VBA - Run Macro If Worksheet Changes

Aug 13, 2013

I have attached the file and its pretty simple what I am trying to do if you inspect the sheet. I just want to record the random number in C3 as I change the time value.

VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Application.EnableEvents = False
If Range("G3").Value < 1000 And Range("C1").Value > 0 Then
Range("C8") = Range("C8") + 1
Range("E8").Offset(Range("C8").Value, 0) = Range("C3")
End If
Application.EnableEvents = True
End Sub

RefreshMacro.xlsm

View 1 Replies


ADVERTISEMENT

Worksheet_change: Macro In One Worksheet To Run When Any Cell (in A Given Range)on A Different Worksheet (dataentry) Is Updated

Mar 27, 2007

I want a macro in one worksheet to run when any cell (in a given range)on a different worksheet (dataentry) is updated. I have spent along time trying to make it work with no avail. The code I use to start my macro is as follows.

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count <> 1 Then Exit Sub

If Target(1, 1).Address = "dataentry!H5:IV72" Then
If Not Intersect(Target(1, 1), Range("dataentry!H5:IV72")) Is Nothing Then

On Error Resume Next
Application.EnableEvents = False

View 7 Replies View Related

Macro Which Saves Data From Temp Worksheet To Customers Worksheet?

Mar 17, 2013

Dropbox - Final.xlsm

Here is the above link. Am looking at a button which saves whatever is the temp worksheet row in the customers worksheet. The temp worksheet basically takes the data from the Quotations worksheet and places it in a row.

View 9 Replies View Related

Macro To Copy Six Specific Columns From One Worksheet To Another Worksheet

May 12, 2008

What I am trying to do is to write a macro that will automatically copy six columns from worksheet (Sheet 1) to another worksheet (Sheet 2). i.e. ‘Description of Project’, ‘WBS Code’, ‘Rate’, ‘Employee Name’, ‘Premium’, ‘Invoice’, ‘Status’, ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ from Worksheet (from Sheet 1 to Sheet 2)

The problem arises as I know the names of the columns to be copied in Sheet 1 (as details above) but they can be in any order in sheet 1.

In additional the columns ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ are total columns so when they are copied from ‘Sheet 1’ to ‘Sheet 2’ their values should be copied as opposed to the formulas

View 9 Replies View Related

MAcro To Copy Worksheet And Worksheet Events

Jul 26, 2009

I have a worksheet that utilizes a Worksheet Change Event. I created a macro to copy the sheet and that works fine except for the fact that it doesn't contain the Worksheet Change event.

View 5 Replies View Related

Macro - Delete Row From Worksheet 1 And Add To Worksheet 2

Jun 28, 2007

I am maintaining an issues list in excel. File contains two worksheets/tabs: 1) Open Issues & 2)Closed Issues

One of the columns is Status. When an issues is in 'Complete' status, it is removed from Open Issues and added onto the 'Closed Issues' worksheet.

There are many issues closed daily and its quite a manual task to individually delete rows in one sheet and paste them at the end of the last row in the other sheet. Want to have a button/macro that would find any rows that have the cell for the status column w/ value 'Complete', delete it from 'Open Issues' sheet, and append it to the 'Closed Issues' shseet.

ive done basic c++ programing years ago, but know nothing about vba or excel macros.

View 13 Replies View Related

Worksheet Change Macro Takes Too Much Time When Run With Update List Macro

Feb 1, 2009

I have a worksheet in which I have a worksheet_change macro. This worksheet_change macro makes sure that a few cells will keep their colors, even if the user copies and pastes a new value to that cell. This worksheet_change macro runs each time there is a change on the worksheet. Now my problem is that on the same sheet I have an update list macro which updates around 20.000 rows and two columns (which is alltogether around 40.000 values) and it takes a while to run. So.. it takes a loooooooooot of time (too much) when these two macros both run.

My question is that can I somehow disable the worksheet_change macro while the update list macro runs. I mean something like when I start the update list macro to disable worksheet_change macro and when the update list macro finishes, then reenable worksheet_change macro?

