Refer The Cheapest And The Most Expensive Properties That Are In My Table
Mar 5, 2009
I have a table, a list of properties I am considering renting. Outside of the table, I have referenced the cheapest and the most expensive properties that are in my table.
This works fine, except when there are two properties that cost the same. Where a lot of the Vlookup questions I have read ask to return the 2nd/3rd value, I want to show them all, eg. if two properties of equal value are the dearest, I'd like to reference both, not just the 1st or 2nd.
I have 50 sheets (1 sheet per staff member) that will be linked to a Master Sheet that compiles the data. The staff members are based in 5 teams of 10. The names of the sheets are based on the person's initials plus the words Progress Day,
All formulas in the master sheet are based around linking to 10 sheets so I can view the performance of each team. My problem is that the composition of each team changes quite often and so the links have to be manually updated for each team. Is there any way, for example, of compiling a table of team initials like the one below:
AT EF FY DE CB RO PR TA NE SK HS
that could easily be edited so that the formulae containing the sheet names relate to the table rather than static sheet names?
Eg., If AT left the above team and was replaced by PG then I would update the list above and the current formula
='C:Documents and SettingsAll UsersShared DesktopProgress Day Daisychain[AT Progress Day.xls]Sheet1'!D32+'[EF Progress Day.xls]Sheet1'!D32
would update to:
='C:Documents and SettingsAll UsersShared DesktopProgress Day Daisychain[PG Progress Day.xls]Sheet1'!D32+'[EF Progress Day.xls]Sheet1'!D32
Have a formula that quotes the supplier at cell D2 , is there a macro that will highlight the minimum value each line that is 80 and 50 to be highlighted
I have to excel files, both have the same data. I created a pivot table macro on the first file. I want to be able to open the second file and use the shortcut to create the pivot table. the problem is that it refers back to the original workbook I created the macro on. How do I change the code to make it refer to the current workbook?
The macro im using copys a table from excel into a email. Unfortunatly the email is not readable for blackberry users due to the table properties.
I need to change a few properies. This is what i do manually.....
In outlook i then hover over the table right click then select "Distribute rows evenly" then i right click again but this time i select "Table properties" i then go to the "Row" Tab
i then untick the "allow row to break across pages"
then tick "specify height" and change the value to 0.4 cm and finally change "row height is" to "exactly"
Below is the whole code im using so far....
Code: Sub Mail_Selection_Range_Outlook_Body() Dim rng As Range Dim OutApp As Object
1. I am trying to record a macro where I select a Pivot Table. But in the recorded macro "Pivot Table name" is not recorded neither the Pivot Field Property only the Range name is recorded. But on other systems (workstations) these details get recorded. Does this have something to do with excel settings?
2. I uploaded a macro enabled excel file on my company's "sharepoint" the drop down boxes present in the file get populated via a macro in "ThisWorkbook" page but sometimes these drop down boxes don't show any values. What can be the reason for this? Can't share the file because of data security policy of my organization.
In Excel, I want VBA to refer to the SENT ITEMS folder in Outlook. I want to loop over all sent items, and if the email address satisfies a condition, then record that fact in Excel. I am good at VBA in Excel, and I have a passing knowledge of VBA in Outlook, but I don't know how to refer to Outlook within my Excel VBA.
Dim FileToOpen FileToOpen = Application.GetOpenFilename _ (Title:="Please locate BlankSAMSRegister.xlsm", _ FileFilter:="BlankSAMSRegister.xlsm (*.xlsm),") If FileToOpen = False Then MsgBox "No file specified.", vbExclamation, "Error" Exit Sub End If Once this second workbook is open, how do I refer to each one within the subsequent code?
I really need the parent workbook to be named as wb1 and the child to be names wb2 so I can flick between the two in the next macro... I can get the parent using thisworkbook.name, but how do I get the child?
I have a check box whithin a worksheet. This CheckBox doesn't have any linked cell, and doesn't have any macro asigned. know I would like to refer to the value of the checkbox by vba kind of: ?ActiveSheet.Shapes("CheckBox1").value=true 'from the vba's inmediate window
I have multiple sheets as Name1 ; Name2 ; Name3 and each sheet have a value on cell A1 for any number let say between 0 to 100. On another sheet call SheetName, I have A1=Name1 ; A2=Name2 ; A3=Name3.
I have formula as:
[Code] .....
The INDIRECT formula work to refer each cell A1 in each sheet, however if the sheet name include a space then it won't work anymore. How to make it work with the sheet name with space?
The summary page summarises the source data into how much revenue each department has made over 12 months.
However the formula in Summary worksheet column B will only total up the amounts if the month in the Source worksheet column B is the 1st of the month. How do I change the formula in Summary worksheet column B to purely go by month and ignore the day?
The "summary" tab will be calculating 20 statistics for each of the 30 or more tabs. In an effort to automate this - can I replace writing "January!" with a cell reference? For example; instead of writing = sum(january!a:a). Could I write = sum("A1"a:a), with the A1 Cell = january!. Obviously I tried this and it does not work but I am not sure if there are other options.
I've got a workbook that increments in sheets for each new week. I have a cell showing the current week number for that sheet ( lets say cell C1) and any formulas that need to reference data from the previous sheet do in 'indirect' function which basically looks at the current week number ( lets say week 20)in cell C1 and minus's 1 to navigate to the previous week (week 19).
I was wondering if there was a way to reference the previous sheet purely by the order they're in.
So say i have 5 sheets named "1,4,5,8,9" and these represent week numbers so the sheet named '8' in cell C1 would have '8' standanding for the week number but cells that wanted to reference the previous sheet couldn't do the 'indirect' C1-1 as there is no 'week 7'.
The weeks used could vary alot so a formula to reference the directly previous sheet is needed.
the '$A$G2-1' part is the bit that redirects to the previous sheet based on it's name, what i think i really need is to replace this part with a 'PrevSheet' function but i'm unsure how.
I'm trying to do is add a signature box (for inventory-taking accountability) directly below the pasted area after I paste it. Now, of course, the copied and pasted area could have 5 rows or it could have 15, and when I copy it from the first sheet and paste it into the second it doesn't preserve the name of the range on the second page, so what I really need to do to add the signature box directly below the last row in the pasted area is specify the location in relation to the last row in the pasted selection, but I don't know how to do that. Using ActiveCell always refers to the top-left-most cell in the selected area. So...
If I have an area selected, how do I refer to the bottom-right-most cell in that selection (in the same way that ActiveCell refers to the top-left-most cell)? Or at least the bottom row? Or, even better, the row below the bottom row?
A2 refers to a linked cell but I have tried without the link there still no joy. Together they would generate for example "DCA_RES" which would refer to a column range in a different sheet on the same workbook.
I want this to work so that I can implement more easily new lines to refer to different sheets. (Drag to copy) instead of having to copy and edit a formula 100 times.
I'm trying to call a function that is stored in a cell as a text string. In cell A1, I have the text Sum('Sheet1:Sheet3'!C3). I want to call this function from a different cell. Is this possible using the pre-defined functions, or would I be better creating my own function?
I have a selection that I am going through with a 'for each' and then performing actions if the cells meet a certain criteria. I have been referencing nearby cells with the offset function, but now my sheet is too big and I need to change the code often and the offset function is difficult, is there anyway to refer to cells without the offset function, preferably by column letter
PHP Code:
For Each Cel in SelectionIf Cel = x Thenvalue1 = Cel.Offset(0,39).Valuevalue2 = Cel.Offset(0,5).ValueEnd IfNext Cel
with the below code i want the highlighted in red (RC11) to refer to last column and last row.
Code: Sub try () Dim finalrow As Long Dim finalcol As Long Set wspo = Worksheets("Previous Order") wspo.Select finalrow = wspo.Cells(Rows.Count, 1).End(xlUp).Row finalcol = wspo.Cells(1, Columns.Count).End(xlToLeft).Column
In my current spreadsheet I use Offset to change the values of various cells. The problem is that if I make any changes to the columns it throws the whole offset thing off. So, instead of using offset to paste all the data is there an alternative that would work better?
I was thinking maybe I could name a column as a range and then have the cell in that row equal a value.
It has a tab for every week in a year so 52 in total. The first tab is supposed to give some general information. I have a few questions on how to implement things.
1 i wanna be able to view the Total amount hours worked in my current week.
