In Cells B4:B13 I have a guests name
In Cells C4:C13 I have the guests arrival date
In Cells D4:D13 I have the number of days the guest will be in the hotel
In Cells E4:E 13 I have the guests departure date
Is there I can use a contif or sumeif or some other formula to give me a sum of guests in the hotel between two dates and on a given date?
I can generate from my hotel software a list that includes the check in and checkout date for a room- and the number of nights for the stay, and the total dollar amount of that stay. if anyone is willing to look what I have so far, I am attaching the smallest sample set of data I can generate and have it useful
and I have succeded in using vlookup succesfully to transfer the net room amount onto the first night of each stay on the grid.
worksheet "export tape chart" is the data generated by my hotel software-
(except for Col a-- I use this for my two way vlookup match)
I can reorder the output as needed for vlookups & offsets
worksheet "first night rate total NA" is where I have pulled the total room rate into the first night of the stay in a grid
worksheet "first night rate total clean" is just a simple cleanup of the first pulling for iserror.........
heres the data: [url]
Im meant to produce a simple spreadsheet that calculates the floor area of a new build city centre hotel. The developer is looking at various plots of land that allow differing sizes of floor plates and storey heights. The key variables are the number and type of bedrooms, number of floors and whether the hotel is classed as a premium or budget hotel.
I need to produce a spreadsheet that shows the key variables and the total calculated floor area at the top of the sheet.
when the largest number in column B the hotel in column A should be in bold.
So in excel language IF(Number in B Is Max display corresponding hotel in column A as BOLD. But I can't figure out how to do this.
You can see here on the image:
additionalimage.gif
First and foremost I would like to congragulate you on this wondeful piece of code in the below link...
The query was to get a future date excluding Fridays and Holidays...
http://www.excelforum.com/excel-work...rkingdays.html
I have a similar query and therefore I pasted this link...
I actually wanted to get a future date using a Dynamic two day off as my the offs keep on changing as well as incorporate Holidays and Leaves if any..
Now Holidays would be official Public Holidays and
Leaves would be taken by the employee..
The code needs to pick the Leaves + Holidays and different offs maybe even more than 2 offs...
I have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
I am now trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 1 Replies View RelatedI'm trying to workout how to take a known initial date a repeating frequency and work out the next due date from today.
Example
Initial Date :- 1st of January 2014
Frequency :- every 5 weeks
Current Date :- 9th of March 2014
Next Due date should be :-12th of March 2014 (if I worked it out correctly from my paper calendar)
I want to use a cell formula to do this for different initial dates and varying frequency periods (the frequency will always be whole weeks i.e. 1,2,3,4,5,6,7,8,8,10)
I need to create formulas that reference a single date and output date ranges. The objective is to have a person input a Monday date in any given month and receive a four weeks out worth of dates and ranges. For example: In a lone cell, the person inputs 10/13/08. Automatically, the sheet produces the next full week range: October 19 – October 25 in a single cell and also produces a cell for each date. Example: Sunday 19, Monday 20, Tuesday 21, etc…. It should look like:
Monday Date:
10/13/08
October 19 – October 25
Sunday 19
Monday 20
Tuesday 21
Wednesday 22
Thursday 23
Friday 24
Saturday 25
and then repeat for three more weeks. I thought I had it figured out until the month changed. The dates continued in October instead of adding a month. This report will be ran weekly, so simply adding a +1MONTH to some cells will not benefit me as I’ll have to change the formula every week. I want the formula to compute the data without any manipulation over the next several years. The only change will be the Monday date.
I have data going in to a small table which has some empty rows as that data is not yet available... My problem is, I need to sort this table in date order but with the date nearest to today's date at the top...
The sort function puts oldest at the top or oldest at the bottom which is no good for what I need...
I use xl 2003.
i have several styles to handle mentioned under different rows separately.
all the styles have their various raw materials inward date mentioned under different column of their respective rows from column Q to Y
now i need to 1. extract the latest date of any particular raw material which can be in any of column from Q to y columns ACCORDING TO DIFFERENT STYLES IN A Particular row automatically that is AC
i would like to use the formula "now()" to establish a date in a document. is it possible to lock this date to the initial date? (so when the document is created the date won't change the next day)
View 2 Replies View RelatedI need an IF formula, that states if a date is more than a month after the date in the cell then it is timely and if it isn't then it is not timely. For example the date in A1 is 12/11/05, if the cell is A2 is 13/12/05 (or any date after that) then A3 should read Not Timely, if A2 is 12/12/05 (or any date before that, including a date before the date in A1) then A3 should read Timely. Is there any way to do this?? At the moment I am having to go through manually and put in either Timely or Not Timely.
View 2 Replies View RelatedI need to compare the date from the user input and the date listed on excel. How can I compare it? Is it correct? lngCmp = Val( Cells(I, 31))
Dim lngBegin As Long, lngEnd As Long, lngCmp As Date, lngResults As Long
lngBegin = 9 'beggining of data
lngEnd = 232 'end of data
lngCmp = InputBox("Please enter the date", "Begining of the week")
Lngcmp1 = DateAdd("d", 1, lngCmp)
lngCmp2 = DateAdd("d", 2, lngCmp)
lngCmp3 = DateAdd("d", 3, lngCmp)
lngCmp4 = DateAdd("d", 4, lngCmp)
lngCmp5 = DateAdd("d", 5, lngCmp)
'lngCmp1 = lngCmp + 1
'lngCmp2 = lngCmp + 2
'lngCmp3 = lngCmp + 3
'lngCmp4 = lngCmp + 4
'lngCmp5 = lngCmp + 5
lngResults = 0
lngResults1 = 0
lngResults2 = 0..................................
I have to excel files
1. Temperature & Humidity Reading
2. Summary
I tried to copy a date from Temperature & Humidity Reading file using the formula ='[Temperature & Humidity Reading.xlsx]Sensor 7'!$C$2 to Summary file
if the date format is like this 6/10/2013 12:00:00 AM the result is fine, but when i try to copy that formula for the succeeding dates the results is same from what i copied.
I have a workbook that I'm using to tracking staffing patterns within a mental health agency. When the workbook opens the user is asked to pick a date range and an office location. I've placed code into the userform that pre-fills the "start date" with today's date and the "end date" 7 days from today's date. I would like the user to be able to enter a unique date range should they wish but I have yet to figure out the coding to accomplish my goal.
[Code] .....
Attached File : Staffing Report 1.90.xlsm‎
I have userform with date pickers and have text boxes overlaid on these, when I select todays date from the date picker it does not display the current date in the text box (I have 8 date pickers on the userform). If I select another date then reselect the current date it works. It has occasionally worked but why.
Below is the code for populating the text box from the Date Picker.
Private Sub DTPicker1_Change()
TextBox1.Value = DTPicker1.Value
End Sub
The initialize userform code uses the following to format and set the textbox
Code:
TextBox1.Value = Format(Date, "dd-mmm-yy")
TextBox1.Value = ""
Windows 7 with Excel 2010
In column A, I have dates; In column b i have security levels. I have made a table called "Security" it contains to columns, a list of security levels and no of years when each security level is required to be reviewed. the table is setup -
d1 e1
Restricted 5
etc
Example of data
ie.
a1 b1 c1
Restricted 1/06/2012 1/06/2017
What I am looking for is a formula to look up a1 "restricted". then lookup the security table and find "restricted" its value is 5 (years) then add the 5 years to date in b1, but place it in c1.
I am trying to create a calculator which will show start date and end date based on the specific date provided.
EX: column A has January 1, 2013, column B has Wednesday, Column C should have a start date which supposed to be 4 days ago (December 28).
I needs a formula (not VBA) to calculate the required start date.
I have to do a job of 14 working hours and this job must be finished on 05-may-2014 13:00
My working week is from monday u/i friday and every day I work from 08:00-16:00
At what time do I have to start the job to get it done in time.
The formula should give this result: 01-may-2014 15:00
I have a list of ID# (Col A) and dates (Col B). The ID # of reference is Col (F) and today's date (Col G). I need to count how many future dates there are in the list (Col B) that are unique and in the future from today's date.
I'm still fairly new to all these formulas and functions which is why I'm not attempting this in VBA.
I've attached an example work book and I would like the result in H2.
Example Workbook.xlsx‎
I am trying to get the results of the number of days between today and a future date. I am using ="cell containing futuredate"-today() and it gets me the correct number of days. The problem comes in when I have yet to populate the future dates. I am getting -39991 (numeric value between today and jan 01 01) and because I am also using conditional formatting this is even more of a problem. Is there a way get excel to display nothing if it is a negative number? or to give a specified resut if the number becomes negative such as Expired or something of that nature?
View 3 Replies View RelatedI need a formula that will calculate the number of days from a date entered into cell A1 to today's date. Whether it's before or after todays date. Example:
5/10/2009 to today is -9
5/22/2009 to today is 3
how can i count the positive days to a inserted date value or the past days (negative value) to the system date (today).
View 5 Replies View RelatedI have a spreadsheet where we will be inserting the Arabic Hijri date taken from a Customs document (bayan). On my spreadsheet I'd like to have a column immediately next to the Hijri date that would convert the Hijri date to the Gregorian date so both dates will be visible for our Arabic and Western personnel who will be using the spreadsheet.
I am using Microsoft Excel 2010.
Trying to do a linkback from another post located here but not having much luck doing it: [URL]
I'm working with 2 date columns and trying to filter a view to only include projects with dates within 3 months of today's date.
I've attached a current working file of the data and the end result i'm hoping to achieve via a macro of some sort.
I've manually got it to work via formula by inserting 2 additional columns (highlighted yellow) which determine if the dates "YES" fall in this 3 month time frame of "" blank if not.
create a macro which does all of this automatically without modifying any columns if this is possible
I have a worksheet that has a sent date and expected delivery date I need create a macro that will alert me if today's date is within 5 days of expected delivery date.
View 14 Replies View RelatedI have two columns of dates, leave start and end dates (when people start leave i.e. annual leave). Would need to introduce column(s) to calculate how many days fell within the month including the end date and excludes weekends.
For example, if the staff on leave from 31st March to 6 April, i need to show that the number of leave taken as 1 day in March and 4 days in April.
I have a input box that prompts a user to enter a date of a new month - it has to be the 1st of a new month. I have validation that it is a date that has been entered but then i want to validate the date entered is a month ahead of a date in a cell range on a sheet.
It is a monthly reset so it has to roll on from the previous month.
Here is what i have currently but it isn't working.
Code:
' Get user to input the first day of the new month to populate all dates with
dNewMonth = InputBox(Prompt:="Enter first Day of the new Month. Must be the 1st of the Month e.g. 01/10/2012", _
Title:="Enter Date")
' Validates the entered date is a valid date
If (IsDate(dNewMonth) = False) Then
[Code]...
Extract data with differing date formats that I need to convert to something consistent that I can format as a date.
This is an example of data.... all with general format at the moment.
2/28/2013 2:48:53 PM
1/16/2013 10:48:50 AM
12/17/2012 11:59:49 AM
I have used this formula to extract the date portion, but I can't get this to then format as date. How do I convert this to the julian date, so I can then apply a date format?
=LEFT(G9,SEARCH("/",G9)+7)
(The day portion of this date always has a leading zero).