# Calculating Hours Worked For 3rd Shift

Nov 27, 2012Weekly Timesheet.xlsx

This spreadsheet calculates hours worked great for first and second shift but when you enter times for third shift it goes all whacky with the outcome.

Weekly Timesheet.xlsx

This spreadsheet calculates hours worked great for first and second shift but when you enter times for third shift it goes all whacky with the outcome.

ADVERTISEMENT

I have been working on a timesheet but the problem I have come across is calculating actual hours worked only in the core hours and any work outside the core hours is calculated in the outside hours column. A standard work day is 7.6 hours working between 8.30am and 5.00pm. However if someone was to commence work either before 6am or after 8pm this is outside of core hours. I have attached an example of my timesheet for you to see what I am talking about.

View 3 Replies View RelatedIs it possible that a cell contains both numeric and alphanumeric data and to do calculations on that?

For example: if a cell conatain the value "10a" or "8.5b" etc. Would it be possible to have a column that gives me the hours worked (the numeric value in the cell) and a line that gives me the amount of people that are working on shift "a" (the alphanumeric value in the cell).

Is this at all possible? Or does that require VBA/Macros and stuff (in which case this is posted in the wrong part of the forum )

I can do the timesheet formula for adding the hours worked as follows:

Start Finish Total

08:45 17:15 8.5

However, it doesn't work when I fill in a whole week work of hours in this format:

Start Finish Total

08:45 17:15 08:30

It works on a daily basis, but when total hours exceeds 24, the formula get's all mixed up - how to I format the total column to account for every 5 minutes worked, which you can't do when converting to decimal??

I need to worked out Hours worked in a timesheet. This was the easy part, the hard part is the clause tha HR threw in, which is:

If you have worked and 8 hour day WITH 1 hr lunch then you qualify for overtime.

if you work a 8 hr day and work through your lunch (1 hour) (so equivelant to 9 hrs) you still do NOT qualify for overtime there for Overtime = 0.

This is cause some people work though their lunch to get overtime, but legally they have to have a break so we are not paying overtime for it. I have basically tried in a formula to replicate this but it works with some data and not with all.

attached is an example, as you'll see the formula works in some cells, but not others.

I'm trying to create a macro that will take name values from a list (Last name, First name) and then find these particular names in a long list of names in another sheet. Once all the occurrences of the name are found, the macro would need to add up all the hours that the person has worked during a given month. For example, I have Jane Doe and John Smith on my shortlist, the macro would have to take the name of the first person, Jane Doe, find all the occurrences of that name in the second sheet that contains names, dates and hours worked, then add up all the hours worked by that person and return the total hours worked value for that parson. Then take the name of the second person, John Smith, and do the same, and so on. Is it possible to do it with macros?

View 2 Replies View RelatedIf a Rescue Officer is called out at 23:00 and is back at 04:00, this should equate to 5 hours worked.

It seems that if my times are all on one side or the other of a 24 hour cycle, my calculation work fine but it it breaks across the 24 hour (as above, it doesn't work.

A2=04:00

A1=23:00

Using (A2-A1)*24 give me -19.00 hours

My SS macro has a line:

s = (wks.Cells(c, 3) - wks.Cells(c, 2)) * 24 'calculates the duration of time worked

Is there any way of getting excel to calculate an elapsed time in hours when the start and end times roll over from one day to the next?

I'm trying to calculate the hours worked for both my day shift and my night shift.

Day shift (thanks to search ) I have managed to figure out and worked quite well.

=ROUND((E7-D7)*96,0)/4

It totals adds up the time and converts it into a decimal of hours worked.

For example Joes starts at 1100 and finishes at 1330 it returns a total of 2.5 hours worked.

However I strike a problem with nightshift.

They start in the late afternnon and work thoguh into the am.

I have used the same formula but it doesn't seem to work:

=ROUND((K7-L7)*96,0)/4

I assume because once the clock strikes 12 it's a new day and it can't work out the maths.

Lets use the example form about but make it pm.

Joe starts at 2300 and finishes at 0130 it should give me a total of 2.5 hours instead it gives me 21.5 hours

I need creating a formula that will tell me the total number of employee hours worked during a certain hour (6:00 AM) for a particular department. Some employees clock in at 6:00 AM, some clock in at 6:30. Here is the current formula I'm using which only tells me the amount of employees in the department not how many hours worked . I have three employees that clock in at 6:00AM and one at 6:30AM, the total I'm looking for is 3.5 but my formula gives me the result of 4.

C5:C1446 is a list of departments

T1503 is the 6:00 AM

D5:D1446 are the Clock In times

K5:K1446 are the Clock Out Times

=SUMPRODUCT(--($C$5:$C$1446="Shipping"),($T$1503>=$D$5:$D$1446)*($T$1503

I would like to calculate staff meal deductions for each employee based on the number of hours they worked for that day.

I have the hours listed all on one page, per day, per employee.

I have the staff meal deductions range listed on another page in the workbook.

The range is as follows: *Please note anyone working over 8.00 hours is deducted a maximum of $2.40 for that shift/day.

Hours

Deduction

1.00

$0.30

[Code].....

I want to find the hours worked in day shift and night shift. Day shift is from 06:30 to 18:30 and night shift is from 18:30 to 06:30. Listed below is an example of my date/times.

Note that the night shift carries over to the next day.

Start/Finish

21/12/09 07:00 to21/12/09 11:09

21/12/09 07:46 to21/12/09 14:41

21/12/09 12:13 to21/12/09 22:08

21/12/09 16:40 to21/12/09 18:05

21/12/09 19:40 to22/12/09 02:34

21/12/09 23:20 to22/12/09 04:39

22/12/09 02:06 to22/12/09 06:15

Is there a way to conver a persons time spent (given in weeks) to adjust/convert to show per month. Attached is the sheet. Do note that week 2/25 - 3/1 is a combination of Jan and Feb so hours should be logically divided into jan and feb...

Name 2/18 - 2/22 2/25 - 3/1 3/4 - 3/8 3/11 - 3/15 Feb mar

Tom 40 10 0 20 ?? ??

name

2/18-2/22

2/25 - 3/1

3/4 - 3/8

3/11-3/15

Feb

Mar

tom

40

10

0

20

??

??

a person works for certain hours and get paid according to the hours worked either by day or by night or a mix of both. Day payment is $8 when worked between 08:00 and 19:59 , night payment is $12 when worked between 20:00 and 07:59. The excel cell are formatted as datetime with yyyy-mm-dd hh:mm , the function works fine in getting the time information and checking whether the whole work is all day or all night , yet the if-then-else statements for calculation seems to be wrong!!

examples:

start = 2008-01-01 09:15 , end = 2008-01-01 11:40 , all day as it is between 08:00 and 20:00 and cost = 8/hr = 19.333

start = 2008-01-03 21:05 , end = 2008-01-04 02:05 , all night as it is between 20:00 and 08:00 and cost = 12/hr = 60.000

start = 2008-02-02 19:00 , end = 2008-02-02 20:05 , cost = 9.000 as 1 hour day = 8.000 plus 5minutes night = 1.000

Function prod(st As Date, en As Date) As Double

Dim shour As Integer

Dim smin As Integer

Dim ehour As Integer

Dim emin As Integer

Dim stod As String

Dim etod As String

pday = 8

pnight = 12

shour = Hour(st)

smin = Minute(st) + shour * 60

If (shour >= 8 & shour < 20) Then

stod = "day"

Else

stod = "night"

End If

ehour = Hour(en)

emin = Minute(en) + ehour * 60

If (ehour >= 8 & ehour < 20) Then.................

Lunch is not paid. Holiday and vacation hours get calculated at the regular pay rate. Overtime is anything in excess of 8 hours per day and/or in excess of 40 hours per week and/or over 5 working days per week. Saturdays for most the employees will be overtime because it will be their 6th workday of the week; but it will be regular time for one employee as it will only be his 5th workday of the week.

For accounting and payroll purposes, we need the totals to display in both hour and decimal format.

So far, I have Lunch, Regular and Overtime hours figured out, but I still need to work with Saturday, Vacation and Holiday hours. Also, currently, the time in and out has to be typed in with the colon and AM or PM. Is there another way to input the info without having to type in those items? I'm trying to make it as user friendly as possible.

I'm attempting to make a simple time sheet for a handful of employees. I'd like to enter the clock in time and clock out time for each day. The end cell should be the running total for the week. The tricky part for me is having the formula subtract an hour for each day that is over 5 hours.

View 3 Replies View RelatedI am making a schedule and I would like it to take out a 30 min break if the hours worked is over 6 hours.

I have so far

A B

1 11:00 7:30

=24*(B1-A1)

Gives me 8 hours, I would like it to subtract the 30 minutes only ifthe sum is over 6 and not alter the sum if it is under 6.

I have got a formula that can separate day shift hours from night hours, in this case night begins at 7pm to 7am, however the problem is after 12am we get into negative numbers, what formula would fix this and can be combined with the formulas below?

E10 = 19:00 or start of night time hours

B3 = start time

C3 = end time

D3 = day hours workeds =24*IF(E10

Timekeeper to tally total hours worked by employee. When doing a pivot for sum total hours worked for FY13 it does not calculate correctly. I understand they formatted that column/custom h:mm but when I change the 8:00 hours to a number I come up with 0.33 .

I am attaching a sample file : sample time.xlsx

I just want them to get a running total of hours worked/pay.

I'm trying to make a way to track if I've worked more or less than the 39 hours/week I'm paid for. At the end of each week, I have a total of how many hours and minutes that I've worked .

On column C I have what I should work.

On column D I have what I did actually work

On column E I'd like to convert automatically Columd D to minutes for calculation purposes

Column F to know if I worked more or less than what I should've subtracting C and E

Column G to have an ongoing tally to know if I need to work more or less

Column H and I could probably be the same thing. Ideally what I'd like is to have a formula pull the information from column G and put it into workdays, hours, and minutes with 1 workday being 7 hours and 48 minutes.

Since I tend to work too much, I'd like to know if I've worked 3 days too much during 1 month, I can take 3 days off the next month to get everything zeroed back to where I don't owe the company anything and vice versa.

I am trying to create a spreadsheet that auto calculates my emp. time.

However I do not want to use military time. I can get it to work by =a2-a1 but only if it is 8.5 and 17.5. Any ideas how I can do clock in 8:30 clock out 4:30 = 8 hours?

I'm trying to calculate the total hours worked for two given periods over a shift , which can span two consecutive days ie. start 15:45 and finish at 00:15 the next day. Hours worked between 6am and 6pm are paid at standard rate, whilst hours worked between 6pm and 6am attract penalty rates. Hours are cacluated in 24hr time

I have attached a copy of the timesheet that we use so you can see exactly what I'm trying to achieve, and included most of the shifts that we have.

I am creating a spreadsheet that will track hours of overtime worked and within the spreadsheet there are several separate departments listed.

I have made it dynamic so that the summary spreadsheet will update as employees are added. I’m using a macro and some complicated helper cells to be able to sort the employees based on their total OT hours worked.

Is there a function or a macro to calculate number of hours worked from a single cell value.

For example, cell A1 has "1600 - 1715" and need it to convert to "1.25" on cell B1

I have this spreadsheet and in it the time is changed from military time to regular and then I use a formula to calculate hours worked. On some of these the total is off by one minute. Does anyone know how to fix this?

I don't know how to paste the spreadsheet so you can see formulas,

I need to develop a work sheet for agency booked people to count the number of hours worked by them on daily basis. Agency can clock in at three different times and clock out at 6 different times. i tried but could not even develop logic to calculate the total earned hours. i attached the sheet for reference.

View 5 Replies View RelatedRefer to the attached sheet which is Daily Schedule for employee. I need a formula to add hours worked on single day in cell C2 for Monday, E2 for Tuesday, G2 for Wednesday, and so on.

Every day we have Clockin_Clockout info for each employee as shown for employee a & b.

FYI : I am using below formula to add employee hours for the week as (formula in cell R4).

[Code] .....

Attached sheet, I am struggling with the formula that will add up the hours overtime worked per day when I enter start and finish times.

Standard working hours are :

mon to thurs 8 hrs per day 8m to 16.30 (with 30 mins unpaid break)

Friday 6 hrs per day

Saturday all hours are overtime

Hours Commited sheet.xlsxâ€Ž

This is probably a very simple problem that has me going around in circles. I am attempting to set up a time roster, where I simply want to check:

If "end-time" minus "start-time" is greater than 4:00 (hrs), then deduct 00:30 (minutes) and place that result in another cell.

If it is not greater than 4:00 (hrs) then leave unchanged. I have read thru countless examples on the Forum - but I think that such great learning is driving me mad. Although I do believe that I have the correct format [h].mm - but attempts with IF's have got me confused. This is one of those "Looking down the tunnel towards the flickering light" moments.

i m trying to work out the productivity of employees based on how many hours they work (Time in Back Office). How many pieces of work they complete(Back Office items Completed) if 1 piece of work should take 7 mins. the item in red is what i cant seem to figure out.

View 5 Replies View Relatedto calculate how long a ticket is open in our system before being resolved. I don't want to count weekends, and if the ticket is 'suspended', I don't want to count that either. There is also the factor that the ticket 'un-suspend' date may be later than the ticket 'closed' date. Which is the bit that's throwing me.

So, I have the following fields

Ticket Open, Ticket Closed, Ticket Suspended Date, Ticket Unsuspended Date

A sample ticket might be (using above fields)

02/11/09 09/11/09 04/11/09 30/11/09

That 'should' equal two days (16 hours) as the Unsuspend date falls after the close date so it was suspended from the 4th until closure.

Now I want to know, in hours (8 hour day) how long that ticket took to resolve (i.e close), remembering you can't count the time it was suspended, or any time that fell over a weekend. Also not all tickets are suspended.

Copyrights 2005-15 www.BigResource.com, All rights reserved