I have many text boxes on a form and if any of them are empty then I want a msgbox to popup and exit sub. I know how to do the following
If txtExample1 is "" then msgbox and exit sub
if txt....2
if txt...3
Is there anyway to group the text boxes to test for empty so you don't have to list 20 textboxes
I have files where empty textboxes have been copied over tens if not hundreds of times, thereby slowing down the scrolling speed immensely.
I would be interested if there was a macro to
a) select all empty text boxes
b) select and delete all empty text boxes
I was given two files from an old DOS pos system to make a current mailing list with.
The first file is a list of all the customers from this company(full list), the 2nd is all the customers active within the previous year(active list). I don't have any access to any information other than what is on the 2 lists I was given and I need to use the active list to make sure that only the current customers get sent anything. Not normally a big issue, if it weren't how these lists were formatted when given to me. The full list is a mailing list that was formatted to run labels from a dot matrix printer and imports to excel in the following manner,
John & Jane Doe
1234 NE Road St
Someplace, OR 97056
The active list is formatted like:
Doe | John & Jane
Because there is no address information on the active list I can't just generate a full mailing list. I am able to seperate the values from the full list by referencing cells onto another worksheet (it seperates as 'name' 'address' 'city/state/zip') but I need to find a true/false formula, or something similar, that will tell me which names on the full list are also on the active list. I can do it the other way around, and check to see which names from the active list are on the full list (all of them) but because of how the values are seperated on each worksheet I can't seem to figure out how to make this work.
I have 10 Text boxes each, on many tabs of a Multipage. I have a Private Sub LoadRow() for one tab.Is there a way to use a Sub that would work for each tab or do I have to write a new sub for each tab? Here’s the sub I’m using.
Private Sub LoadRow()
txtTrussco.Text = Cells(lCurrentRow, 1).Value
txtTPhone.Text = Cells(lCurrentRow, 2).Value
txtTFax.Text = Cells(lCurrentRow, 3).Value
txtTAddress.Text = Cells(lCurrentRow, 4).Value
txtTCity.Text = Cells(lCurrentRow, 5).Value
txtTState.Text = Cells(lCurrentRow, 6).Value
txtTZipcode.Text = Cells(lCurrentRow, 7).Value
txtTSalesrep.Text = Cells(lCurrentRow, 8).Value
txtTSrepphone.Text = Cells(lCurrentRow, 9).Value
txtTrusseng.Text = Cells(lCurrentRow, 10).Value
End Sub
I have a userform within an Add-in. The form contains multiple text boxes, shown as a grid. When the user uses the calculate button - the text box in question is raised and highlighted using the follwing code within a case statement:
View 2 Replies View RelatedI have a userform with 40 text boxes in it. I have learnt how to restrict people entering anything other than numbers into a text box using the following code on the keypress property of the textbox:
Const Number$ = "0123456789." ' only allow these characters
If KeyAscii 8 Then
If InStr(Number$, Chr(KeyAscii)) = 0 Then
KeyAscii = 0
Exit Sub
End If
End If
Rather than have 40 of these blocks of code (one for each text box), is it possible to somehow group them so that a block of code is applicable to all of them?
For the sake of arguement, the textboxes are called data1 up to data40
I am trying to find out how to set my spreadsheet to highlight a row if four of the first five columns in that row are blank (i.e. if there is a company name in the first column but the next four are blank then highlight that row). It would also be acceptable for just the first box in the row to be highlighted, rather than the entire row - whichever is easier to formulate.
I've tried lots of conditional formatting formulas I've found online but none have worked so far, and I think it may be because there are no numbers in the spreadsheet at all.
I have a userform that loads with when excel starts. The workbook has a second and third sheets with names from A1 to A20. The form is used to add information to the first sheet. There are two list boxes on the form the reference via VBA the names on sheets 2 and 3. When form initially opens the list boxes are void of data. I also have a macro that reopens the form without having to close the workbook. When I close the form and reopen it the list boxes are populated as they should be - so the list boxes are working correctly just not being populated initially. In the open form module I have code that sets the rowsource for the data on sheet 2 and 3. Why the userform does not populate when the workbook initially opens?
Here is the code in my open userform module
Sub openuserofrm()
ActiveWorkbook.Sheets("VILLAGEvisits").Activate
Sheets("VILLAGEvisits").Unprotect Password:=""
Sheets("OldVisits").Unprotect Password:=""
[Code] ....
I have 1 list with two columns, where column A is the location (a 3 digit code), and column B is the name (a 4 digit code).
I have a second list with two columns, again column A is the location, and column B is the name.
I want to make sure the locations and names in the second list match what I have in the first list. If they don't match, I somehow want to flag this in a third column.
I would like to create a formula that would verify that specific work shifts have been covered each day. The spreadsheet has already been created by someone else, so I am hoping not to recreate the wheel.
The goal is to make sure that all desired shifts are covered with a result in the last cell of the column that would indicate "covered", "not covered" or even a true or false statement.
As an example, an 8am shift is needed. The choices are 8A or 8ALEAD and only one of these is needed for each day.
Can something be set up with conditional formatting from a master list of required shifts.
such as: 7OR, 730*(for just 730 and 730LEAD), 11A, etc.
This is just a snippet of what the schedule looks like: ...
Is it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?
I have a couple of excelfiles in which someone made a flowchart with text boxes. I would like a search code that would help me find a text or number in those text boxes. The CTRL+F function only works on cells. Does something similar exist for text boxes? Or can this be made in a macro?
Trying to Find a specific word and Replace with another within a textbox ( created from the drawing tool, as well as the control toolbar) The textboxes contain loads of text information.
as an example
The word "Apple" to be replaced with "Orange"
I came across this code from the archives (compliments of Dave Hawley)
Sub ReplaceTextBoxText()
Dim sTextBox As Shape
Dim wSheet As Worksheet
Set wSheet = Sheets.Add()
For Each sTextBox In Sheet1.Shapes
I've tried several variations with no results. (perhaps it's to extensive for my modest needs)
I would like to rows based on multiple column conditions criteria. ie., if the columns N, O, P values are "", then hide the particular row. The logic given in the website here, i tried But, it is not 100% working. It works for a few rows at the start of the database & it works for the rows at the end of the database. In between, for a few rows, even if the column values are "" it does not hide those rows.
View 2 Replies View RelatedFor example:
Locking a certain text boxes, and not others. Under review, protect sheet, the Edit Objects function is all or nothing
I m creating new tabs that users input into a text box and two label: one each becuase one tab will be Tab1 then then other label will be Tab1 Completed.
How do you continously update the label so it changes as the user inputs letters.
I never used text boxs before so thus another reason I have no clue.
Am trying to use a VLOOKUP in VBA on a form, I am entering data in one field so data will be displayed in another field. They are both text boxes. Here is the code;
View 3 Replies View RelatedI have a ton of text boxes on a userform that are in an initial state of being disabled. Is there a quick way of enabling by use of a mask for these Text Boxes ?
All the text boxes I want to enable are named "TB_fieldname" and by mask I mean a snippet of code using something like "TB_*"
Example
tb_liqname, tb_casecost, tb_bottleprice etc etc..
I may be doing this wrong, but I have a form that i created using Active X controls in Excel 2007 (I couldn't use the form control text box, it was greyed out). I have textbox1, textbox2 etc... I got the form to work but I can't tab through. When the user is done entering data in textbox1, I want to set the focus to textbox2. i would like this to happen with enter and tab.
View 9 Replies View RelatedI have been working on an excel sheet with several text boxes that need data manually putting into them. I have set the texts boxes out in the correct order and could tab thru them perfectly in order, but then I saved, closed then reopen the document and now the text boxes do not tab in order. I have tried to rearrange them, delete them and start again but the same problem happens every time and I cannot get the tab order of the text boxes to stay in order
View 24 Replies View RelatedThis is a repost, I would like to add a comment boxe in multiple sheets (same cell) in a work book. Someone reccomended a macro but then my post was removed.
View 12 Replies View RelatedI have a manualy constructed user form which has 3 data validation lists.
Sources:
B7 = List 1
B12:B15 = List 2
B17:B20 and C17:C20 = List 3
These operate fine but I wish to replace the dropdown validation boxes and replace them with Combo boxes so that users are able to view the complete lists and also offer the option of inputting an item not included in the validation list if required.
I have tried many variations of input but my knowledge base is inadequate!
Mainly I end up with the combo box working on one cell only!
Can tell:
1. Do I have to raise 1 combo box per cell?
2. What vba code is necessary to make them all work?
I did away with the merged cells, and now I have a combo box in every cell that I want it in.
My problem is, I would like to format each combo box seperately. Every cell that has a combo box in it has data vakidation activated. I copy and pasted code to get it to work. It works great, but I would still like to change the combo box size and tab and enter functions for each individual one. I created more than one combo box but I kept getting an error on them. Any help or knowledge would be greatly appreciated.
I am posting just the code that I copy and pasted.
I am trying to combine the text from the comments boxes of a full row of cells into the comments box of a separate other cell in order to provide an overview of the comments in these cells in one place.
View 2 Replies View RelatedHow can I link two text boxes in excel so the text can flow from one to another?
View 2 Replies View Related I am wondering if the user can use 2 boxes to search and populate the record.
Ie./ Box 1= Vehicle Registration Box 2= Date
This sheet will be used throughout each month and each vehicle registration may have more than one record that month
So I need the user to be able to input the vehicle reg and for the form to populate the relevant record.
I current have a Unique reference which is a combo box that once you select it auto populate the record but this will take forever having to populate ach record to find which one the user is looking for.
I have a file that another person created and instead of traditionally saving, the only way to save file is by hitting X in top right corner and then a series of boxes pop up directing the user on what to do. I looked at macros within file and couldn't find anything really relating to the saving functions of document. This is a complex document and I'm starting to think that it isn't a macro. Is there any area in excel that allows you to adjust save settings? All I'm trying to do is change the wording in these pop up boxes but cannot find the source. Attached is screen shot of first box that pops up.
View 4 Replies View RelatedI made up a form of 30 text boxes to simplify entering data, but seem to be having a problem inserting it easily back into my excel file.
I would like to use a simple Do While loop to shorten my code but can't seem to change my text box correctly.
My text boxes all have names like this txtap1run11, txtap1run12, txtap1run13...
As you can see all I need to do is change the last number of the text box name.
I can't figure out how to do that though. I came up with this, I don't have the do while loop in.
Currently I'm using this:
View 9 Replies View RelatedI have a workbook that has multiple sheets. And on lets say as an example the first and third pages I have text boxes "reason for text boxes is for sizing issues" that are on both pages that are identical and have the same info that needs to be entered into them. What I would like to accomplish is when info is placed in those text boxes on the first sheet their values auto populate onto the third sheet and so and so forth. Being multiple text boxes on multiple sheets, going through all 5 would be daunting and time consuming.
View 6 Replies View Related