View 5 Replies View Related

Macro SortWorksheets Stopped By Each Worksheet Until The Macro Is Ended

Dec 26, 2006

I have in my Workbook_open a macro,called Workbook_SheetActivate
with a line : Msgbox ActiveSheet.Name ....

In a sheet I have a macro SortWorksheets ....

My problem is , when I run the macro SortWorksheets it always stopped
by each worksheet until the macro is ended, this because the macro by opening workbook.

How can I make the macro SortWorksheet in one run?

View 9 Replies View Related

Macro - Row Search Macro In Worksheet

Oct 30, 2007

to write a Macro which will be able to read a numeric value in a cell and find the equivalent of the row number in the sheet.

For instance, if I type "12" in cell A1, the marco will be able read cell A1, goto and highlight Row 12 of the same work sheet.

View 9 Replies View Related

Macro To Add Worksheet

May 18, 2009

I'm looking for a macro that will insert/add a new worksheet, and then move that newly created worksheet to the end of the workbook. Sounds simple but I can't figure out how to do it.

View 8 Replies View Related

VBA / Macro For Worksheet

Aug 21, 2014

I am trying to work out a formula for the following task,

I have a worksheet that has a number in row B11 to IQ11, all with different values, that auto sum in B13. I wish to manually add a date to B12 to IQ12 which in turn removes number from cell above in row B11 to IQ11 and auto sums in B14 .This will then zero the individual cell and reduce sum in B13

I have attached a couple of screen shots

excell after.PNGā€ˇ
excell before.PNGā€ˇ

View 1 Replies View Related

Worksheet Macro

Jul 15, 2007

I need it to be able to complete the following task in a workbook. I have a main sheet with data, and I need to be able to assign a word or numerical to say column "H", and it would take the information in that row and create another worksheet named the same as information in "H". And everything with the same "H" would combine to that particular worksheet.

I attached a file, excel.jpg as an example.

View 14 Replies View Related

Macro To Go To A Worksheet

Jul 17, 2006

So far I have been writing macro codes to open a workbook and used hyperlinks to go to a particular worksheet. Is there a way to use a command button to go from one worksheet in the workbook to another worksheet in the same workbook?!!

View 2 Replies View Related

Macro: Go To A1 On Worksheet

Dec 6, 2006

I have a sheet with a button that, when clicked, opens a workbook and shows sheet1. The problem is that it shows the sheet in whatever state it was saved in last. I need to be able to write some code that sets the view to the top of the sheet and left of the sheet.

View 3 Replies View Related

How To Run Macro In Protected Worksheet

Mar 25, 2014

I want to run a macro in a worksheet which is proteced.

It's a simple macro which erases the content in (some) cells, nothing more. Even those celles are formatted as unlocked the macro fails.

View 4 Replies View Related

Worksheet Combining Macro

Jun 28, 2007

I'm trying to write a macro that selects file A, copy some particular columns in file A, copy them into a new workbook, then repeat the process for file B, and copy and paste the columns into the same working workbook. Does anyone have any suggestions on using any one of the workbook, worksheet functions to do so?

View 9 Replies View Related

Update Of Worksheet Using Macro

Mar 5, 2008

I need to be able to open a workbook named "Cost Price List" and press an update button which will open Another workbook called "Numerical Pricelist" that will then look up the part number of the item and change the corresponding description only, using the "Numerical Pricelist as the correct master document. There are approx 5000 part Numbers but i have cut a small sample section.

View 9 Replies View Related

Select Which Worksheet To Run Macro On...

Nov 19, 2008

I think this may be a little difficult (for me at least!) but would it be possible to have a list of the open workbooks popup when I run my macro, so that I may select which workbook to run it on?

The macro itself just does some formatting of the sheet, but it is contained in a master file.

View 5 Replies View Related

Macro To Jump To A Worksheet

Mar 18, 2009

I am looking to create a macro, so from a drop down list the value chosen, the work book will open that sheet.

worksheets listed in the drop down list and then on the open sheet a back button back to the startpage.

View 6 Replies View Related

Macro For Button On Worksheet

Apr 6, 2009

I am trying to make a button that puts the formula back into the cell after a manual entry

View 3 Replies View Related

Run Macro Once When Worksheet Is Deselected

Jun 15, 2009

I have 13 worksheets, one is called invoice.
When i am looking at invoice worksheet nothing happens but when i click another worksheet a macro runs.

I only want the macro to run when i deselect invoice worksheet and only run the macro once every time i deselect it.

View 4 Replies View Related

Using Macro On A Worksheet In A Different Workbook

Jun 22, 2009

This macro uses data validation and copies new entrys to my Company List sheet. In a different workbook (2.xls). Can this be changed so it copies the nesessery data to workbook 2.xls?

This works if i take the [2.xls] out but only on the same workbook. But i need 1 workbook with the list in and 1 workbook that grabs information from that list and adds to it.

View 2 Replies View Related

Protecting A Worksheet With A Macro

Oct 27, 2009

I am looking for code which will protect a worksheet based on the value of a particular cell.

i.e. If cell A1=1, then the worksheet will be protected (ideally with a pswd)

View 5 Replies View Related

How To Reference Another Worksheet In A Macro

Nov 3, 2009

I am writing a macro that will use information from the worksheet in use and the one prior to it. The problem is I do not know how to reference the worksheet that will always come before the worksheet in use. To fill you in, I have a monthly budget worksheet that tracks all my monthly financials. What I like to do is compare this months balances (cash, equity, bonds) and see the amount of loss/gain and percentage from the month before.

Here is what i currently have implemented.

This macro was written in the month of October. For this function the macro I wrote will take Octobers cash balance and subtract it from Septembers cash balance. This will give me the gain or loss. Now the problem is if I were to run this macro in November it will still reference September not October. I always want the macro to use the month before (the 1st tab to the left) not a specific tab. I wrote this macro using relative references so I do not understand why it will not use the tab before. Can someone please shed some light on this for me?

View 10 Replies View Related

Automatically Run Macro With Worksheet Changes

Nov 4, 2009

I want to run a macro I created whenever there is a change to any cell on my worksheet (A1:IV65536). So, for example, if cell A1 were to change from a 1 to a 2, I would like my macro to run.

View 14 Replies View Related

Worksheet Merge Macro

Nov 18, 2009

Disclaimer: I know almost nothing about VBA or Macros. I started with them yesterday. I took the following code off Ron de Bruin's website. I am attaching his example spreadsheet. When you click on Test 2 it does everything I want BUT copy the header row over. The workbook I want to apply this too has 12 sheets++ which have the same exact columns and headers, but different row counts. Ron directed me back to his site and the following code:

View 3 Replies View Related

Macro To Select Worksheet

Nov 19, 2009

I have a workbook with around 350 worksheets. A column in the main sheet contains a list of part numbers which correspond to the names of the worksheet tabs. When a cell on the main sheet containing a part number is selected I would like a macro to find the corresponding worksheet, move that worksheet to the end of the row of tabs and open it.

I am using excel 2007

View 12 Replies View Related

Macro - Next Unhidden Worksheet

Feb 12, 2010

Is it possible to have a macro which navigates to next unhidden worksheet? I am currently using the macro noted below, but they pick up hidden worksheets. Next sheet:

View 3 Replies View Related

Delete A Worksheet Using A Macro

Feb 22, 2010

I have recorded a macro to copy a worksheet, perform some operations on the copy then delete the copied worksheet. My problem is that when running the macro I get a dialog box asking me if I am sure that I want to delete the sheet and I need to press OK. How can I get the macro to say it is OK to delete the sheet?

The last line of my macro is ActiveWindow.SelectedSheets.Delete. I have tried things like:- ActiveWindow.SelectedSheets.Delete = TRUE

View 2 Replies View Related

Macro To Copy A Worksheet New

Oct 17, 2007

*My original workbook consists of 3 worksheets lets call them (W1,W2,W3)
*I am copying W2 in a new book and pasting content of W1 via a macro.
*But if i am to run this macro more then once it doesn't work as the name of the new workbook is different.

see script below:

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved