Run Time Error 50289

Feb 5, 2007

My Addin code is protected, and when i try to load my Addin, this error appears

Run-Time error: 50289 "Cannot perform the operation since project Is protected"

View 4 Replies


Run-time Error '50289' :: Project Protection / Module Protection / Module Visibility

Aug 18, 2004

I recieve an error :

Run-time error '50289':
Can't perform operation since the project is protected.

When i try and run my code.

The code does add parts to modules and workbook events, but I need the code to be protected.

View 9 Replies View Related

Run-time Error '91' When 'On Error Goto' And Cells.find

Oct 8, 2008

I have written a Excel (2003) that searches a worksheet for a string in any cell. If the string is not found, it uses the 'On Error GoTo' command to jump to a given label. It works fine on the first string not found. When it searches for the next non-existent string, it fails with:

'Run-time error '91':
Object variable or With block variable not set'

Do I have to clear a buffer after each cells.find search?


View 7 Replies View Related

Run-time Error Every Other Time The Macro Runs

Oct 10, 2006

I'm not sure why this is happening, but every other time I run this one specific macro, I get a "Run-time error '1004': Paste method of Worksheet class failed". I even tried running this macro, then running a different one, then running this again, but I still got the error every other time.

Every time I get the error, it highlights this line of
Sheets("Regenerate Request").Paste

This is all of the code up to where I get the error:

Sub YesRegen()
' after user has hit Yes on the RegenerateRequest macro, this posts the new request to
' the log, generates the new file and attaches it to an email

Application.Run "LogUnprotect"
Range(Range("A" & ActiveCell.Row), Range("K" & ActiveCell.Row)).Copy
Sheets("Regenerate Request").Activate
Application.Run "RegenFormUnprotect"
Sheets("Regenerate Request").Paste

View 10 Replies View Related

Run Time Error 1004 Application-defined Or Object-defined Error

Mar 5, 2013

I have a relatively complex report that I work with and a worksheet is no longer required. I have deleted the worksheet and reference to it hwoever when running the macro to pull all the data, it gets to the summary of all the data and i get the Run Time Error 1004 Application-defined or object-defined error pop up. ON reviewing it, it is on this line ActiveCell.Offset(0, 0).Range("a1:a" & Range_Height).Select of the below code...

Sub GetRangeName()


use code tags around code. Posting code without them makes your code hard to read and difficult to be copied for testing. Highlight your code and click the # at the top of your post window.

View 1 Replies View Related

Run Time Error 1004 (application-defined Or Object-defined Error)..

Apr 26, 2009

I have a simple function below to put in different forumlas in different cells to get stock quotes. When I run this I get runtime error 1004 application-defined or object-defined error. The first formula goes through but vba chokes on the next formula: ActiveCell.Offset(I - 1, 4).Formula = username

View 10 Replies View Related

Run-time Error '1004' Application-defined Or Object-defined Error

Aug 12, 2009

Run-time error '1004' Application-defined or object-defined error. I am trying to use this

View 2 Replies View Related

Run Time Error 1004 - Application-Defined Or Object Defined Error

Oct 4, 2009

I was trying to use the below code

View 4 Replies View Related

Error Message "run Time Error '424' Object Required"

Aug 17, 2008

For some reason my form won't open when the workbook is opened. I get an error message "run time error '424' object required" (which happens when I have in the BOTH workbook_open event and the userform_initialize event (oops)). When I removed from the userform_initialize I don't get an error but I also get no form. I recall having this issue before but I can't recall how to fix it.

Can I call the userform_initialize event from the workbook open event to get around this successfully and properly?

View 9 Replies View Related

Run Time Error 1004 (Application Defined Or Object Defined Error)

Dec 4, 2009

I keep getting a Run Time Error 1004 (Application Defined or Object Defined Error) when my sub reaches this line:

ActiveCell.Formula = "=SUM(D222,D224,D226,D227,D229,...)"

In the actual line of code the "..." above is another 20-30 or so cells in column "D". Probably no more than 150-170 characters in the line.

If I remove half of the cell range names it works, but I need all of the cell ranges for the equation.

View 9 Replies View Related

Run Time Error 91

Oct 21, 2008

run time error 91 ...

View 14 Replies View Related

Run Time Error 438

Nov 12, 2008

I have the following code in a macro and when it is run I get a Run Time Error 438 Object doesn't support this property or method. This occurs at the first occurrance of the destination/source.

View 5 Replies View Related

Run-time Error 424

Feb 26, 2009

I have the main form completed and everything appears to be in order. So I made a button on the first sheet that simply calls for the main form to be shown. However, every time I click it, I get the run time error 424 object needed thing. I don't understand because the button is calling the form and the names are all correct. When I click debug, it takes me to the small code for the start button. Below are the codes for the start button and the main form.

View 10 Replies View Related

Run-time Error '13':

Dec 11, 2009

I have a line of code to enter a date on a spreadsheet from a user form:

View 2 Replies View Related

Run Time Error 424

Jan 25, 2010

Getting a run time '424' error with following code (object not defined). Not sure if I have it set up correctly.

View 6 Replies View Related

Run-time Error

May 4, 2007

I am getting Run-time error '91':

Object variable or With Block variable not set

In my mind everything checks out, but I am still very new to all this.

Here is the
'Shifts cells to make space for inserted VFD
Dim CheckBoxes As Integer
Dim UpLeft
Dim LowRight
Dim CountCells As Integer
Dim MoveTo As Range

View 9 Replies View Related

Run Time Error 91 ..

Sep 10, 2007

I'm gathering and ordering data. It's in the biotech field so I have to work with a lot of reaction formulae and compound abbreviations. Alas those are not standardized. So I have gathered all the compounds used by different organisms and standardized their abberviations and I want to replace the abbreviations used in the reaction formulae of the organisms with the standardized abbreviations so I can compare the formula with each other.

This resulted in a list of formulae, and a list of 2 columns, 1 the old abbreviations and the other the new abbreviations. I wrote a macro to pick an abbreviation out of the old abbr column and find it in the formula list. Then the old abbreviation should be replaced with the new abbreviation.

I got it working but the problem is that some abbreviations are longer than others and thus the smaller ones may resemble letter combinations in the larger ones. This can easily be solved by sorting the abbreviation list so that the largest abbreviations are on top and will be checked first. However, after I did this the macro didn't function any more. I have no clue what to do.

Sub ReplaceAbbrBoroWithGeneral() ...

View 9 Replies View Related

Run Time Error '009'

Jun 25, 2008

I am getting a run time error and highlighting this section of code.

The entire code I am using is below. This has worked fine on my maching
now trying to use it on another exact machine I am getting this error.

The way the code works..

It navigates to a webpage that allows the user to download the data which is called

I think I may need to tweek the .xls file extention properties. What do you think?

Dim lnk
Dim frm
Dim start
Dim fin
Dim drp1
Dim drp2
Dim src1
Dim NAMC As Integer
' This macro will automatically open and download the TMMK-VEH daily scrap
'and store the file in the same directory

Set QPR = CreateObject("InternetExplorer.application")

QPR.Visible = True

View 9 Replies View Related

Run Error Time '91'

Jul 27, 2008

I'm using the code

'Changes labels from zip code entry
Private Sub Textbillingzip_change()
Label42.Caption = Sheets("lists").Columns(10).Find(Textbillingzip.Value).Offset(0, 1).Value
Label43.Caption = Sheets("lists").Columns(10).Find(Textbillingzip.Value).Offset(0, 2).Value
End Sub
Private Sub Textsetupzip_change()
Label44.Caption = Sheets("lists").Columns(10).Find(Textsetupzip.Value).Offset(0, 1).Value
Label45.Caption = Sheets("lists").Columns(10).Find(Textsetupzip.Value).Offset(0, 2).Value
Label46.Caption = "Zone " & Sheets("lists").Columns(10).Find(Textsetupzip.Value).Offset(0, 3).Value
End Sub
I would like to have some error message pop up (or something else) rather than the current Run Time '91' error when the imput from either textbox is not found on the sheet "Lists"

View 9 Replies View Related

Run Time Error 400

Jul 31, 2009

I've written this macro to get data from a .csv and import into my spreadsheet however I get an intermittent "400" error, when I get the msg it says "method 'range' of object' _global failed".

Sub get_confirm_file_from_inbox()

Dim strPath As String
Dim strFile As String
Dim wbname As String
On Error GoTo Errorcatch
wbname = ActiveWorkbook.Name
strPath = "C:xxxManageCentralinbox"
strFile = Dir(strPath & "confirm*.csv")
Do While strFile ""
Range(Selection, Selection.End(xlDown)).Select
Application.CutCopyMode = False

View 9 Replies View Related

Run Time Error 9

Mar 1, 2010

i have a problem in using vba and each time I run my project I get

Runtime error "9" Subscript out of range :'(

and the line of code in question is:

pr_pri.Worksheets("wspr_pri").Cells(13, 4).Activate

here's the entire code for the macro:

Sub prpri()
Dim i%, j%, k%
Dim iLRA As String, iLRN As String
Dim Y As Boolean, Ys As Boolean
Dim TabloA(), TabloN()

View 9 Replies View Related

Run-Time 91 Error

Dec 19, 2005

why my code fails at the point labelled (Run-Time 91 error). From reading the help I think it has something to do with using a set statement within a with...end with block, but I'm not sure.

Sub GetReport()
Dim ReportName As Variant
Dim Reportwkbk As Workbook, Dbasewkbk As Workbook
Dim Reportwksh As Worksheet, Dbasewksh As Worksheet
Dim AgentName As String, Extension As String
Dim dtmDateStart As Date, dtmDateStop As Date
Dim i As Integer, x As Integer
Dim FindAgent As Range

' On Error GoTo ErrorHandler

ReportName = Application. GetOpenFilename("Excel Files(*.xls),*.xls" _
, , "Select Report to Import")

If ReportName = False Then
MsgBox "No report was" & vbCrLf & "selected.", vbExclamation, _
"Report Error"
With Application ...........................

View 9 Replies View Related

Run-time Error 380

Apr 14, 2006

I have a userform with several comboboxes. When I hit the "next" button, it goes to the next row down, but if that is empty, then I'll get an error of: Runtime error '380' Could not set the Value property. Invalid property value. Here's the basics of my code. I will be more than willing to email the file. It's too large to post.

Private Sub LoadRow()
txtTapeNumber.Text = ActiveCell.Value
txtCode.Text = ActiveCell. Offset(0, 1)
cboChannel.Value = ActiveCell.Offset(0, 2) <--error here
cboBrand.Value = ActiveCell.Offset(0, 3)
cboFormat.Value = ActiveCell.Offset(0, 4)
cboLength.Value = ActiveCell.Offset(0, 5)
cboCategory.Value = ActiveCell.Offset(0, 6)
cboVersion.Value = ActiveCell.Offset(0, 7)
txtTapeTitle.Text = ActiveCell.Offset(0, 10)
txtKeywords.Text = ActiveCell.Offset(0, 11)
etc...(more txt boxes)

Here is my next button code...

View 4 Replies View Related

Run-time Error 438

May 15, 2006

I am trying to print a form from a CommandButton. I am getting

'Run-time error 438
'Object doesn't support this property or method

With this code on the worksheet:

ActiveSheet.PageSetup.PrintArea = "PrintInv01"
Application.PrintOut ActivePrinter:="Auto HP DeskJet 895Cse on FILESERVER on Ne10:"
ActiveSheet.PageSetup.PrintArea = ""

Debug highlights the second line.

View 4 Replies View Related

Run-time Error '91'

Jun 16, 2006

I have devised this code that you see below to take and post data into a tracking spreadsheet. The odd thing is if I run this from the module itself it works fine, but when I try to run it from here:

Private Sub Workbook_BeforeSave (ByVal SaveAsUI As Boolean, Cancel As Boolean)
Run "PostToTSRS"

I get an error: "Object variable or with block not set"
on the line that reads:

Set tsrs = wbs. Sheets("TSR Summary")


Sub PostToTSRS()
Dim wb As Workbook
Dim wbs As Workbook
Dim sht As Long
Dim ws As Worksheet
Dim tsr As Worksheet
Dim lastrow As Long
Dim rng As Range
Dim c1 As Range
Dim rng2 As Range
Set wb = ThisWorkbook
sht = Worksheets.Count

View 6 Replies View Related

Run-time Error 9

Feb 14, 2007

I have this code to know if a workbook is open, and then open if it isn't. This code was running well since this morning. I don't know what I touched to make it not to work.

Public Function IsOpen(FileName) As Boolean
Dim myBook As Workbook
Set myBook = Workbooks(FileName) 'Here is the Run-time error
If myBook Is Nothing Then
IsOpen = False
IsOpen = True
End If
End Function

The Workbook FileName is not open, this code crashed when i tried to test what happens when is not open.

Heyyy, I solved it.
I have to put the next line
On Error Resume Next

View 2 Replies View Related

Even Handler Causes Run-time Error 5

Apr 5, 2013

I have a userform that reads data from a sheet with thousands of records (lines) each record with some 30 cells (columns). I wanted the user to scroll up & down in the sheet, using the keyboard arrows and I wanted the userform to show the relevant record, where the cursor stands. For this purpose I created an event handler (Worksheet_SelectionChange) that identifies the scrolling, populates the form with the relevant record data and then returns the focus back to the sheet. The command I have used to send focus back to the sheet (so the user can keep scrolling) is:

AppActivate "Microsoft Excel" & " - " & ThisWorkbook.Name

Now comes the bizarre part... This macro can work perfectly for hours and then decide to "die", or can work on one computer but not the other (all with Excel 2007, BTW). When the macro dies (or if it does not work, to begin with), the debugger points to the command I mentioned, with an error message "Run-time error '5' , Invalid procedure all or argument."

how to make my macro "stable" (make it work always and on every computer)?

Unfortunately, I cannot upload the file, because it contains confidential data (and it is not in English...).

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
lr = Cells(Rows.Count, 1).End(xlUp).Row
If Target.Column < 2 And Target.Row > 1 And Target.Row <= lr Then
crow = ActiveCell.Row


View 5 Replies View Related

1004 Run Time Error

Apr 9, 2014

I have a sheet that will force user to enable macro before revealing the sheets and enabling them to key in data. But because I need to protect the workbook from user deleting sheets and also having some locked cells. I got the run-time error 1004 unable to set visual property of worksheet class

View 1 Replies View Related

Run Time Error 1004

May 5, 2014

the problem I'm having is that when trying to copy the value of cell A2 and paste it in cell A4 with (INSERT with the second button of the sheet). this give me the error RUN TIME ERROR '1004 '.

View 7 Replies View Related

Run-time Error 9 On Activate

Nov 2, 2007

Learning VB6 by trial and error from code snippits on the web, however, am embarrassed to say I can't solve this simple one:

Trying to Open an Excel sheet and read it from VB6 code written in another Excel file.

View 12 Replies View Related

Copyrights 2005-15, All rights reserved