Runtime Error 1004 :: Open File Through GetOpenFilename

Sep 17, 2008

I am opening the file through the GetOpenFilename method. I am facing an error in of the cases... Like say or example i try and open a file with the XYZ.xls...which is already open. the system generates a mess saying
"reopening will cause any changes you made to be discarded. do you want to reopen XYZ.xls?"

if i click yes...it works fine by reopening the file but when i click to No...Runtime error 1004 comes:

"Method open of object workbooks failed "

and its giving an error here in the Workbooks.Open Filename:=sFilename ......

View 9 Replies


ADVERTISEMENT

Runtime Error 1004 - Cannot Open Pivot Table Source File

Nov 14, 2012

I am trying to adapt a macro to run on data that is consistently in the same format but the data does change, the macro needs to run over and over on new excel workbooks, dynamic range ? instead of a set source ?

Sheets.Add
ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _
"weekly71012!R1C1:R9379C30", Version:=xlPivotTableVersion14). _
CreatePivotTable TableDestination:="Sheet1!R3C1", TableName:="PivotTable1" _
, DefaultVersion:=xlPivotTableVersion14

I am sure this is the problem as i initially created the macro using weekly71012 excel file however i just want it to run on every file i pull it off?

View 2 Replies View Related

Runtime Error 1004 - Unable To Save File

Mar 30, 2014

I am executing code in a workbook that has been working successfully previously.

Suddenly I get a run time 1004 error in any macro in the workbook that tries to execute a activeworkbook.save command?

View 1 Replies View Related

Run-Time Error '1004' Cannot Open PivotTable Source File 'Consolidated Report'

Oct 2, 2008

I have a macro that takes the date from different excel sheets, consolidates the data and renders the pivot table and chart accordingly. It was working fine when the date range defined for the pivot table was static. Now I have made it dynamic since the data range changes each month depending on the number of days it has got. When I run the macro, it runs succesfully, generates the report and save & close the report, but after that I am getting this error. Errorneous

View 2 Replies View Related

Runtime Error '1004'

Jan 12, 2007

Is there a limit on the amout of pictures you can use with the statement me.pictures.visible? Reason being, I am trying to import 119 pictures into a spreadsheet. When the information is selected form a drop down list, it pulls up the 1 of the 119 pictures. I was able to get 54 pictures input. Everything was going great until the 55th. When it stared giving me an error...
______________________________________________
Runtime Error '1004':

Unable to set the Visible property of the Pictures class
______________________________________________

When I select Debug, it takes me to the line with Me.Pictures.Visible = False

Everything seems to work fine until I enter the 55th picture. If it is that, is there a viable work around?

View 9 Replies View Related

Runtime Error 1004,

Feb 22, 2007

Getting a error message when opening a workbook "Runtime error 1004" I dont know much about excel and the user explained it to me as best she could . Here is where the script bugs:

Sub auto_open()
fdist = ActiveWorkbook.Name
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Worksheets("f_cumul").Cells.ClearContents
Worksheets("f_cumul").Cells.ClearFormats
Worksheets("vtes_dj").Select
Range("a1").Select
Selection.End(xlDown).Select..............

View 9 Replies View Related

Keep Getting Runtime Error 1004

Apr 21, 2014

When I run the following code it keeps giving me a runtime error 1004.

Code:
Sub ImportData()
Dim fNameAndPath As Variant
Dim wb As Workbook
Dim cNextRow As Long
Dim Ans As String
NextRow = ThisWorkbook.Worksheets("Errors").Range("B" & Rows.Count).End(xlUp).Row + 1
cNextRow = ThisWorkbook.Worksheets("Compare").Range("A" & Rows.Count).End(xlUp).Row + 1

[code]...

View 3 Replies View Related

Runtime 1004 Error

Feb 15, 2008

I have this macro and I keep getting a 1004 runtime error 'PasteSpecial method of range class failed' on the highlighted line,

Sub Print_()
'
Sheets("Sheet1").Select
Cells.Select
Selection.Copy
Sheets("Print").Select
Cells.Select
Selection.PasteSpecial Paste:=xlPasteColumnWidths, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
Selection.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Application.CutCopyMode = False
With Selection.Interior
.ColorIndex = 2
.PatternColorIndex = xlAutomatic
End With

View 9 Replies View Related

Runtime Error Code 1004

Jan 16, 2007

I am converting Excel Templates which were developed in office 97 to Excel 2003.The templates are running fine in office 97 ,but when I run the same template in off 2003 I get the error "Run time Error Code 1004 : Application or Object Defined " and when I tried to debug the cursor is pointing to a cell which contains a formula which add multiple cell values.Can any one throw some light on this why the template which works fine on office 97 is not working in office 2003?

View 11 Replies View Related

Runtime Error 1004 While Loading Add-In

Jul 6, 2009

Runtime error 1004 while loading Add-In. I have a workopen event as follows:

View 4 Replies View Related

Runtime Error 1004 With Use Of WorksheetFunction

Dec 14, 2009

Few hours ago, I wrote a simple procedure in order to get an average of a range of 10 cells (A1:A10). Within the code, I typed these following lines:

View 4 Replies View Related

VBA Runtime Error 1004 On Formula

Nov 21, 2012

Application-defined or object-defined error 1004

when I register the formula in the macro they work perfectly, when I run I receive this message, really do not know why I thought maybe I should substitute something but really is too complex for me to go inside that.

ActiveCell.FormulaR1C1 = _
"=CONCATENATE(IF(AND(R[10]C[-2]0.01*R[10]C[-1]),INDEX(R[46]C[2]:R[49]C[2],RANDBETWEEN(1,4))&TEXT((1-R[10]C[-2]/R[10]C[-1]),"" #%""&"", ""),IF(R[10]C[-2]5,INDEX(R[55]C[7]:R[56]C[7],RANDBETWEEN(1" & _
" "",IF(R[27]C[5]>7,INDEX(R[55]C[8]:R[56]C[8],RANDBETWEEN(1,2))&"", "","""")))"
Range("D5").Select
ActiveCell.FormulaR1C1 = _

[code]....

View 1 Replies View Related

Runtime Error 1004 VBA Code

Feb 28, 2014

I wrote the below code, the error seems to be occurring on the ActiveSheet.Name line. At this line the debugger is giving the runtime error.

Sub ListWorkSheetNames()
Dim Sheetnames
Sheetnames = Sheets.Count
Sheets.Add
ActiveSheet.Name = 'SheetList'
Sheets(SheetList).Move after:=Sheets(Sheetnames + 1)
For i = 1 To Sheetnames
Range(A & i) = Sheets(i).Name
Next i
End Sub

View 5 Replies View Related

Vlookup Runtime Error 1004

Aug 14, 2009

I used the formula from this website to do a vlookup for pictures
www.mcgimpsey.com/excel/lookuppics.html

It was working great then I seem to have a problem currently I have 58 pictures on the spreadsheet and when I add the next one I keep on getting an error

Error reads

Runtime error 1004
Unable to set the picture property of the picture class

View 9 Replies View Related

Runtime Error 1004 When Username Not In List

Mar 13, 2014

I am getting an Run Time error 1004 Application-defined or object defined-error.

I am assuming this is occuring because the username is not in the list for the pivot table as I am using some code which includes Environ, some code that if user name is not in pivot table then bring back no data or make pivot table blank. I have included the code below.

[Code] ........

View 1 Replies View Related

Runtime Error 1004: Too Many Different Cell Formats

Feb 28, 2009

I've just recently ran into this Error (Runtime error 1004) "Too many different formats." I'll admit i have a ton of cell formats within my single worksheet.
perhaps most are for artistic purposes.

Still, my worksheet as it is causes this error, when running my scripts. When I wipe out all my format color, boarders, etc. my scripts run fine. Is there a maximum amount of cell formats that can be used? I'm using Excel 2003

Is there a way to circumvent this?. Not sure if using Excel 2007 is an option:
I've tried opening my project in 2007, but found that all my buttons were missing, plus it seemed to run considerably slower.

View 2 Replies View Related

Countifs For Date - Runtime Error 1004

Sep 23, 2011

Here is the data I am working with. On another sheet, I want to count the number of entries on Total requests sheet if Column M - Closed < Column Q - End Date. There is other criteria and I have this, which doesn't work: Run-time error '1004' Application defined or object defined error. I think it is due to the part where I'm working with the dates...

======================
ActiveCell.FormulaR1C1 = _
"=COUNTIFS('Total Requests'!R2C3:R" & tot_req_row & "C3,RC1,'Total Requests'!
R2C10:R" & tot_req_row & "C10,""5-Very Low"",'Total Requests'!R2C13',""

View 2 Replies View Related

Syntax Range - Getting Runtime Error 1004

Feb 15, 2013

I know you can use the syntax range(cells(x,y),cells(z,w)) but for some reason unknown to be the following isn't working:

Set CurrSuppRange = TT.Range(Cells(1, CurrSuppCol), Cells(LastRow, CurrSuppCol))
where
CurrSuppCol = cboxCurrSupp.ListIndex
OurSuppCol = cboxOurSupp.ListIndex
LastRow = Workbooks(lbWkBkName.Caption).Worksheets(cboxWorksheet.Value).Cells(Rows.Count, "A").End(xlUp).Row
(each return integer values)
Set TT = Workbooks(lbWkBkName.Caption).Worksheets(cboxWorksheet.Value)

(tested and works fine)

View 2 Replies View Related

Runtime Error 1004 - Cells Not Locking?

Jul 23, 2013

I am trying to protect cells & password protect my workbook on closing. Here is my code. Not only is the cell locking code not working, but it is also preventing the code from re-hiding the columns ("P:P,R:R,W:W,U:U,AA:AA"). Here is my code; I've tested it on a blank sheet & it was working:

Private Sub Workbook_BeforeClose(Cancel As Boolean)
Application.ScreenUpdating = False
Application.EnableEvents = False

[Code].....

View 2 Replies View Related

Runtime Error '1004' Section Is Too Large

Jan 19, 2007

I am copying a large section of formulas. It has to paste one row of formulas into an area from A2:AI46754.

I get the above error in VBA.

View 9 Replies View Related

Runtime Error 1004 :: Active Cell Contains A Value?

Mar 27, 2009

I want the code to determine if the cell before and after the active cell contains a value and if both these conditions are true to delete the active row.

I keep getting a runtime error 1004 when I try this...

View 9 Replies View Related

Runtime Error 1004 :: Cut Invoices Out Of Several Workbooks

Jul 20, 2009

I'm currently trying to make a script that will cut invoices out of several finance workbooks, I have ommitted the main part of the processing as it happens later and does not have any bearing on this problem.

When it reaches the line I have marked, it breaks with the error "Runtime error '1004': Select method of worksheet class failed". I'm fairly sure the problem lies with the Workbook but at the time of break WbZ is set to a valid workbook (FinanceSheet_SP_Thomas.xls in this case) and the workbook contains a sheet called "Invoice Sheet".

Sub Extract() ...

View 9 Replies View Related

Copying Data Gives A '1004' Runtime Error

Nov 16, 2009

worked at one point but now gives a '1004' runtime error. What I am trying to accomplish is have the user display a line of data on a userform, modify it, then write it back to another sheet in the workbook.

My ...

View 9 Replies View Related

Runtime Error (1004) For Inserting Formula Macro

Aug 21, 2014

I manage to find a macro online, which aims to insert a desired formula into desired cell range. However, when I execute the macro, i get a "run-time error, 1004".

View 1 Replies View Related

Runtime Error 1004 Unable To Set Locked Property?

Oct 27, 2011

I have a sub that I have copied out of a previous workbook where it still works fine. In the previous workbook it was assigned to a button. Now I am trying just to do it as an automatic action when the workbook is closed

It will lock any cell within the specified range that is not blank then protect the worksheet, save the workbook then save a dated archive copy

When I pasted it in to a new workbook I changed the range to A1:AP49 and strFileName

Now when I run it now I get an Error 1004 - Unable to set the Locked property of the Range class.

On Debug this line is highlighted:-
c.Locked = c.Value ""

The full code is:-

Private Sub Workbook_BeforeClose(Cancel As Boolean)
'
' Lock_cells Macro
' Macro compiled 10/26/2011 by G CARNCROSS

' Locks used cells, saves the workbook then saves a password protected copy with the days date in the file name then closes the workbook
'
'
ActiveSheet.Unprotect Password:="SHES"[code].....

View 2 Replies View Related

Runtime Error 1004 Command Is Not Available In Shared Workbook

Mar 15, 2013

i have this code for copying diffrent ranges of cells and saving it in different workbooks:

Sub NewCopy()
Dim strFileName As String
Dim range1 As Range
Dim rng1 As Range, rng2 As Range, myMultiRanges As Range

[Code].....

the problem is when is share the workbook, it generated the runtime error '1004' Command is not available in a shared workbook... make it work even in a shared workbook.

View 3 Replies View Related

Runtime Error 1004 When Using Paste Special Method

Aug 9, 2013

I am trying to execute the following code, but I get a runtime error 1004 (paste special method of range class failed).

Code:
Sub ReviewedStatusReport()
'Define variables
Dim ws1 As Worksheet
Dim ws2 As Worksheet
Dim ws3 As Worksheet
Dim ws4 As Worksheet

[Code] ........

View 9 Replies View Related

Runtime Error 1004 :: Creating Unique List

Nov 3, 2007

I currently have a list of companies. I want to create a unique list of these companies which I can use for some irrelevant purpose. What i did was I started recording a macro in which I first deleted everything in the spreadsheet. Afterwards I copied the whole company list from another spreadsheet and pasted it as values into the new spreadsheet. Afterwards I made an advanced filter; list range being the companies and copied it into a new location after making sure I had said yes to unique only.

Here is the code itself:

View 9 Replies View Related

Runtime Error 1004 When Copying And Pasting Data To Another Sheet

Apr 17, 2014

I'm generating a runtime 1004 error with the macro I have attached to CommandButton1, "Clock_In".

The macro is copying the name, date and time from 3 cells on Sheet1 and pasting special values to another sheet.

View 2 Replies View Related

Turn List Into Correlation Matrix Error Runtime 1004

May 25, 2014

I am trying to turn a list into a correlation matrix.

Goes like this :

From :
1 1 1
1 2 0.6
1 3 0.7
2 2 1
2 3 0.9
3 3 1

To
1 2 3
1 1 0.5 0.6
2 e 1 0.9
3 e e 1

The first list is from worksheet 1, and im trying to create the matrix in worksheet 2. Both worksheet is in the same open workbook.

Here's the code I've been using

Sub button1_click()
Dim i As Integer
Dim j As Integer
Dim b As Integer
Dim a As Integer
Dim c As Integer

[Code] ........

Now the weird thing is, this worked on a smaller matrix before (31 x 31) but now it just would't work at all (85 x 85)

it keeps giving me the error run time 1004 : application defined or object defined error.

Here's the file : matrix.xlsx

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved