An IF Or SUM Formula- The Rows Showing Data/values To Be Copied

Jan 17, 2007

I want cell B4 on sheet 3, to show the value of cell B4 on sheet one ... only if there is a value in B4 on sheet one then i want the rest of row 4 to be copied to sheet 3 also.

HOWEVER if the value in cell B4 sheet 1 is BLANK/EMPTY then i want the full row to be over looked and the next row to be checked (B5 all the way to B30)

Once B4-30 on Sheet 1 has been checked and only the rows showing a data/value have been copied to sheet 3, i then want the same process to start again on sheet 2 - Again only the rows showing data/values to be copied.

How To Copy Row To Last Row And Paste Copied Rows Directly Below Copied Contents

Oct 20, 2013

with a macro. I am looking to copy row 2 to the last row and past the copied rows directly below the copied contents.

Formula Down Rows When Copied Across Columns

Aug 24, 2006

I am looking for a formula that reads down when drug to the right.

Excel 2010 :: Copying 3 Rows Of Formula And Using Autofill To Only Add 1 Each Time When Copied Down?

Sep 2, 2013

I am using Windows 7, with Excel 2010.

I have one Worksheet Short Course - PB's Which contains all swimmer information and searches through all previous swims and reports back the swimmers current Personal best times (PB)

I am creating a work sheet to calculate percentage increases over a set date period. I have managed the calculations but can not get the autofill to function as I was hoping.

In my short course sheet 1 Row = a Swimmer and there details

In my new sheet, I have 3 rows for the same swimmer

Row 1= Swimmer and PB's before a set date
Row 2 = Swimmer and PB's After set date and upto Todays date
Row 3 = Percentage calculation of difference between the two rows to enable track performance increase

I have all of this working and in place and want to copy the formula's down now to cover all swimmers in the club.

When I copy the 3 lines down, Autofill adds 3 to the row reference for the first line and I just want it to add 1.

ROW3) =IF('Short Course - PB''S'!A3="","",'Short Course - PB''S'!A3)
ROW4) =A3
ROW5) = A3

[Code].....

Prevent Formula Showing Error Values #DIV/0!

Jan 18, 2008

I Spoke too soon here, I am getting value errors, how to do it with conditional formating. I tried if cell value is =to #DIV/0! then white (dosent work). Richard this dosent seem to work mate =IF(SUM(F6:V6),"",AL6/SUM(F6:V6))

VBA To Execute When Data Values Copied / Pasted Into Range Of Cells

Jan 27, 2014

Below is code I have attempted. I am learning VBA and have gathered this code from the internet and this forum. I have data that is in columns B to E and from row 7 down. I want this VBA code to run when data is copied/pasted in these cells. Where the last values stop will vary so I just want to be sure this code is executed after all the data is pasted in these cells. The data will be pasted at one time. When the user removes the data from these cells, I do not want the code to run.

Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if less than four cells are changed or content deleted
If Target.Cells.Count < 4 Or IsEmpty(Target) Then Exit Sub

[Code].....

Formula Not Capturing Data When Copied Down

Nov 4, 2006

I am trying to copy a formula down a row. All I am getting is the exact same answer from the 1st cell instead of the new data.

Hide Duplicates In A Column But Showing All Rows Data

Dec 17, 2012

I have to show a report with 3 columns= Physician names, Section and number of procedures. The problem is that physician name repeat several time according the section they order and I need to show in the first column each Physician name just one, see attached picture.

I did try to use conditional formatting and advance data formatting but not working properly for me. I was able to use =A2=A1 conditional formatting and hide duplicates physician names but shows only the last row of the duplicate names no the first one.

Data Not Showing - Although Can See In Formula Bar

Jun 20, 2012

A student is in their exam and they have entered the formula correctly but the result is not showing - only showing 0.

Formula shows in formula bar.

Formula view is turned OFF.

Turning it on shows the formulka

Why cant she see the results?

Formula For Showing Data Depending On Cell Entry

May 18, 2007

I need a formula that displays the word "Day" or "Days" depending on cell entry i know the formlula =IF((B12)>0,"Day","") to show the word day but i want it to show "day" if a 1 is entered or "days" if any number over 1 is entered.

How To Delete Copied Rows And Update Original Tab Without Empty Rows

Apr 3, 2014

In my excel I'm copying rows upon specific criteria to another tab.

The question is how I can delete copied rows and update the original tab without empty rows? (N of rows is always changing)

Data From The Data Sheet Is Copied Over To The Report Sheet With Formula

Apr 11, 2007

The data from the Data sheet is copied over to the Report sheet with formula.

Basically, what I need to do is If statement:
-when there is no any data in csv file (so the Data sheet will be empty);
-the range (A7:N1000) to be hidden (on the Report Sheet)
-the Report sheet to be saved

and also...

I would like to ask, how to select from the Data sheet, the rows with Data only. I copy them over with formula instead of macro- but would like to hide all the empty rows on the report.

Option Explicit

Sub Update_Report()
'
' Macro1

Dim extract1 As String
Dim dReport As String
Dim rSheet As String
Dim dSheet As String

dReport = "Appointments.xls"
rSheet = "Report"
dSheet = "Data1"

Application.ScreenUpdating = False

VBA Deleting Rows Just Copied

Feb 1, 2013

I have this bit of code which is working perfectly. Now I need it to delete the rows it just copied. How would I go about doing this?

Sub TESTMonthEndReport()
Dim x As Long, y As Long
y = 2
Application.ScreenUpdating = False
For x = 1 To Worksheets("January 2013").Range("K276").End(xlUp).Row
If Worksheets("January 2013").Range("K" & x) = "Waiting" Then
Worksheets("January 2013").Range("K" & x).EntireRow.Copy
Sheets("February 2013").Range("A" & y).PasteSpecial
Application.CutCopyMode = False
y = y + 1
End If
Next x
End Sub

Rows Copied Into List Box

Jun 29, 2006

I have a spreadsheet that is controlled solely by userforms. I have a search button that finds all cells that match the query and copies the whole row into another sheet, often about 10 rows appear. What I now would like to happen is that these rows are then copied into a list box for viewing in the form apposed to in the spread sheet.

I have a sample spreadsheet to show how the data would be set out.

Insert Copied Rows In All But 3 Sheets

Apr 19, 2008

One of the sheets in my workbook has 5 rows (Rows 1 - 5) that I need to copy and insert at the top of all but 3 of the other worksheets. I can specify the names of the 3 worksheets that I want to avoid changing. The other worksheets will be named differently each time I use the macro.

Copied Values Are In Wrong Format?

Mar 31, 2014

My problem is that i am copying values from one sheet like: 1355,588846 and 456,23589 and storing them in a array. When i want to display the array in another sheet the values come out like 1355588846 and 45623589. So in the first sheet excel recorgnises the comma as a decimal number and in the other sheet as a thousand separator. How can i change this?

My code is:

[Code] .....

Copying Rows In One Workbook To Another - Not All Text Copied

Jul 18, 2013

We keep spreadsheets that have several columns of data, one being "comments" which contains quite a bit of text. I needed to copy some rows off the one workbook into another. Everything copied fine except it cut off part of the comments when I pasted to the new workbook.

Copy CSV File Into Excel - Not All Values Will Be Copied

Apr 15, 2014

I want to copy a csv file into a excel, but not all values will be copy into the Excel. Watch out for my code:

Private Sub ImportiereCSVDatei()
Dim wbTarget As Workbook
Dim wbSource As Workbook

[Code]....

dh. Zeros and values after the Column "Stand_NACH" will not be represented in the excel but the header will allways displayed

Copy Only Values And Insert Copied Cells

Aug 1, 2006

i have some columns which contain the IF function and so it returns me a value in each cell. Is there any way to copy only the values AND insert shift down the copied cells onto somehwere else?

Adding Multiple Rows Using Insert Copied Cells Function?

Feb 26, 2013

I have a spreadsheet with 27 Columns and 439 rows of data. I need to copy each row of data that has a certain criteria and paste the same data 141 times below it and then manipulate the data. In the same spreadsheet I need to copy a row of data that has other criteria in it and past it 30 times below it, and then manipulate the data.

I have been using the copy and insert copied cells function, but I have to scroll down 141 or 30 rows each time to ensure I add in the correct amount of rows. Is there a more productive way to do this? I have about 10 workbooks with approximately 47 tabs/worksheets each that I will need to update in a similar fashion.

Show Copied Formula

Sep 7, 2007

I have a problem in copy formulas form one cell to another, my formulas are writen in one workbook in this way... '=Dog+Cat.

The problem is that I did a looking table code (vlookup) and when it shows the formula I have #żName?.

I would like to knw if there is a way to fix this using the vlookup or I'll be obligated to use special Copypaste

Relative Formula Copied Across Worksheets

Dec 8, 2008

It's been a long time since I have worked with Excell, it use to be the " \$ " that made things absolute or relative.

I have this formula:

='1'!C194+C193 on sheet 1 named "1" without the " ". I need to copy it across 31 sheets. I thought that it was the " ! ", without the " ", that makes the address absolute so I took it out and then attemped to copie it to other sheets. The idea was that the formula would then read: ='2'!C194+C193 on sheet 2, and ='3'!C194+C193 on sheet 3 and so on. The formula is in the exact same location on each sheet, C194. But this won't work. I am at this time doing each formula one at a time. I have many workbooks that will use the same style of copy and paste; about 15 workbooks each with 31 sheets.

It would help if someone could explain how to save time. I do know how to use the Ctrl to select different cells and how to use Ctrl+Page UP/Down to change tabs. I just have to get the formula correct.

Formula Change To Allow A List To Be Copied.

Jan 9, 2009

I have a formula that basically copies a cell into another workbook if 'other' is entered into the column to the right. i,e cell A1 has 'other' B1 has '100', the figure in B1 is placed into another workbook cell. The results are only shown if a month is selected from a drop down on the 1st workbook with the meta data.

What I want to do is to add a command to the formula below so that it will recognise that after the first item is entered it will look for the next data item and not just repeat the first….

{=IF(\$L\$92:\$L\$580="","",INDEX(\$L\$92:\$L\$580,MATCH(1,(TEXT(\$C\$92:\$C\$580,"mmmm yyyy")=TEXT(\$E\$5,"mmmm yyyy"))*(\$L\$92:\$L\$580<>""),0)))}

In the attached worksheet is an example of what I want (table 2) and what I'm currently getting (table1)…

Inserting Copied Text Into A Formula Using VBA

Jul 31, 2012

I am trying to write a macro that will allow me to copy the text of a cell, and then insert text around that previously copied string. I am having a problem adding the copied text into my formula. Here is my code below:

Sub Bid()
'
Selection.Copy
ActiveCell.Value = "inventory levels are " & ActiveCell.PasteSpecial(xlPasteValues) & " and oversold by"
ActiveCell.Offset(1, 0).Select
End Sub

Change Sheet Name In Formula When Copied Down

Jan 2, 2007

Suppose I have 100 worksheets in a workbook ( named 1,2 3 ........100) in a collecteve sheet ( I have a coulmn of 100 same formulas refering to the same cell in all the 100 worksheets)

for example :
'1'!\$a\$1
'2'!\$a\$1

if I drag the first formula Fill Down With Fill Handle then, the sheet name will be the same all the way down(1) , which is not correct , so I have to go bach and modify them manually , which is very boring and mistakes could easily happen

Showing Values In A Cell

May 29, 2014

I am using dglinfo with if statements, and I know that the spreadsheet is updated but the only way I can show the value in particular cell is by hitting the fx. Is their a way to show all the values at once instead of going cell by cell?

Showing Duplicate Values

Nov 6, 2008

I have to compile spreadsheets as tables of various values. One column in particular is a column of ID numbers and the worksheet is very very long. I need a method for checking this one column for duplicate ID numbers.

Showing A Difference Between Values

Sep 14, 2009

I have a spreadsheet with a lot of rows and there are three columns that can have a one of two values in it. These values are constantly changing from row to row, not just like a yes or no sort of thing. However 80% of the time they are the same values in all 3 columns, but I want some way of quickly identifying when there is a difference between column G, I, & K which are my three column names. So is there a way of conditionally formatting this to make a difference highlight in red or something like that?

Not Showing Pivot Values Of Zero

Sep 6, 2005

Did you try filtering the list see Debra Dalgleish's index page
[url]

---
HTH,
David McRitchie, Microsoft MVP - Excel [site changed Nov. 2001]
My Excel Pages: [url]
Search Page: [url]

"BorisS" <BorisS@discussions.microsoft.com> wrote in message news:1DD652B0-CDC0-43D4-9D46-7A3616FF7255@microsoft.com...
> I am getting lots of values in my table which are zero. I have a calculated
> item, and don't know if that is the problem. How, if at all, can I get any
> line which has all zeros to not show up? the table gets excessively long
> with them, not to mention the calculation takes forever.
>
> --

Chart Not Showing Zero Values

May 9, 2011

I'm making a chart for values of L6:L40 which are all percentages.

The chart is a bar graph..

On C6:C40 i have movie titles. (the amount which vary by week.

ON MY CHART.. i always have at the bottom a bunch of bars that just show 0.00%

How can i get the bar graph to only recognize values either where..

values are greater than zero in the l column rows.. or value is not equal to "" null in the c column?

Is this possible?