Pasting Entries Into Sheets Depending On Data On A Column

Jun 12, 2007

Let's say I've got nine entries of data. Column A is aligned like this:

One
One
One
Two
Two
Two
Three
Three
Three

What I would like to do is write a macro so that the three entries with "One" in Column A get cut and pasted into a newly-created sheet named "One." All of the Two's get cut and pasted into sheet "Two" and the same thing with the Three's.

View 9 Replies


ADVERTISEMENT

Copying And Pasting More Than One Column Between Sheets

Feb 5, 2014

Why my code is not working. When I choose a single column it works. Once I select more than one column it doesn't work. It something to do with my "column1:column2" reference.

View 2 Replies View Related

Pasting Data Into Filtered Sheets

Jun 18, 2013

How to paste data into a sheet that is filtered, so that only the filtered rows get populated?

I am using paste special values but it is populating every row in between despite them not being filtered.

View 2 Replies View Related

Copy Rows To Other Sheets Depending On Values In Column

Feb 7, 2007

I’ve done a search of the forum for a macro and found some post that seems to be about what I want to do, but unfortunately my minimal vb experience prevents me from adapting them to my requirements.

I‘ve got a workbook with three sheets; say Sheet A, Sheet B and Sheet C. I want the info in Sheet C copied to either Sheet A or B depending on the info in cells in Column A of Sheet C.

Sheet C contains customer info, there are about 9 column headings and up to 30 000 rows (Individual customers).

The cells in Column A will contain a number between 0 - 23. What I want the macro to do is, if a cell in Column A contains any of these numbers, 0, 1, 2, 6,7,8,9,10,17,19,20,21,22,23, I want that whole row copied to Sheet A and if it contains 3,4,5,11,12,13,14,15,16,18, I want it copied to Sheet B. The cells will only contain one number, never a combination.

View 3 Replies View Related

How To Transfer Entries From Master Data Sheet To Sub Sheets

Jun 2, 2014

I have a database with all employees in a worksheet. Employees are from eight different divisions (marked with acronym in column C). I have eight additional worksheets - one for each division (names of worksheets will be the same to the entries in column C in master sheet).

I want the information of employees (the whole row) to be transfered to the sheet of their respective division. So, whenever I make a change in the master sheet, the change is effective in division's sheet as well. And if I add an employee to the master sheet, they will be automatically added to the division's sheet.

View 4 Replies View Related

Duplicates Finding Entries In Column A Which Match Any Of Column C Entries

May 7, 2014

What I need to do is sort certain entries in longer list (column A, it is in .csv format and needs to be in it so coordinates and names and ID, all sorted with commas) and I have another list (column C) which is shorter list of certain IDs. I googled and tried and got some results for the basic structure but the fuction seems to fail. It doesn't matter how I get that third list done, but there is only one criteria: since the list in column A is really long and those entries need to keep the .csv formatting, the function should copy that info what is in the matching cells.

Let me try to put it simple: .csv cells from column A that have matching ID from column C should be copied to column B (or N).

the function I'm working with right now is

=IF(ISERROR(FIND($C:$C; A1))=TRUE;"0";A1)

View 13 Replies View Related

Sum Of A Column Depending On Data In Another Cell

Jan 7, 2009

I want to add up items in column H, but only if Column J says "yes" in the same row.

I tried a few methods as I always try to do, but I came up short with this one.

View 2 Replies View Related

Data Validation Depending On Column

Feb 22, 2007

Let's say I have data validation on column A, which only allows 2 values, "Number" and "Letter". Easy enough. If the value "Number" is selected in A1, when the user moves to B1, I want a validation list of 1,2 and 3, when they move to C1, I want a list of 4, 5 and 6 and when they move to D1, a list of 7, 8 and 9. However, if "Letter" is selected in A1, when the user moves to B1, I want a list of R, S and T, when they move to C1, U, V and W, and when they move to D1, a list of X, Y and Z. I tried using dependant validation, but can only get all three columns (B, C and D) to either be 1, 2 and 3, or R, S and T. The validation lists would be existing named ranges on a separate sheet.

View 2 Replies View Related

Adding Data In Column A Depending On Data In B

Feb 16, 2009

Adding data in column A depending on data in B. I have following macro:

View 2 Replies View Related

Specific Formula Executed In Column Of Data Depending On Selected Value In Cell

Apr 4, 2013

I have a sheet with a country in it in A1 (validation list).

Depending on the country in A1 a country specific IF command has to be executed on a column1 with first cel = A3. This IF command also relies on the values in column 2 and 3 on the same row. (B3 and C3 are in the IF cmd)

I taught to do it like this : =IF($A$1="Spain";$A$5;0) with A5 being the country specific IF command which should be executed when spain is selected. however when I do this, this only works for the first cell ( I cannot drag this formule down, since it will always give the value calculated in column 2 and 3 on row1.

I'm not sure if the best way to 'select' the country specific IF cmd is with another IF command..

View 5 Replies View Related

Separating Data Entries Of Different Lengths All In Single Column

Jan 20, 2008

a way to separate out data that has been all entered into a single column

code .....

The above information is a sample of the data. The data has been entered into 1 column, column A.

I want to separate the entries in to 1 column each for vehicle ID, full journal description, actual journal, EE code, Report total and equipment description.

View 9 Replies View Related

Moving Data From Rows To Columns - Depending On Unique Content In A Field In Column

Jun 24, 2014

I have a worksheet which contains 2 columns which is needed to work my problem.

Unique Work ID and Description

The unique work ID are the same for each description, but there are up to 5 different description associated with each unique work id.

I'm looking for an automated process but where to start to convert the 5 rows in the unique row and 5 column for the descriptions

View 8 Replies View Related

Pasting Formulas On Different Sheets

Dec 17, 2011

If I have a formula on Sheet2 which creates conclusions depending on data already existing on Sheet1 and then I need to paste the same formula on Sheet4 in order to get conclusions from Sheet3, then what can I do? Every time I am trying to paste the formula, it connects it with Sheet1 instead of Sheet3

In other words
Sheet1: Data
Sheet2: Extracted conclusions from Sheet1 data based on a formula
Sheet3: Data similarly organized as in Sheet1
Sheet4: How do I extract the same conclusions, but this time from Sheet3?

The formula on Sheet2 is:
=INDEX(Sheet1!$E$312:$E$5000;((COLUMNS($A4:B4)-1)*20)+1)

I would like to copy this formula from Sheet2, then paste it to Sheet4 and then to have it appearing as
=INDEX(Sheet3!$E$312:$E$5000;((COLUMNS($A4:B4)-1)*20)+1)

Is this possible?

View 7 Replies View Related

Copy And Pasting One Sheet Under Another For X Number Of Sheets

Sep 27, 2013

Code:
Sub Copy_and_Layout()

Dim ws As Worksheet
ThisWorkbook.Activate
For Each ws In ActiveWorkbook.Worksheets
ws.Activate
If Left(ws.Name, 5) = "Sheet" Then
Range("B2:G" & ws.UsedRange.Rows.count).Copy
Sheets("Rev New").Range("B1").Insert xlDown
End If
Next ws
End Sub

So far I have this as a code but it seems to only paste the last sheet at the top ....

View 3 Replies View Related

Copy And Pasting From Multiple Sheets To A Master

Jun 17, 2007

There is a file that contains multiple worksheets. Each worksheet contains a template.
I'm trying to create a macro that will go to each worksheet and gather the information on one line in a master sheet. Then go to the next work sheet and do the same but return the data for that on the next row. And continue to do so until all the worksheets have returned data.
So far I have recorded the macro for the first sheet. How do I get it to now go to the next sheet, do the same thing, but return the data on the next line so it doesn't over write the data from the first sheet?

View 9 Replies View Related

Looping Through Range Whilst Copying And Pasting To / From Different Sheets?

Jun 24, 2013

I have a matrix of coordinates in sheet ("layout") (eastings - V4:BR4, northings - U5:U100). I'm trying to run through each northing (row value U5:U100), for every easting (V4:BR4), by writing the coordinate value to sheet("ISO_model"), cell K18. Within the sheet (ISO_model) there is a model which gives an output in cell HA500. I'd like to write this output (for the specific easting and northing) back into the sheet ("layout"), so that I then have the x,y, z values to create a contour plot.

I've tried to start the look through the row of eastings, but it is not working.

Sub noise_contour()
For Each Cell In Range("V4:BR4")
'write coordinate into the model

[Code]....

View 5 Replies View Related

Macro: Copy And Pasting Variable Ranges On Seperate Sheets

Nov 4, 2009

I have attached the xls. I have an input sheet with 3 columns to enter data. Each column is linked to a separate worksheet with a formula (Carrys 1000 rows long). I need to be able to pull the populated data from those 3 worksheets and paste into 1 column continuously on another worksheet so all data is on top of another without any spaces.

I made an if statement so that if there isn't data pulling from the input sheet the a blank cell is left to indicate the last row to copy data from and paste on the final sheet.

View 5 Replies View Related

Hyperlink To Other Sheets Depending On Cells

Jan 6, 2009

how I would do the following, as I have been having a play but not managed to get anything.

I have two cells, C10 and C11, they both contain numbers. I want to create a hyper link that goes to the sheet called: Semester C11 Year C10

e.g. if the cell values are 2 and 1 respectively, I want the link to go to the sheet called 'Semester 1 Year 2'

View 9 Replies View Related

Displaying Sheets Depending On User

May 9, 2004

Possible to write code to hide selected sheets in an excel file depending on which user is using the file i.e. hiding sheets that are not applicable to that person while just showing the applicable sheets?

View 2 Replies View Related

Changing Sheets Depending On Dropdownbox

Feb 23, 2009

I have bunch of sheets lets call them

Germany, France, Belgium, Poland, Russia, Data

In the data sheet I have in F1 "Germany", F2 "France", H1 "Belgium", H2 "Poland", H3 "Russia"

In each of the sheets (appart from data) I have a validation list in cell D6 listing the data sheet values F1,F2,H1,H2,H3.

Now basicaly what I need is when I select Germany from the list it would take me to Germany sheet, when I select Belgium from the list it would take me to Belgium sheet etc.

Basically the sheets have always same name as the name in the list. I know i can write the code in individually but because I have a lot of these I was hoping there might be an easier way?

View 9 Replies View Related

Saving Sheets In New File In Different Folders Depending On Cell Value

Nov 13, 2012

I'm actually using a macro that saves all the sheets from a workbook in new separate files, and save them in a specified folder.

Code:
Sub Estrazione_Schede()
Dim n As Long
Dim myNome As String
Dim myPath As String
myPath = "D:path"

[Code] ......

What I'm trying to do is that, instead of saving all the sheets in one folder, the macro would save them in different folders, depending on specific values in a specific cell of each sheet. I tried to modify the macro like this, but it doesn't seem to work properly:

Code:
Dim n As Long
Dim myNome As String
Dim myPathOne As String
Dim myPathTwo As String
myPathOne = "D:pathOne"

[Code] .....

With this code the macro ends up to check the condition only in the first sheet and then it copies all the sheet in the same folder.

View 2 Replies View Related

Identifying Unique Entries Based On Unique Entries In Another Column?

May 29, 2014

I have a list of data and I want to identify the unique entries for both columns but the second column has to unique to the unique values in the first column.

Example List

Fruit
Color
Apple

[Code]....

View 9 Replies View Related

Highlighting Duplicates Entries Across Specific Sheets

Jan 20, 2012

I have 13 sheets of data in my open workbook. Column D, which includes blank cells at times, across each of these sheets maps the same info. of orders. However, I know there are several duplicates, and I want to clean them out. I am trying to figure out a way to highlight all the duplicates that appear only in column D beginning with sheet 4 and ending with sheet 13. I will leave the duplicates that appear on Sheets 5-13 alone, but I want to have them highlighted, so I can review the ones that appear on sheet 4 first, and then delete them.

View 1 Replies View Related

Pasting Into Last Row Of Column A

Mar 25, 2009

I'm trying to paste something into the row after the last row with data in Column A. What is wrong with my code?

View 2 Replies View Related

Speed-up Slow Macro Code: Entries In Column 73 - 85 Will Be Copied From WorkbookRust To The Other Workbook If The Numer In Column 5 Is The Same

Mar 25, 2008

my existing macro, as the run takes to much time to complete. (at least 20min) I've already tried several loops, but no one worked for me. Following situation: There are two excel files, entries in column 73 - 85 will be copied from WorkbookRust to the other workbook if the numer in column 5 is the same. Not every cell within this columns contains data, so the macro should automatically jump to the last entry in each of the above mentioned columns, instead of predefine the range as you see in the code below. After the data is copied to the other workbook, it will be filtered acc. to Sub FilterMain and then copied back to WorkbookRust. As already said, the whole thing works, just to lame.

Sub Allmacros()
Dim WorkbookRust As String
WorkbookRust = ActiveWorkbook.Name
ChDir "C:Documents and Settings vogtMy DocumentsRüstplausch"
Workbooks.Open Filename:= _
"C:Documents and Settings vogtMy DocumentsRüstplauschCH_Revenue_2008.xls"
Sheets("Main_Overview").Select
Windows(WorkbookRust).Activate
Application.run ActiveWorkbook.Name & "!UpdateEntries"
Application.run ActiveWorkbook.Name & "!FilterMain"
'not ask to overwrite existing file
Application.DisplayAlerts = False
Workbooks("CH_Revenue_2008.xls").Save
Workbooks("CH_Revenue_2008.xls").Close
End Sub

Sub UpdateEntries()......................

View 7 Replies View Related

Pasting Formula Down Column

Feb 16, 2009

I've got the basic formula I need to paste down a column. Is there a way to get the Row_Index_Number to change for me w/o having to manually correct it for each row? Copy and Paste does not change the Row_Index_Number. Maybe theres another formula or a trick that I can use?

View 3 Replies View Related

Average Column Depending On Values In Another Column

May 17, 2009

I have tried a few other examples in previous threads that use COUNTIF and ISERROR but I just can't get it right.

Basically I want to average the cells in column J (J2:J6,J8:J12,J14:J18, etc).
My aim here is to determine the average value for each day (Averaging 0 values in this instance is OK).

Now, the date in column A (A2:A6,A8:A12,A14:A18, etc) sometimes returns a blank value, depending on the day of the week (see attached example). This is because, in the full version of the workbook, I have Column A date linked to a perpetual calendar and therefore the dates can change cells depending on the year.

For the Date Cells that return a blank value, I do not want the AVERAGE equation to include the 0 value on these days.

For an example I have attached a month of February where there are blank date cells at either end of the column.

View 13 Replies View Related

Creating Multiple Sheets From Column Of Data

Jul 8, 2013

I have a database of information on which one of the columns is supervisor. I need to put each supervisor and associated employees on separate sheets. How do I do that?

Column Headers
Last First Title Supervisor Rating Box

Need the supervisor column broken out on a sheet with all employees listed in the data base.

View 6 Replies View Related

Comparing 2 Columns And Pasting Third Column

Jan 25, 2014

I have a requirement as shown below, what i want is to have another column which will display the priority of each case name as per the case id value.

The expected result is shown in TABLE 2, TABLE 1 is the requirement, I just want to have some excel formula or vba that can do it.

REQUIREMENT-
CASE_ID
CASE_NAME
REF_CASE_ID
PRIORITY

[Code] ..........

View 1 Replies View Related

Pulling Data To Separate Sheets Based On One Column

Oct 4, 2013

How to pull data based on column B to individual tabs.

I have the following data:

A B C D
Jane Doe | L1 | 20% | High
John Doe | L2 | 15% | Medium
Mike Smith | L1 | 60% | Low
Marie Smith | L4 | 10% | Low

I want to have the first tab/spreadsheet only pull records that have L1 values for column B

In the next tab/spreadsheet I want to pull records that have L2 values in column B etc.

What formula can I write that will pull all L1 records (A.B.C.D) in to Tab 1, then all L2 records (A,B,C,D) into the next tab?

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved