Compare Multiple Fields For Data Range

Jan 25, 2014

I'm doing a study of wind turbines, which are spread over a test field. There are 6 turbines, each checked once a day and produces a value. I look up what the weather man says it should be, "Reported" field.

Compare141622263647

DayWind1Wind2Wind3Wind4Wind5Wind6Reported
2872 6918243519
2867122327303133
2854111324324619
28422232527284624
28319233136454627
282411182841448
2819121622264814
28016242530344549

The "Compare" field values must match all values for each turbine. The speeds identify the location with the best match speed against output of power generated. As each value in "Compared" is the best speed for that type of turbine.

View 4 Replies


ADVERTISEMENT

Programming Multiple Inputs With Multiple Data Fields

Feb 19, 2009

I am trying to set up a "diet log" for my nephew to track his eating habits for a school project. I am trying to make the "total" section of the attached spread sheet auto calculating depending on the information placed in the "breakfast / lunch / dinner / snack" catagories. I have two worksheets in the file. The first being the preferred method of a single cell and seperating the items using only a ",". The second sheet has a little bit different lay out which I don't think will work as nicely.

Honestly, I am not sure if this will even be possible, but I figured I would try here as a final resort. Currently there are just some sample foods in there as I will let him fill in the actual workbook for his use.

View 7 Replies View Related

Multiple Data Validation Across Multiple Fields?

Jul 23, 2012

I have a spreadsheet setup like a timesheet: Employee Name, Classification, Rate, etc.

I setup the Employee Name field as a drop-down. Since there are numerous employees with different rates, I want to just select a name so that the other fields fill-in with the appropriate rates.

View 1 Replies View Related

Convert Column Data Fields To Row Data Fields In Pivot Table

Feb 8, 2014

CountryHourDataTotalData
Austria - A10Sum of SeiA51CountryHourSum of SeiASum of SeiT
Sum of SeiT4.88Austria - A10514.88
1Sum of SeiA561562.83

[Code]....

left side pivot created in vb 6.0 & right side pivot table created manually in excel.

i want to generated pivot table using vb 6.0 same as right side pivot.

Set PRange = ws1.Range("R1:Y" & finalrow)
Set PTCache = wb.PivotCaches.Add(SourceType:=xlDatabase, SourceData:=PRange)
Set PT = PTCache.CreatePivotTable(TableDestination:=ws2.Cells(1, 1),

[Code]....

View 2 Replies View Related

Extracting Data From One Worksheet To Another With Multiple Fields To Populate

May 1, 2013

I have a table of data from which I would like to extract the information which is listed horizontally.

Column A Column B Column C Column D
Code Name Address Locality
SMITJOHN John Smith 123 Bell Rd Perth

On the 2nd worksheet I have a form which I have designed to which I would like to extract the information from the 1st worksheet.

I am hoping that it is possible to start entering a code based on some reference on the Name. Eg SMITJOHN

Once the code is true or correct it will populate certain cells on the 2nd worksheet automatically.

I work in transport and am looking to streamline some of the paperwork and am trying to do it within the means I have available to me.

The format of the 2nd worksheet is;

CODE: SMITJOHN
NAME: John Smith
ADDRESS: 123 Bell Rd
LOCALITY: PERTH

View 3 Replies View Related

Select And Copy Multiple Columns Based On 2 Data Fields

Feb 20, 2014

I have a spreadsheet with a heap of raw data in it. I need to perform a search based on a customer name, then return certain columns from the raw data IF the customer name is matched in one column, AND a special flag name is matched in a second column. The customer name is always a single entry for the purpose of the query, however the special flag must be checked against a possible list of values in a table. I know this is hard to explain, and I can't add attachments to my posts, so I have created a sample document and placed in in dropbox:

[URL] ........

View 9 Replies View Related

Using INDEX MATCH Formula To Compare Two Fields

May 6, 2014

I am trying to compare two fields using the INDEX MATCH formula. One field needs to match exactly and the second field should return the closest match to a date. I have attached an example where I am trying to find the closest production date (column F) for the matching ID that is before the complaint date.

View 8 Replies View Related

Excel Macro - Deriving Fields Based On Multiple Rows Of Data

Dec 4, 2012

- The macro should then try to find this data on the worksheet "Sheet2" in the same workbook. This data on Sheet2 is essentially a table with four columns "Number" (Col A), "Country" (Col B), "Consol" (Col C) and "Bypass" (Col D) but can have around 70k rows

- It should look for Number first, and if its not found, the macro should insert the message "Update OK" in cell A8 on Sheet1

- If it finds at least 1 row for the Number but the Country is the same for all the rows and it matches the value input for Country on Sheet1, then it insert the message "Multiple Records - Update OK" in cell A8 on Sheet1

- If it finds at least 1 row for the Number but the Country is the same for all the rows and it does not match the value input for Country on Sheet1, and if all Bypass fields in Sheet2 have "Y" but the Bypass field input on Sheet1 has "N", then put "Multiple Records - Update OK" in cell A8 on Sheet1

- If it finds at least 1 row for the Number but the Country is the same for all the rows and it does not match the value input for Country on Sheet1, and if all Bypass fields in Sheet2 have "N" but the Bypass field input on Sheet1 has "Y", then put "Multiple Records - Bypass - Do Not Update" in cell A8 on Sheet1

- If it finds at least 1 row for the Number but the Country is the same for all the rows that have a Bypass value of "N" and it does match the value input for Country on Sheet1 then put "Multiple Records - No Need to Update" in cell A8 on Sheet1

- If it finds at least 1 row for the Number but the Country is different for all the rows that have a Bypass value of "N", then put "Multiple Records - Refer" in cell A8 on Sheet1

[URL] ....

TestBook.xlsm

View 6 Replies View Related

Test/Compare Pivot Table Fields Macro Code

Apr 24, 2008

I wrote a macro for a pivot table.

Range("A1").Select
ActiveWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:= _
"Export!R1C1:R3000C53").CreatePivotTable TableDestination:="", TableName:= _
"PivotTable4", DefaultVersion:=xlPivotTableVersion10
ActiveSheet.PivotTableWizard TableDestination:=ActiveSheet.Cells(3, 1)
ActiveSheet.Cells(3, 1).Select
ActiveSheet.PivotTables("PivotTable4").AddDataField ActiveSheet.PivotTables( _
"PivotTable4").PivotFields("Reference"), "Count of Reference", xlCount
With ActiveSheet.PivotTables("PivotTable4").PivotFields("ACN received date")
.Orientation = xlRowField
.Position = 1
End With

What i want to know is if there is a code line to test if "Non Processed" value exists in column "Status" and then hide the value.

Now, if the macro does not find one value just gives me error.

View 7 Replies View Related

How To Compare Multiple Values Including TIME And Compare Rate

Feb 21, 2014

Basically I have two sets of data. One will be new each week. I'd like to use the non-changing data as a base to compare new data to. The formula would need to match multiple values, including a 'time between', and then return whether a minimum rate has been met.

SampleRateExamine.xlsx‎

View 3 Replies View Related

Time Range Formula - Compare Data From Cell A To B

Jun 27, 2014

I have two Date range in different cell and I want them two return "TRUE" value even if the start time or end time of another is earlier or later by 1-2 hours:

Example: I want to Compare Data from Cell A to B. Values should return True as it is within 1-2 hour range.

A1
B1
C1

10:00-20:00
08:00-17:00
12:15-21:15
13:45-22:45

View 4 Replies View Related

Compare Serial Number And Copy Data Range

Aug 2, 2006

I need to compare a S/n from a huge amount of datarows in sheet 1 with the s/n in a second worksheet.

If the s/n matches i need to copy the datarow from sheet 1 to sheet 2 next to the data allready existing in sheet 2. This removing the row from sheet 1.

If there is no match found in sheet 2, the row ha's to be copied to sheet 3, this also removing the datarow.

like:

sheet 1:

S/n -- name -- price

sheet 2:

S/n -- place -- stock

if match is found need to become:

S/n -- place -- stock -- S/n -- name -- price

if there is no match found data go to sheet 3.

View 5 Replies View Related

Single Column With Multiple Rows Of Data - Compare Names

Apr 12, 2012

I have a single column with multiple rows of data like this: Afirst last, Bfirst last, Cfirst last (all in one cell) etc.

I want to type some names in one cell in the same format (Afirst last, Cfirst last, Bfirst last) but not order and then check if any of those names exist in the first column and count the results of matches.

So in this example I am looking to count Bfirst last and/or Cfirst last in every cell of column A. I need to use a formula.

View 2 Replies View Related

Populating Fields In Multiple Cells Based On Criteria In Multiple Columns?

Feb 24, 2014

Im struggling to find a formula to populate cells based on values to be checked in two fields (ICODE, COMPANY) as shown below.

In the example here, all records where ever the ICODE = 49, i need to populate the fields(columns) AD1,AD2,AD3 or AD4 with the product name of the same company where the ICODE <> 49. There could be between 1-7 products per company.

CURRENT SHEET

ICODE PRODUCT COMPANY AD1 AD2 AD3 AD4
89PENS ABC STATIONERY CO LLC [code]....

The attached example file may be a better alternative to view this problem.

View 2 Replies View Related

Compare Multiple Column Of Data And List Out Common And Unique Component In Adj Columns

Jan 23, 2006

I am trying to compare multiple column in a worksheet to find
common component in all the columns and what is unique to a particular
column only. And list the results/finding in adj column. What i am
trying to accomplish is something as below.

BEFORE
Sheet1 Sheet2 Sheet3
Column2 Column2 Column2
02-1234-12 07-1234-12 02-1234-12
04-1234-12 03-1234-12 02-1234-12
05-1234-12 02-1234-12 06-1234-34

AFTER
Common to all Unique to sheet1 Unique to Sheet2
02-1234-12 05-1234-12 07-1234-12

View 14 Replies View Related

Using The Same Header In Multiple Fields

Apr 25, 2014

So, I've created a pivot table and need to use one of my values in both the row and value fields. I haven't seen a way to easily do that so far. Is there something I'm missing or is this not possible with Excel (yet)?

View 3 Replies View Related

Searching Multiple Fields

Sep 27, 2009

I am fillin out a spread sheed with a num ber of codes. I want to create a excel formula that will look at the entire column and search for each of the codes. If I have forgotten to add one of the codes into the column I need the formula to let me know.

What I was thinking might work is this...

To look for one of the codes I would do this.
=IF(MATCH("FLA",E5:E36,0)>0,TRUE,FALSE)

This works great if the Value is in there. If it is not in there I get #N/A instead of FALSE. Is there a way to get the MATCH to return another value if it is not found in the range?

Is there an easier way to look for multiple values? So far the only solution I have found is like this

=IF(LEFT(Q19,1)="D",7.5,IF(LEFT(Q19,3)="FLB",7.5,0))

For each value I need to look up I add another IF function. I have about 17 different values I need to look for. This makes for a ugly function but it seems to work.

View 9 Replies View Related

Match Multiple Fields In Records

Aug 6, 2009

I know how to see if one value exists in an arrray, but is there a way to see if a combination of fields in one array exist in the same combination in another array?

In other words, if I have table A:........

and table B:......

I would like to add a column to table B containing a function that would indicate, in this instance, that only Larry-San Francisco, CA is a record shared by both tables.

View 3 Replies View Related

Finding Best Combination Of Multiple Fields?

Dec 14, 2012

The goal of this is to find the best combination of a captain (out of 5 possible choices), 5 crewmates (out of 25, no repeats), deck items (2 items, can be repeated, 20 total options), ram (1, out of 13), hull (1, 13 choices), and rudder (1, 7 choices)

Each choice in every category has 4 attributes - fighting, morale, seafaring, and speed. The ship parts also have a true/false field called "unlocked" - the false fields obviously can't be chosen.

A mission gives numbers saying what total attributes are needed for a 100% chance of success. If the mission has 2 attributes that are required (say seafaring and fighting, for instance) then it takes whichever chance of success is lowest and counts that as the mission success chance.

Example: A mission requires 2000 fighting and 2000 seafaring - I can reach 2000 fighting but 1500 seafaring, chance of success is 75%. It would be better for me to get a combination that gave me an 87% success rate in both fields.

How do I have excel go through every combination (and is that even plausable? I would imagine that being in the billions of combination choices) and highlight (turn a cell green or something) the combination that has the highest minimum chance of success in all fields?

View 2 Replies View Related

Display Multiple Fields In A Combobox

May 15, 2008

If i have a multi-column combobox, how can i show all my columns in the display window after clicking on an item in the dropdown list? At the moment, only the first field will display :s (also, preferably keeping my first field as the 'value' property!)

View 9 Replies View Related

Uppercase In Multiple Fields Using Ucase

Jun 1, 2006

i have a form that i have 2 fields that need to be capatalized at all times - B6 and G6 I have used this formula to get B6 to work but for the life of me i cant get BOTH to work and the same time.

here is the formula

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Set Target = Range("B6") 'change to your range
If Not IsEmpty(Target) Then
Target = UCase(Target.Text)
End If
End Sub

View 3 Replies View Related

Match Multiple Fields In A Row Over Many Rows

Mar 9, 2008

I have 4 colums of customer input data, Length, Width, Height and Quantity. There are over 20 rows to accomodate multiple combinations. I have several other hidden pricing pages with all possible combinations including materials, pricing etc. Assuming I am on the frst pricing page and first combination I need a formula that will match the first 3 inputs per row and if true give me the 4rth input for the matching row.

Example:
Customer input-
row 1 = 8 - 12 - 4 - 15
row 2 = 4 - 4 - 2 - 25
etc.

Order Page-
Combination 1 = 4x4x2 quantity___ (input row 2 matches 4-4-2 give quantity 25)
Combination 2 = 4x8x2 quantity___ (no input row matches 4-8-2 give quantity 0)

Combination 36 = 8x12x4 quantity___ (input row 1 matches 8-12-4 give quantity 15)

View 3 Replies View Related

Copy HTMLTextArea Value Fields Into A Range

Dec 31, 2008

Using Excel 2007, how can I copy several HTMLTextArea value fields into a range?

View 9 Replies View Related

Pivot Table - Add Multiple Fields To Values Tab

Jan 3, 2014

I was wondering if it were at all possible to add multiple columns to the values portion of a pivot table at once, instead of individually dragging. When you click on them, it auto-sends them to Row Labels, which I don't want. I have a bunch of colums I want to add to Values and don't want to waste a bunch of time dragging them individually.

View 2 Replies View Related

Sum Of Non-sequential Fields Meeting Multiple Criteria

Nov 2, 2011

I would like to sum fields IF the STAFF Name is the same AND the PROJECT ID is the same...

I have included sample data below:

Example: Sum the total TIME for GRIFFIN, TROY for PROJECT 1 (1 row). Separately Sum the total TIME for GRIFFIN, TROY for PROJECT 2 (2 rows).

When this sheet goes live there will be hundreds of rows with many instances of the same project id and same Staff name.

Project IDStaffTimeInt AmtExt AmtInt TtlExt TtlTask SavingsTotal Project Savings1Griffin, Troy2.25$30.00$60.00$67.50$135.00$67.508501Harvey, Deborah1$30.00$60.00$30.00$60.00$30.001Johnson, Lenworth6$30.00$85.00$180.00$510.00$330.001Kelley, Marijane6.5$30.00$95.00$195.00$617.50$422.502Griffin, Troy12$30.00$60.00$360.00$720.00$360.008702Griffin, Troy17$30.00$60.00$510.00$1,020.00$510.00312$45.00$55.00$540.00$660.00$120.00240

View 3 Replies View Related

Importing Excel With Multiple Fields In Same Column

Nov 28, 2011

I want to import an excel file that has multple columns, however, the first column contains both the Group name and the dates. Is there a way to import this into a table to have each record populate the group to the corresponding date?

BASE Researching Duplicate
11/23/2011 21

E-Team General Pool
11/23/20112120
11/25/20112318

General Pool for SB Activations
11/23/2011429418
11/24/2011251125
11/25/2011485452
11/26/2011452410
11/27/2011415408

View 2 Replies View Related

If Multiple Conditions Exist Then Combine Text Fields?

Apr 1, 2014

I am trying to build a list of account numbers based on conditions in a spreadsheet. Every account number will look like: XXXXXX-XXX-XXX, depending on if there is a 'Y' in both fields...see attached. I am desperate to get this done and have hit a complete road block.

View 2 Replies View Related

Reset Pivot Table Fields In Multiple Sheets

Aug 28, 2008

I have pivot tables in diff pages
im trying to make a button to reset all the fields in all the pivot tables..

i tried recording a macro to do this but it only works for page fields..
it wont work for the column fields.. act, adopt and check are page fields at the top... region is a column field ... goto_AQcheck is a macro to switch to that sheet which is assigned to another button....

this isthe code it gave:

View 13 Replies View Related

Linking Pivot Tables - Multiple Page Fields

Feb 16, 2010

I have two pivot tables on one sheet and I want the page fields on the second to change when I change the first pivot table. I found the below code and have applied it to one of the three page fields I have, but can't seem to duplicate it for the other page fields:

View 7 Replies View Related

Converting Single Address String To Multiple Fields

Jan 11, 2007

I recieve a spreadsheet each month with the following column of data:

9 Paddington House
PO Box 73
Whiteleys of Bayswater
9-10 Grove Road
134/138 Drymen Road
44-46 The High Street
1 Midland Road
48 Donegall Place

As you can see, it consists of addresses, each line is a separate address. I need it to be converted so that the data is split into the following 5 fields:

Street number from
street number letter from
street number to
street number letter to
street

If there is no street number , then it should just enter the data into the street field. If there is a range such as 44-46, it should enter the 2 numbers into the from and to fields. Sometimes this is in the format 44/46. Also, sometimes there are letters, eg 44a-44b, in which case each section (ie 44, a, 44, b) needs to be in a spearate field.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved