I have data in column A and formula in D2 is =MAX(A1:A1)
If i enter 12 in B2 cell
....... and 5 in C2 cell formula in D2 should change to =MAX(A12:A17)
If i enter 140 in B2 cell
........and 30 in C2 cell formula in D2 should change to =MAX(A140:A170)
I tried entering INDIRECT function inputting value in B2 as A12 instead only 12 but not fully succeeded
I have a spreadsheet that has multiples ranges. Some values are displayed as negative values. I would like to create a macro that allows me to first select the range/s, (maybe using a input box) I want to change and then display the negative values as positive values.
Would I need to create a separate macro to do the opposite (change the values that are positive to a negative value)?
The other macro I’m trying to create is a similar type. What I would like this macro to do is first select the range I want to change and then divide all the cells in the range by 100000
So I found a macro that does something similar to what I need.
I tried changing the data range and input column but it doesn't work.
What the macro does is I type whatever name into the msg box and it will copy and paste all the rows that contains the name to a different sheet.
Here is the macro:
VB:
Sub test()Dim vl As String, res, sh, myrange As Range
Application.ScreenUpdating = False: vl = Application.InputBox("Enter value for Column B", Type:=2): If vl = "" Then Exit Sub
[Code]....
I have a VBA function with the header:
cubspline(Xval As Double, XRange As range, YRange As Range) As Double
The problem is that XRange (and also YRange) is in different areas of the spreadsheet. I want to combine these areas into one range which I can pass on to the cubspline function. What is the easiest way of doing it? I'm looking for something like a "union" function for ranges in Excel.
I have a spreadsheet with 5 columns. A1 to A5
Entries are made into columns A2 to A5 but only ever one entry across all cells
If an entry is made into A2 to A5 the I need a "P" to be placed into A1
I am trying to create a graph for a range of data that updates monthly (adding an extra month each time). I wanted the graph source data to update automatically each time the data is refreshed so used an OFFSET formula to identify a named range. I then point the graph to the named range as the source data.
When I enter the range as the source data the graph picks it up. However, when I re-enter the source data option on the graph it has converted the named range into a cell written range (ie. replaces "=QUALITY" with "='Front page'!$B$7:$J$10" - which therefore will not update when the range increases.
I have a list of dates in Column A, prices in Column B in Excel. I would like to write a VBA code that compares Price #31 in the list to the previous 30 prices to see if the price has moved more than 8%. If the price has moved more than 8%, I would like the date(s) that it moved above the 8% level written in Column C. Then, I'd like the routine to move on to Price #32 and have it look at its previous 30 prices and do the same.
View 9 Replies View Relatedi have 118 cells and they are changing every 10 second so, how to gather the max value from these cells and displaly them in Marquee box or in pop message?
View 3 Replies View RelatedI have an array that refers to a range of values:
Dim vtimeheader As Variant
vtimeheader = Worksheets("output").Range("e4:xfd4").Value
(1) I now want to delete all values in the array
(2) I want to apply the format "General" to all the cells in the array
I have a series of columns (L - X) each representing a diagnosed disorder (Dx), coded as binary, with 1=Positive Diagnosis (Success). The reference cell contains diagnostic codes; for each respective Dx column I need a 1 or 0, obviously. Each Dx category has a range of values (Dx codes), so I need to write syntax that reflects this range. For example, =IF(A1=>141,AND(A1=<239.99)),"1","0")
In other words, if cell value is 141 through 239.99 then return 1, else 0
Would it be something like this:
=IF(AND(A1=>141,OR(A1=<239.99)),"1","0")
I need to count the unique items in a range that don't contain the string "option". I would like not to use VBA for that but I can't make it work with a simple formula.
For now, I have :
[Code] ......
That doesn't count the cell with the content "option" and count correctly the other unique items. However I need to ignore any cell that contains the string "option" (with wildcards).
Is possible write a formula in one cell and count how is certain seasons?
I want instead criteria argument in the function =COUNTIF(range,criteria) set formula.
Instead criteria argument inside Countif function I want to use a formula on this link
Attached file : Lookup formula Date to Season.xlsx‎
I'm trying to copy and paste this formula to multiple cells and am having difficulty doing so without everything in the formula changing.. SUMIF(Bankroll!Q14:Q6000,U143,Bankroll!Y14:Y6000)
I only want the U143 to change to U144, U145, etc. Yet when I copy and paste down the sheet it changes the Q14:Q6000 and the Y14:Y6000 values as well. I've been having to go through and paste the formula one line at a time and then manually change the U143 to the current U cell that I want it to represent in order to keep the rest of the values the same. Is there a faster way than this?
I work with several dates in Excel 2007. What forumula can I put in a blank cell that would change the below "Start Date" to 3/1/12 if the date displayed is less than 3/1/12? Also, if a cell in the "Start Date" column is blank, how can I populate a blank cell with a specified date value such as 3/31/12?
ShipPositionStart DateEnd DateBoard DaysBlankMASTER2/15/2012-40953BlankCH.MATE1/22/20123/12/201251Blank2ND MATE2/29/20123/31/201232Blank3RD MATE3/1/2012-40968BlankBOSUN3/5/20123/31/201227
I’m wondering if it possible to have a variable in a Formula. I was looking around, but non of the other examples I found was working. The code I was trying is:
Sub All()
Dim lngDataRows As Long
Dim lngDataRowsSum As Long
' add sum
lngDataRowsSum = Range("A5").End(xlDown).Row
Range("A" & lngDataRowsSum).Offset(1, 0).FormulaR1C1 = "Sum"
Range("M" & lngDataRowsSum).Offset(1, 0).FormulaR1C1 = "=sum(M6:M & lngdatarowssum)"
End Sub
Another code I tried was from this thread
Sub All()
Dim lngRowsBottom As Long
Dim lngRowsTop As Long
' add sum
lngDataRowsSum = Range("A5").End(xlDown).Row
Range("C10").formula = "=sum(R["&lngrowstop&"]C:R["&lngrowsbottom&"]C)"
End Sub
The error message is: “Compile error: Expected: enf of statement” and the part “[C:R[“ is highlighted. Tried various ways to solve it but nothing was working.
Does anyone of you know how to get it up and running?
I have a column of hours spent working on a particular task, but I only want to add the hours that fall within a two week reporting period.
Is it correct to use the SUMIF formula? If so how do I write the formula to include the date range desired? Would it go under 'criteria'?
I'm using the formula =SUMIF(F18:F18,"LY",G18:G18), =SUMIF(F18:F18,"KT",G18:G18), and so on.
I want to change the range to: =SUMIF(F7:F18,"LY",G7:G18), =SUMIF(F7:F18,"KT",G7:G18), and so on.
I can do it manually, but it's 20 rows.
Is there a way where i can change the formula range on the first and copy it down, without also copying the initials, (etc. "LY") ?
If I have a formula that uses cells that are currently blank - and then run a macro that puts data into those cells - the original formula cell ranges change - even if I put $ within the ranges.
i.e.
Cell A1 has formula = sumproduct(e1:e10>10)
Currently cells E1:E10 are empty
Run the macro
E1:E10 now has data in.
But formula in cell A1 now reads something like =sumproduct(E13:E23>10) or could read =sumproduct(Ref#>10)
I have a list of 400 cells all in column A. Is there a way to have XL divide them up so that 100 are in column A, 100 in column B, etc., while still treating them like a single column (e.g. Sort will sort them all together)?
View 8 Replies View RelatedI have a single column of numerical values that may repeat many times within
the column.
I require a flexible Formula:
Use an Input Cell for the specified and changeable Percentage(s) %.
Column may be filtered – so only take into account Visible Filtered Cells.
The Formula will calculate and Return the numerical range of values that fall
between the specified percentage % (using the Input Cell) e.g.; 70%.
The Formula should Return two numeric values: a Start Value and an End Value
– NOT necessarily the minimum and maximum per se BUT the MIN and MAX of the
values that appear 70% of the time in the column; therefore, taking into
account Repeat / Duplicate values.
The calculated Results: the two numeric values will be returned to separate
cells on a new Sheet.
I am trying to multiply a range of cells by a cell reference. The cells currently have hard coded values in them. I know with past special you can multiply a range of cells by a copied #. I want a similar function to that just instead of a copied cell its a cell reference. No VBA.
View 5 Replies View RelatedAs I copy and past my lookup formula down the page it is changing the lookup range which I think is what is giving me so many #N/A results. My first Formula is
=IFERROR(VLOOKUP(A2,Coors2!A2:D3765,3,FALSE),IFERROR(VLOOKUP(A2,'AB2'!A2:C13944,3,FALSE),(VLOOKUP(A2 ,'WM2'!A2:C4843,3,FALSE))))
Then for instance at line 59 the formula is
=IFERROR(VLOOKUP(A59,Coors2!A59:D3822,3,FALSE),IFERROR(VLOOKUP(A59,'AB2'!A59:C14001,3,FALSE),(VLOOKU P(A59,'WM2'!A59:C4900,3,FALSE))))
I have a cell B10 which contains a formula.
I would like a macro which copies this formula across the same row.
However, the macro should prompt the user to select a range.
Based on the range selected and in particular the columns in this selected range, I would like the macro to copy the formula only for the columns specified in the selected range.
I'm trying to find a single conditional formula which summarizes multiple text occurrences in a range of cells. I managed to summarize the occurrences in a single cell, but my challenge is that I'm looking for a single (array?) formula for this.
I have a worksheet with column A which contains the condition and column B which contains a text field. I'm looking for a single formula to summarize all the 'AB' occurrences in the cells B4..B11 where the column A is Apple. I managed to do this by using an additional column (column C), however as my worksheet contains over 10000 rows, I would like to use a single conditional (array?) formula summarize the AB occurrences (multiple ' AB's can occur in a single cell) in stead of having to use an additional field per row.
I have attached a sheet as an example. I'm looking for a single array formula in cell C11 which summarizes the 'AB' occurrences in cells B4..B11 where column A is Apple.
I am trying to monitor the status of a cell on another sheet and autopopulate a cell depending on that information. The formula works well until I give the spreadsheet to a 3rd party and the formula ranges change after they paste new data to the source sheet. I have tried locking and password the formula cells but they change range regardless!
Here is the formula from the first cell.
[Code] ......
It scans for a number in an adjacent cell. If the number is present on the sheet 'Test', it autopopulates the cell with a string from the source sheet. The cell remains blank until there is data present.
If I cut data from row 6 and paste it to row 17, the formula cahnges itself to:
[Code] ........
How I can lock down this formula so that the ranges remain the same i.e. $AT$6:$AT$26, despite changes on the source sheet? I have tried F4 to toggle relative and absolute references and this has made no difference.
1 workbook, 2 worksheets (or tabs). On tab 1, I want a formula/alert that tells the user if any duplicate values exist in Column A of tab 2
Tab 2, Column A, has Unique ID's (6 digit numeric values)
The user manually inputs the ID's on new rows in Column A
Row 1 is reserved and in use for something else
Row 2 is my header, so cell A2 says "ID"
Row 3-623 currently contain unique ID's
When the user inputs a new ID into cell A624, then they return to Tab 1, I want my formula/alert on Tab 1 to tell the user that they have duplicates in Column A of tab 2. I know the Conditional Formatting, but if the user copies in 100 new values, they won't necessarily see the highlighted cells. My tab 1 is my "checks and balances" and the last place the user is suppposed to look to ensure that they haven't created any duplicate ID's. If the user sees a warning message that says duplicates exist, then I'll tell them that they need to look at column A (for cells that have been conditionally highlighted).
One issue that I'm running into with the conditional highlighting is that I want cells A3:A1048576 to already have the conditional formatting - this way when the user inserts a value into Cell A624, then A625, etc they conditional formatting is already there. Right now with data in cells A3:A623, cells A624:A1048576 are all highlighted with the Red/Bold Red Font (which is okay I guess), but ideally it would be nice to not count 2+ empty cells as duplicates and I'll have to have my formula on Tab 1 not include the blank cells.
I DO NOT want to use the Remove Duplicates feature of Excel 2010. If I remove them I could be removing data in columns B, C, D, etc that belong to the Unique ID. I just need the user to be told in Tab 1 that they DO have duplicates and I'll train the user how to research this and fix it.
The reason I want to look for duplicates in the entire Column A is because the list of Unique ID's will grow over time.
Is there a way to change a line of vba code using an input box?
The current macro downloads a file from our intranet. However the filename changes each week. It is only the last portion of the filename that changes since this part is the date it is created. e.g filename010507.xls filename090507.xls
What I want to do is for an input box to pop up, the user then enter the date and this will then replace the existing filename in the code with the new date.
If I have, in one cell (call it D1):
EH,DR,HU
and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E
I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...
eg...
F,G,H
This may have been answered on here but can not seem to find it. My situation is I have values in A1,A2 & A3 that are like counter reading so the value is always changing. What I am looking to do is change the cell color if one of the values is over 500 from the other two values. Say A1 is 3000, A2 is 3250 and A3 is 3500. I would like the cell for A3 to change color.
View 2 Replies View RelatedI'd like to be able to drop one table of data into a workbook that already has sheets of two or more master tables, and two or more report pages. A formula on the report pages would compare aspects of the data to the master tables, and report the data on the correct sheet based on certain criterion. The reports would not have blank spaces, need to be sorted further, etc.
My initial impulse was to think in terms of ol' verable VLOOKUP, but I can't figure out how to get the report formula to move on to the next line of the data table if it doesn't find a match for the first line - short of adding another VLOOKUP (and another, and...), which is totally impractical given that the data table will likely have 20,000+ lines.