This piece of code gives me Type Mismatch Error:
txt1NegShunt = txt1NegShunt & Join(.Transpose(.Transpose(myRecord.Resize(, 1).Value)), Chr(44)
Basicaly, I am trying to resize myRecord to only one column. The problem is Resize(, 1).
If I put 2 instead of 1 so that it looks like Resize(, 2) everything works fine. However in that case I get two columns selected.
How to select only one?
I'm trying to write a Macro that, in the active sheet (which contains plenty of data), deletes rows according to several criteria, for example:
- if cell(i, ar1(j)) = ERROR, delete row i and shift 1 up
(ar1 is an array of column numbers)
- if cell(i, ar3(j)) = 0, delete row i and shift 1 up
(ar3 is another array of column numbers)
Etc.
The problem is that, when I run it, I get a "Type Mismatch" error message, and I don't understand why. Here is the
Sub Delete_invalid_rows()
Dim i%, j%
Dim Nr%, valid As Boolean, BYPdata As Boolean
Dim ar1, ar2, ar3, ar4 As Variant
Nr = 1379
ar1 = Array(11, 14, 19, 20, 22, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 64, 65, 66, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 104, 106, 107, 109, 112, 116, 126, 127, 128, 129, 131, 133, 134, 135, 136, 137, 138, 139, 140, 142, 143, 145)..............
OK, so I have a userform with some text boxes that I have specially formatted to accept only date values in the form of mm/dd/yy. By default they are blank. I have a check in one of my codes that looks like this
Code:
If DateBox vbNullString And DateValue(DateBox) > checkdate Then
M1 = "NEOPRENE" & Chr(13)
Else
M1 = "" & Chr(13)
End If
Where DateBox is this specially formatted TextBox and checkdate is a future date being checked against.So if DateBox has a value in it AND that value is greater than the date being checked against the returend string is Neoprene, otherwise it is blank.
Well the problem I have is when the first condition returns FALSE, i.e. when DateBox is empty, the DateValue half still gets evaluated and returns a type missmatch error or something like that because DateValue("") returns an error. I have line of code 8 times, one for Neoprene, squeegee, etc. So the name of the text boxes are each unique and I am using M1, M2, M3, etc.
For other reasons, use of "On Error Resume Next" doesn't work for this situation because it causes a result opposite to what I want to happen.
I am getting error Type mismatch error the moment i enter value in Cell T54 and CLICK "DAILY" on Daily button.Waiting for the solution.
I am attaching the file.
I'm trying to write a pretty simple macro which invokes a built-in DDE function to retrieve some data, then when the data is retrieved, just show a msgbox. When the data is finished being retrieved, cell(20,11) in the sheet "Historical Data" will automatically have "FINISHED" placed in it. So while the retrieval is taking place, I'm simply looping and checking the contents of this cell waiting for it to read "FINISHED". My problem is the 'Do While Sheets("Historical Data").Cells(20, 11) <> "FINISHED"' line generates a "Type Mismatch Runtime Error 13", which I can't for the life of me understand why.
View 2 Replies View RelatedI am using this code:
Code:
With wshvar
.Range("A16") = Application.Index(wshcore.Range("A:A"), Application.Match(.Range("A17"), wshcore.Range("A:A"), 0) - 1)
.Range("A18") = Application.Index(wshcore.Range("A:A"), Application.Match(.Range("A17"), wshcore.Range("A:A"), 0) + 1)
End With
but receiving a 'Type mismatch' error with the highlighted code.
I have a piece of VBA code that acts weird. For brevity I am doing a function call like this:
val=MyFunc( [D1] )
and
Function MyFunc(mean As Double)
D1 is a named range which is a single cell. It contains a double.
The problem occurs when the value is zero, I get a type mismatch on the function call. If it is non-zero all is well.
What would cause this? I could see if zero was invalid inside MyFunc() that some calculation might blow, but it nevers gets into the function. Looks like the compiler is stopping it.
When I run the following code I get a (Run-Time error '13': Type mismatch). When I click debug it highlights line 41
[Code].....
i have written a vba code to open excel file saved at network server. The issue is code opens the file but gives "Runtime Error 13 Type mismatch"
Code :
<code>
Sub test_opening()
Dim filepath As String, filename As String, completename As String
Dim hurray_macros As Workbooks
[Code].....
I seem to have some type mismatch in my macro...
The error appears every time i insert or delete a row in the worksheet.
This is the ....
I have attached a sample file for you to easy reference. So when the code run until the loop function, it will prompt an error message.
The idea is to open the selected file and the copy the data from the selected to this master file by searching the column A. Column A has the identical text in all the files that are to be copied from.
I am trying to only have the option 1, 2, or 3 be entered. I have that part down, but if someone clicks cancel or just closes the input box i get the type mismatch I believe because no integer was found....is there a way around this?
