valid name" error on the line in red. The value of r is a string, so I really don't see what the issue is. Another time, I got a object defined error, but I think I've declared everyhing too. That line is very similar to the line above, and tends to work once (the first time around the loop). After that, I get the errors I mentioned.
I have two named ranges, LV1 and LV2 and wish to select them for printing. If the ranges were fixed I would use - Range("A2:H4,A8:H10").Select - how do I do the equivalent using the named ranges in vba?
The worksheet contains 20 different datasets which are divided into separate 30 x 10 grids, all of which help comprise a larger 300 x 20 grid. I have defined each smaller grid/dataset as its own named range. Originally the entire dataset started in A1, but I am shifting it dataset down by 40 lines to create space to work at the top of my workbook.
I am wanting to create a data validation list in A1, then have cells A3:J32 populate with the named range I select in A1. However I also want this populated dataset at the top of the sheet to be a mirror -- not a copy.
Therefore once I have the data in my range available A3:J32, anything I manipulate would be mirrored in the original range in the lower portion of the workbook.
I am importing an external Sheet into my Excel workbook but it only imports the data not the named ranges. I need the named ranges to be imported and overwrite any existing range of same name.
Example:
In existing workbook Sheet I have a named range, ABC which is A1:E10 - in the Sheet I am importing the ABC range is A1:E12. So when I have done import I want named range ABC in my workbook to become A1:E12 (as per external Sheet).
This is the code that import data (but not named ranges)
