Sum With 2 Criteria Across Multiple Sheets

Dec 29, 2006

My question is similar to the thread Count/ sum with two criteria from multiple sheets. For example, I would like to use SUM Formula the number of widgets sold by store (Column A) by month (Row 5) for each salesperson (sheets Homer, Marge, and Lisa). I'm using the following Count Or Sum Two Criteria From Multiple Sheets equation to achieve the desired results: =SUMPRODUCT(SUMIF(INDIRECT("'"&\$A\$1:\$A\$3&"'!A:A"),\$A6,INDIRECT("'"&\$A\$1:\$A\$3&"'!b:b")))

where my worksheet names are in range A1:A3, the store names are in range A6:A10, and the months are in B5:D5. However, for each month, I have to manually change the column ie. from "'!b:b" to "'!c:c", "'!d:d", etc. In my real worksheet, the columns extend down to ED so to manually change the range would be extremely time consuming.

Excel 2010 :: Counting Cells With Multiple Criteria On Multiple Sheets In Workbook

Aug 5, 2012

I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---

=SUMPRODUCT(COUNTIF(INDIRECT("'"&\$H\$1:\$H\$43&"'!\$R1"),2*(AND("'"&\$H\$1:\$H\$43&"'!\$E1">"'"&\$H\$1:\$H\$43&"'!\$F1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&\$H\$1:\$H\$43&"'!\$S1"),2*(AND("'"&\$H\$1:\$H\$43&"'!\$G1">"'"&\$H\$1:\$H\$43&"'!\$H1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&\$H\$1:\$H\$43&"'!\$T1"),2*(AND("'"&\$H\$1:\$H\$43&"'!\$I1">"'"&\$H\$1:\$H\$43&"'!\$J1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&\$H\$1:\$H\$43&"'!\$U1"),2*(AND("'"&\$H\$1:\$H\$43&"'!\$K1">"'"&\$H\$1:\$H\$43&"'!\$L1"))))

but it returns a value of zero each time. Clearly there is an error in the formula.

Here is some background:
-- \$H\$1:\$H\$43 is a block of cells that has the names of the sheets in the workbook
-- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing.
In the entire workbook, I want to add 1 (counting function) only when:
R1=2 AND E1>F1 or
S1=2 AND G1>H1 or
T1=2 AND I1>J1
U1=2 and K1>L1
on each appropriate sheet in the workbook.

Excel 2003 :: Formula For Counting Values Across A Range Using Multiple Criteria Across Multiple Sheets

Feb 9, 2014

I have saved this on a 2010 workbook as I am at home but this will be used on a 2003 workbook.

I have several projects on one spreadsheet which multiple users will be working and I am trying to create a summary sheet of the work carried out.

Each user is expected to carry out a task on each row of the data held in each worksheet (research, call, update etc) and each task (Option 1-5) is assigned a value. Each user is expected to meet a certain level of points per day to calculate productivity.

I am looking for a sumproduct along the lines of the summary sheet attached but mine just takes one sheet into consideration and I need one for all sheets.

Excel 2010 :: Lookup Multiple Criteria Across Multiple Sheets?

May 28, 2014

I have a Excel 2010 workbook used to rota in a large amount of staff for a call centre, which is split into four teams. Each sheet corresponds to a month of the calendar year eg Jan201, Feb 2014 etc..

What im trying to do is put in a sheet at the front of the workbook that I can select the team, which populates the list of staff in that team and then checking across a specified date range gives the shifts that those respective staff will be working for the set time period (probably be looking at a seven day period and a 1 month period). (This in turn will be printed out to give to the staff members.)

Grabbing Data With Multiple Criteria Across Multiple Sheets

Jun 24, 2014

I've attached a sample sheet to this message.

What I'm trying to do is grab data from the raw data sheet and paste it into the master sheet based off of certain criteria. I want to list any accounts that are not correct.

For example, I want to look through the Raw Data sheet, find the account that contains campaigns which are not correct, and then list the name of the account on the Master sheet. I only need the account name listed once on the Master sheet.

Sample Data.xlsx‎

Sum Of Multiple Cells Within Multiple Sheets With Varying Criteria

May 5, 2013

I have a spreadsheet that has about 50 sheets and a summary sheet at the front the layout of the summary sheet is column A has skill sets from A4 to A20 and across the top it has week commencing dates from F3 to about BA3 (dates go from w/c 06/05/13 to 08/12/14). On the other sheets they have the dates in the same columns but the skill sets vary as to each project, some projects may have two of the same skill set in column A because there is two people needed who can do the same thing, I need to total up the days over the sheets for each week and skill set.

I have been using the SUMIF formula as follows:

=SUMIF('Sheet2'!A8:A10,'Summary'!A4,'Sheet2'!F8:F10)+SUMIF('Sheet3'!A8:A15,'Summary'!A4,'Sheet3'!F8:F15)

And so on for each sheet and then change the formula for the next skill set and then again for the next column.

Is there a way of doing this without having to enter a formula into each cell, at the moment I am coping and pasting the formula into word to do a find and replace to change the SummaryA4 to SummaryA5 etc and then into the next cell for the corresponding date.

So to make this seem like it makes any sense I am looking for say an 'Administrator' in all the project sheets over all the dates and for it to add it up for the summary sheet. Under the corresponding week against the skill set.

So it would be F4:F20 for w/c 06/05/13, G4:G20 for w/c 13/05/13 and so on until all skill sets.

SUMIFS With Multiple Criteria Between Sheets?

Mar 21, 2014

I'm trying to sum data based on a the criteria of a date being between a certain range and sorted by a particular name.

I have included a sample sheet with two tabs:

Totals-I would like to get the sum of the hours a person worked in the range of dates being 1/1/2014-1/24/2014 (which is D1 and E1 in the current charges sheet) Current Charges-this is the page that I would like to gather the information from.

Below is a sample of the formula I was trying to use, but I get an error....my interpretation of what I was trying to input is as follows: Sum C2:C34 in the current charge sheet if B2:B34 is greater than or equal to D1 on the current charges tab (which is 1/1/2014) and B2:B34 is less than or equal to E1 (which is 1/24/2014) with A4:A34 in the current charges sheet equal to A2 on Totals sheet.

SUMIFS('Current Charges'!C2:C34,'Current Charges'!\$B\$2:\$B\$34,">="&'Current Charges'!\$D\$1,Current Charges'!\$B\$2:\$B\$34,"<="&'Current Charges'!\$E\$1,'Current Charges'!\$A\$4:\$A\$34,A2)

Test Data:

SUMIFS Test Data.xlsx

Search Multiple Sheets For Criteria In Col A?

Oct 30, 2013

I have thought about recording a vlookup but this might be messy and prone to errors. Is there anyway to search through multiple sheets for a value (code) in Col A sheet 1. And return X in sheet 1 in the next column.

Print Multiple Sheets Based On Criteria

Sep 5, 2007

I am trying to find a way to select and print multiple sheets based on a criteria or a list. I have a large worksheet with many sheets. Each sheet falls into one of three categories, and I want to be able to automatically print all tabs in each category. I have all of the sheets rolled up into a summary where I have access to all of the sheet name and print criteria.

Pull Data From Multiple Sheets To One Sheet If Criteria Met?

Jun 16, 2014

I have a spreadsheet with 12 tabs (one for each month of the year). What I need is a macro/function that on execution will pull all rows from each sheet that has the word "overdue" in cell E from E9 down. I need the whole row of data being taken into a new sheet.

So for example, in each sheet there could be the word overdue appearing in 30 out of 500 rows I need those complete rows (A to Y) being put into another sheet for ease. At the moment I am filtering each sheet and copying and pasting into a new sheet for each bloody sheet (LOOOONG way).

The worksheets are titled: Jan 14, Feb 14, March 14, April 14, June 14, July 14, Aug 14, Sept 14, Oct 14, Nov 14, Dec 14

Summarize Data Meeting Criteria, From Multiple Sheets

Jun 30, 2009

I have a "SUMMARY" sheet and then five other sheets. I need to be able to extract the data which is >0% from each of the individual sheets and capture the results in the relevant section of the "SUMMARY" sheet.

For example, the data from sheet "PAYG" would need to be entered into cells F148:AJ155.
In each instance it is just the "model" detail I need to capture (column D)

Lookup Multiple Criteria & Sum Result On Multiple Criteria

Oct 21, 2006

I am trying to solve a problem. I am currently using this formula
= SUMPRODUCT(--(Sheet2!B2:Sheet2!B300="MARKETING"),--(Sheet2!D2:Sheet2!D300="200612"),Sheet2!E2:Sheet2!E300)

This formula works for me as it is but I would like to add more months to 200612. I want this to also be 200701 and 200702. In another cell there will be up to 10 months. Is there a way to do a Vlookup or something that will look up these months in another table, rather than keep typing them out in the formula?? Otherwise my formula will be very long.

So the info looks like this in excel
MARKETING 200612 -10
MARKETING 200701 -25
MARKETING 200708 -50
ECONOMICS 200709 -30

The info goes on and on. The two variables are the MARKETING column and the month column. My problem is that I would like a seperate table that can be the months. So 200612 and 200701 is one table, and 200708 and 200709 is another table. The table changes often so I dont want to mess with the formulas, rather a table.

Select Multiple Sheets And If Value In Cell Is True Then Copy Values In All Sheets And Hardcode Data

Feb 26, 2012

I have a workbook that updates from external source and creates sheets depending on a cell range.

I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets

What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far

I get compile error here ........Sheets(ArrSh(1)).Activate

Also need it to work for all the other rows.

Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate

[Code] ......

Run-time Error '1004' Method 'Add' Of Object ' Sheets' Failed Adding Multiple Sheets

Aug 9, 2007

I have been running a simulation for about 18 hours now and just received:

Run-time error '1004':
Method 'Add' of object ' Sheets' failed

I have been creating new sheets, importing data, pulling some values from the data then deleting the respective sheet. I am using:

The sheet is actually being added to the workbook, seemingly before the error. I resume the code, and a new sheet is placed in the workbook and it errors again. The Debugger stops and highlights on the code above.The sheet count number was 10895 at the error, just as an indicator of how many times the simulation has performed successfully. I am hoping this is something I can fix without having to start over...

Printing Multiple Sheets In Workbook With Hundreds Of Sheets

Feb 18, 2014

I have a work sheet named "Main_List"...In column D starting with "D2" I would like to list worksheets that I would like to have printed via VBA.

The workbook has several hundred worksheets and I would like to list in column D only worksheets that I would like to print with VBA code.

Copy From Multiple Sheets (26), PASTE To 1 Sheet From 26 Sheets

Dec 26, 2009

I have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.

I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.

Running Multiple Modules Across Multiple Workbooks With Multiple Sheets

Feb 19, 2012

I've got data being scraped from a site, putting 1 new workbook in a folder each day

each workbook has 40 sheets in it.

i need to run 5 modules in sequence on a sheet then loop to the next sheet and run the same 5 modules.

ive writen all the modules, and can loop them through the sheets in sequence but i cant work out how to loop them through the each workbook in the folder..

is there an easy way to do this or can it not be done because it would need access to the folder that holds all the wordbooks which lives outside of excel on the desktop ?

Multiple Criteria SUMIF Using Column As Negative Criteria?

Mar 24, 2014

I've attached a sample workbook to show what I am trying to do. I would like the formula to say "if Sheet2!A:A is "MON" and if Sheet2!R:R matches Sheet3!A:A, and if Sheet2!I:I doesn't match any of the values from Sheet1L:L, then I'd like the sum of Sheet2!F:F. It seems pretty simple but I've tried a million different variations of SUMIFS, SUMIF, IF, AND, etc. and I can't figure it out.

Macro For AverageIFS With Multiple Criteria In Same Criteria Range

May 18, 2014

Macro for AverageIFS, with multiple criteria in the same criteria range....

Multiple Criteria Count Between 2 Dates & Other Criteria

Jul 30, 2008

I have a spreadsheet which lists letters issued, the date issued and the potcode. I need a formula that counts, on a weekly basis, the number of letters issued to postcodes in Sutton and Bexley.

I have a count sheet set up on one worksheet and the list of postcodes applicable to each area are listed on another worksheet. I have been playing around with sumif, sumproduct etc, but these don't seem to work as I am pointing the formula to a list of postcodes and not an individual postcode. For example, the formula for one week needs to tell me, the number of letters issed to Sutton between 26/07/08 - 01/08/08. This is what I tried -

=SUMPRODUCT(('MU63 NC'!\$F\$2:\$F\$10>=COUNT!B\$2)*('MU63 NC'!\$F\$2:\$F\$10<=COUNT!B\$3)*('MU63 NC'!\$D\$2:\$D\$10=Sutton!\$A\$2:\$A\$50))

But I get #N/A - if I change the last refernce to a specific cell instead of a range it works, but this will make the process very lengthy as there are lots of postcodes!

Excel 2010 :: Macro To Save Multiple Sheets To Multiple PDF With Cell Value As Filename

May 6, 2014

I would like a macro to be able to save 26 tabs within the one document to individual PDFs.Preferably I would like to be able to specify each time exactly which tabs get printed, because often I don't need to print all 26, just the first 10 or so.I would like each PDF to automatically be named with the value in cell E10 of each tab.E10 already has a formula to create its final value. It references cells from other tabs within the same document. Hopefully the fact that this cell has a formula in it won't affect my ability to use the resulting value as a 'save as' reference?I would like it if the PDFs save to the same location as the Excel sheet from which they're generated is located. The location of the excel sheet will change every three months, so I'd prefer not to specify a location with a specific filepath, as it will have changed by the time I run the macro again.

I am using Excel 2010.

Adding Multiple Cells From Multiple Sheets With Sumif Function

Jan 20, 2009

I'm trying to put together a spreadsheet that tracks disc capacity increases, affected by any incoming projects. I've managed to do so for one project, but would like to for up to 10. The way i've designed the solution (i'm sure there are far more elegant ways, but hey) is thus:

A forecast worksheet keeps track of a grand total, taking information from sheets P1 -> P10 (being projects 1 to 10). I am unable to figure a way to add up all the increases from all 10 project worksheets with one succinct formula. What I use so far is: ='P1'!C83+SUMIF('P1'!E82,"=2009 - Q1",'P1'!D82) ..................

Count Unique Logs With Multiple Conditions Of Multiple Sheets

Oct 8, 2007

I've got no clue about all this, but I've had to get specific formula examples and fill in the blanks in order for my timesheet to work. There's just one final problem if somebody could please help.

This is a timesheet for a 5 day work week. I need to count the number of unique log numbers for a specific activity. The log numbers counted must be unique across the entire week, not just for each day, which means I want the formula to count the unique log numbers across multiple sheets.

The formula also has multiple conditions. I got 2 columns. The first part of the formula needs to verify a word, say, "split" and if it does it checks the adjacent cell for a unique log number. If both arguments are true, it counts the log as 1 unit.

Here is a working formula for only one page.
=COUNT(IF(D4:D29="split",IF(FREQUENCY(C4:C28,C4:C28)>0,1,)))

Here's 2 problems with this formula:
1. I will count if it encounters a blank cell in the Log numbers the first time (which will happen as not every activity we do has a log#), but it will stop counting if it encounters a second blank cell.

2. I don't know how to make it work across several sheets.

This is an alternate formula which works and skips the blank cells, but I don't know how to add the multiple condition of "split" and to have it work across multiple sheets. I just copied it Microsoft. As I said, I don't understand it, I just fill in the blanks.

SUM(IF(FREQUENCY(IF(LEN(C4:C29)>0,MATCH(C4:C29,C4:C29,0),""), IF(LEN(C4:C29)>0,MATCH(C4:C29,C4:C29,0),""))>0,1))

Copy Multiple Ranges From Multiple Sheets And Paste In Order Via VBA

Apr 21, 2013

I've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:

It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.

I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.

If Worksheets("Sheet1").Visible = True Then
Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"),
Sheets("Sheet1").Range("C7").End(xlDown)).Copy
Sheets("Sheet8").Range("A5").End(xlDown)
End If

[Code]...

Finding Multiple Values For Specific Individual Through Multiple Sheets

Jan 5, 2014

I am working with a nonprofit to set up their financial ledgers. There is one workbook with 12 sheets, one for each month. The goal is to be able to set up a formula that searches through all 12 sheets for every donation that a specific individual has made. For instance, let's say that John Smith gave x amount of money on 1/1/2000, y amount of money on 1/10/2000, and z amount of money on 2/2/2000. This data will appear on 2 different worksheets. I have the following formula, which allows me to look through one sheet at a time:

{=INDEX(Jan!\$B:\$B,SMALL(IF(Jan!\$A:\$A=Smith!\$A\$2,ROW(Jan!\$A:\$A)),ROW(1:1)))}

Where Column A in each sheet is individual name, and column B is amount donated. Sheet "Jan" is the data for the month of January, and sheet "Smith" is the culmination of John Smith's donations for the full year. Using this array function, I am able to retrieve all data for John Smith in the month of January, but I can't find a way to make one function that searches for all of John Smith's donations in each month. Is there a way to build an array function in VBA that would accomplish this?

Combine Workbooks With Multiple Sheets Into 1 Multiple Sheet Workbook

Mar 16, 2008

I have about 20 workbooks with different file names for different projects all saved in the same folder. Each workbook has about 10 worksheets and each worksheet is named in a similar fashion in each of the 20 workbooks (eg. revenue, cost, variance etc.). I want to pull out a worksheet named ' forecast' from each workbook into a master workbook so that the master workbook would contain the 20 forecast worksheets.

Multiple Options Cell Values Based On Multiple Criteria Variable Inputs?

Mar 18, 2013

I maintain the data flow at my work. We send and receive the data using excel files with specific formatting that I then upload to the database. Each time I send or receive the excel file I must log them, this is what my code question refers to.

I use RDBMerge to merge all the contents of the 100 plus excel files into one worksheet. The first part of the macro cleans up the merge data for use in the log (i have attached an example of the clean data and finished log).

The blue shaded area of the "Raw_Data" is what the clean data looks like, the yellow column is what current macro records for each record.

As you can see by the example the Raw_Data is only two files LL_LLL_BOB_ToLLLLL_20121228_01 & LL_LLL_BOB_ToLLLLL_20121230_01, each with more that one record.

The log code in column "H" Is based on this criteria:
First Letter of the Unique ID in column "E" - O, M, or L
Program Type in Column "F" - U or R
1. O-U = U
2. O-R = RU
3. M-U = U2
4. M-R = R2U
5. L-R = R

You will note that Columns G-R of the "Log Sheet" correspond to the "Record Type" found in Column "G" of the "Raw_Data" sheet.

This is the area where my skill at using scripting dictionaries fails.

The results for the log list each file only once, but the log code for each corresponding "Record Type" in columns G-R of the "Log Sheet" must contain each unique instance of the code. In other words

if LL_LLL_BOB_ToLLLLL_20121228_01 contains an O-U with an "A" Record Type and an M-R with an "A" Record Type; then, on the log sheet there needs to be the codes "U/R2U" in the cell intersection of the LL_LLL_BOB_ToLLLLL_20121228_01 record row and "A" column (which is column "G")

So, If the File contains one of each code for each Record Type the corresponding cell must house one of each code separated by a "/" without any spaces. This means the cell value could no code, or one code and all the variations in between to all five codes. Also, for ease of human reading the log codes should be concatenated in the 1-5 order that I listed them in (U/RU/U2/R2U/R)

Here is my code so far.

VB:
Option Explicit
Sub test()
Dim dic As Object, a, i As Long, rng As Range, e, w, n As Long
Set dic = CreateObject("Scripting.Dictionary")

[Code].....

Pull Data From Multiple Cells And Concatenate In Single Cell Using Multiple Criteria

Aug 31, 2012

I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:

TABLE 1:

Project
Benefit Type
Delivered or Enabled
Benefit

PJ1
Financial
Delivered
Saving of \$4M over 24 months.

[code]....

I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.

TABLE 2:

Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled

[code]....

So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:

Continued maintenance of hardware.

Increased capacity.

Send Multiple Files Based On Criteria To Multiple Email Addresses?

Jun 29, 2014

I have a directory which contains many files, they are all names based on their locations. eg. Burwood-File1.xls,Burwood-File2.xls,Burwood-File3.xls etc

I have a master that which will contain the branch in the first column.

I have defined the directory location in a separate sheet as well as email template.

When I click on the Send Email button I want ti to attach the files that match the Branch name.

The Branch list will constantly grow.

Populating Fields In Multiple Cells Based On Criteria In Multiple Columns?

Feb 24, 2014

Im struggling to find a formula to populate cells based on values to be checked in two fields (ICODE, COMPANY) as shown below.

In the example here, all records where ever the ICODE = 49, i need to populate the fields(columns) AD1,AD2,AD3 or AD4 with the product name of the same company where the ICODE <> 49. There could be between 1-7 products per company.

CURRENT SHEET