Dim intResponse As Integer
intResponse = InputBox("Choose One" & Chr(10) & Chr(10) & "1 - Lease Lock" & Chr(10) & "2 - Upgrade" & Chr(10) & "3 - Lease Lock & Upgrade", "Contract(s) sent out")
If inResponse <> 1 Or strResponse <> 2 Or strResponse <> 3 Then
MsgBox "Must choose (1,2,3)"
Exit Sub
End If
I have built a user defined function called: portAlpha.
Code:
Function portAlpha(assetCode As String, indexCode As String) As Double
Dim assetCol As Long
Dim indexCol As Long
Dim assetData As Range
Dim indexData As Range
With Sheets("Data")
[Code] ......
I am struggling to get this to work though. Everytime I step over this piece of code:
Code:
portAlpha = Application.WorksheetFunction.LinEst(Range("M4:M63"), Range("N4:N63"), 1, 1)
I get a "Type Mismatch Error". All the values in the range are numbers, and LINEST should return a double, so I am puzzled as to why there is a mismatch...
I have hardcoded the range into the formula just to try and get it to work. Eventually this will be two variables and will look like this:
Code:
portAlpha = Application.WorksheetFunction.Index(Application.WorksheetFunction.LinEst(assetData, indexData, 1, 1),1, 1)
I have a bug that pops on when running this line of code and I think it's because the copy area is a miss match against each worksheet.
If Evaluate("COUNTIF(" & sh2.Name & "!C:C,""" & sh1.Cells(i, "C").Value & """)=0") Then sh1.Rows(i).Copy sh2.Rows(j)
Sub Copy()
[Code].....
I am trying to get the row number of the row containing the value in AO1 in column A.
Code:
with wshgroup
mrow = Application.Match(.Range("AO1"), "A:A", 0)
end with
I'm getting a type mismatch error.
I am using the code below but it is coming up with a type mismatch error message and I'm not sure why? how I can stop this?
Sub PhilsCode2()
Range("A3:AE382").Select
Selection.Interior.ColorIndex = xlNone
Selection.Font.ColorIndex = 0
Selection.Font.Bold = True
Selection.Font.Bold = False
Range("A3").Select
Dim myRow As Long
Dim myValue As String
myOverall = 31
myGoalsCol = 14
myRow = 3
I keep getting this run time error when ever i edit cell on the worksheet that contains the following code. The italicized line is the culprit according tp the debug feature:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "I10" And Target.Value "O5:O9" Then
ActiveSheet.Unprotect ("password")
Rows("29:46").EntireRow.Hidden = True
Select Case Target.Value
Case "DEALER1"
Rows("29:32").EntireRow.Hidden = False
Case "VENDOR"
Rows("29:39").EntireRow.Hidden = False
Case "LQ"
Rows("29:39").EntireRow.Hidden = False
Case "78620"
Rows("29:46").EntireRow.Hidden = False
Case Else
Rows("29:46").EntireRow.Hidden = True
ActiveSheet.Protect ("password")
End Select
End If
End Sub
This code came from the book, “VBA for Excel Made Simple” that I borrowed from the library. When I run the code, I keep getting the error message: Run-time error '13': Type mismatch.
The purpose of this form is to insert an extra row and add the representative name in the Rep Name list.
I have also attached the sample excel file and the explanation that came from the actual book.
Private Sub UserForm_Initialize()
RepBox = ""
SalesBox = "0"
For Each Cell In Range("rep_name")
RepList.AddItem Cell.Value
Next
End Sub
Private Sub AddButton_Click()
RepBox.SetFocus
With RepBox
If .Value = "" Then
MsgBox "Enter a name for the rep to be added"
.SetFocus
End If.............................
I can't understand why I am getting the above message on the code below. I have used it before in other spreadsheets with the same type of data.
Basically the macro should trim the data and get rid of any numbers at the start of the data (the data sometime has just a name other times it has a number then a name). In this case the data has 154 before the name. I am getting the above message on the section in Bold. As l is a string I would have though it could take both text and numbers. I have also tried it with Variant as the type and got the same result. I also dont't undertand why the error happens at this point rather than when Ls value is first determined.
Dim lastrowdatab, i As Long
Dim j, l As String
lastrowdatab = Cells(Rows.Count, 1).End(xlUp).Row
For i = 4 To lastrowdatab
j = WorksheetFunction.Trim(Cells(i, 29))
Cells(i, 29).Value = WorksheetFunction.Proper(j)
I am dimensioning my variable as a Date, which it is! But I keep getting this error.
Public TargetRow As Integer
Sub InitializeTargetRow()
TargetRow = 4
End Sub
'''''''''''''''''''''''''''''
' ColorIndex 43 is GREEN '
' ColorIndex 3 is RED '
' ColorIndex 6 is YELLOW '
' ColorIndex -4142 is NONE '
'''''''''''''''''''''''''''''
Sub HighlightRow()
Application.ScreenUpdating = False
Application.EnableEvents = False
Application.Calculation = xlCalculationManual..................
I'm using this code to automatically change the format in column B and C depending on the currency selected in the corresponding cell in column A. USD, STERLING and EURO are custom styles I have created.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column = 1 Then
If Target.Value = "USD" Then Target.Offset(0, 1).Style = "USD"
If Target.Value = "USD" Then Target.Offset(0, 2).Style = "USD"
If Target.Value = "STERLING" Then Target.Offset(0, 1).Style = "STERLING"
If Target.Value = "STERLING" Then Target.Offset(0, 2).Style = "STERLING"
If Target.Value = "EURO" Then Target.Offset(0, 1).Style = "EURO"
End If
If Target.Value = "EURO" Then Target.Offset(0, 2).Style = "EURO"
End If
End Sub
I assume there is a better way to write this code but I can't do any coding, just copied it from the help I received Automatically change currency format.
Anyway, when editing more than one cell in column A, for example selecting two cells and pressing delete, I get the following error:
Runtime error nr 13: Type mismatch
(I think that is the correct translation from Swedish: "Körfel nr 13: Inkompatibla typer")
if there is any thing need to corrected please let me know i have read rules and tried to comply all
here is my question
I m receiving runt time error 13 type mismatch and could not resolve it till now. if some body can look into it and kindkly give some suggestions
Sub LineHours_Calc()
Dim itms As Integer
Dim qnty As Integer
Dim upt As Integer
Dim get1 As Integer
Dim get2 As Integer
Dim get3 As Integer
Dim get4 As Integer
Dim chg1 As Integer
Dim chg2 As Integer
Dim co As Integer
Dim lhc1 As Integer
Dim itm As Integer
error is in 3rd line in the inner for loop i pasted the line here as well (qnty = WorksheetFunction.Index(Range("board!$B$3:board!$DZ$500"), get1, get2)
I have a excel workbook with sheet1 & mastersheet
in Master sheet i have defined values in list Column D & F
Column D has COUNTRY as heading and country Names below it
Column F has CITY and city list
I am column A i have 2 data list
as
COUNTRY
CITY
I have dropdown in excel sheet (SHEET1) in Column K populated with data from MASTER in Column A ie city & country
When I select city i need Dropdown in column L to be populated with Citylist from MASTERS COLUMN F and if city seleced i need to get data from column D
But I get type mismatch error.
I am attempting to concatenate several columns and I am getting the Type Mismatch error. I understand why I am getting this error, but I do not know any other way to accomplish what I am seeking.
[Code] ......
I am getting a mismatch error on arrow pointed below. whenever a entered is then deleted in the cells i.e. H50 and H51. I've included the workbook here just in case.
Is there a way to ignore error message so that it does not to show up??
What is the quickest/best way to find out exactly what is causing a Type 13 Mismatch error?
Debugging with F8 is taking forever as I have to go through loops that go through 6000+ rows each...
The sub needs to do the following:
Needs to automatically check user-entered values in column F. If the value is greater than 0, it needs to multiply that value by -1. If the value is negative, or the cell is empty, it needs to do nothing.
I keep getting runtime errors about type mismatch.
Please look at my workbook and tell me where I'm going wrong.
I am getting a Type Mismatch Error when I run the following code.
I need to have the name save as
06-01-2012 dispositions.xlsx
in a specific location that is in this line of code. When i have it put 'dispositions' first, it works, but i need the date to show first in the name. Am I missing an additional function or quotes?
HTML Code:
ActiveWorkbook.SaveAs Filename:="C:DataSales TeamReview DatabseDispositions" & Year(Date) & "" & MonthName(Month(Date)) Format(ActiveSheet.Range("H1"), "mm-dd-yyyy") & "dispositions.xlsx", FileFormat:=51
The code I'm using is as follows:
Private Sub CommandButton1_Click()
DrugUserForm.Show
End Sub
Sometimes it works; sometimes it produces a Run-tine '13' error. Type mismatch.
I went to rerun an old macro that i ran fine before and it is now working not so fine and was wondering if anyone could lend me a hand in figuring it out because i know it's something stupid and simple.
this code
Workbooks("SUMMARY OF LSC.xls").Activate
Sheets("FACILITY DATA IN EUR").Select
For i = 2 To lastrowA
Sheets("FACILITY DATA IN EUR").Select
If Range("F" & i & "").Value = "Y" And Range("AR" & i & "").Value <> 0 Then
Sheets("FACILITY DATA IN EUR").Range("A" & i).Copy
Sheets(" lookups").Select
Sheets("lookups").Range("A" & lastrow1 + 1).Select
ActiveSheet.Paste
Sheets("lookups").Range("E" & lastrow2 + 1).Select
is giving me a Run-time error '13': Type mismatch and i have no idea why it would be. any suggestions? the variables are set to double.
the values in column F is either Y or N and in column AR is either 0.00 or a number like 11111.11.