Basically, need to count rows that have 5 columns of data in it. If all 5 columns within a row have something in them greater than one character, that row needs to be counted.

In my spreadsheet I have several columns and I have written a formula that has two conditions. If these are met the result is counted. However I want to add another condition. I need to write a formula that displays information relating to the conditions in a cell if the other two conditions are met. For Example, if the formula picks out that a row has the word 'John' and has the a number between 1 and 14 it will copy the inputted data at the beginning of the row.

I have a filtered list of data expanded to "all" in each column. One column is "percentile" (25%, 50%, 75%, etc).

Search down the "percentile" column until you encounter 25% as an entry, then sum a number in the same row from a different column with each 25% entry you find.

need a formula to calculate the total number of x's in one column (column B, C, E are training types= x) where the corresponding column date falls within a date range. It’s to total each type of training done for each month. I have 3 training type columns and a cell that calculates the total number of trainings for the each month:=COUNTIF(F2:F100,">="&DATE(2008,2,1))-COUNTIF(F3:F200,">="&DATE(2008,2,31)). So now I just need it broken down by training type per month. How many x's in each column for February as an example.

I attached a spread. On the data tab, I have 2 criteria that I would like to use to move rows to another sheet. Columns U and W. An example would be that all rows that have a coil in Bay "B" and are allocated would go on the "B Allocated" sheet. I would also like this to automatically update when I delete the data in the data sheet and put new data in.

I would like to pull all rows and columns from a table and copy them to a separate sheet. I would like to pull the data if a certain value is present in a particular column. Essentially, it is the same effect of filtering the data but I don't want to have to keep filtering and copying specific cells and pasting them into a different sheet if I need to change the raw data.

Example: I would like to copy all ids, store, and partner information IF the partner is "X". I would like to put this information in Sheet A.

I have a spreadsheet with 3023 rows and columns A-L. Here's a small sampling of Column A (with heading "sku" included, copied exactly as it appears in the spreadsheet):

A sku 3102-0400-100000 3102-0400-200000 3102-0500-100000 3102-0500-200000 3102-0600-100000 3102-0600-200000 3102-0700-100000 3102-0700-200000

I need to delete every row in which column A includes the text "200000".

Although the above sampling shows "200000" appears in every other row, that is not the case in all 3023 rows.

I have a spreadsheet which contains data for crime incidents occurring in a month. I have created a worksheet which uses "IF" statements to pull in data that occurred within the last 24 hours only. I would like to create a report that can be printed which has a crime category and lists all the incidents for that category below that occurred during the day. The issue I am having is that all "IF" and "LOOKUP" statements are line for line and I want to be able to skip blanks or where it is not the category in the title.

I have a workbook with many (25) worksheets which all have the same structure, column headings, etc. but vary as to the number of rows. I would like to search all worksheets in workbook and copy to worksheet "120" only those rows where column C is "120" and column E is "1-00053-".

Ideally, input boxes would be used to enter these criteria so that it can be used for different scenarios in which these values will vary.

I have a file with many intercompany transactions. There is a range of business unit numbers that if anyone one number is in both Column B "Bus Unit" and Column E "Affiliate" I want the row deleted.

Please see the attached, it is more clear I hope. The two yellow rows would be deleted. The list of business units that I would want to never be on the same row is "4, 7, 41, 44, 46, 51"

I am looking for an Excel VBA code that can delete pair of rows that has certain criteria. I have included an example in the attachment and highlighted the rows that should be deleted. Since the values in each coloumn is going to change every day , I am looking for a dynamic code.

The objective is to:

To delete rows that has same code (columnd D), same basis (coloumn E), same Effective (coloumn H), value of TT (Column J) is either TI or TO and has offsetting Amounts (L) ie the sume becomes zero. Example pair of row 7 and row 8 as well as pair of row 12 and row 13 should be deleted.

TO and TI are actually transfer in and transfer out. Since the TI and TO for these rows make the amount zero for same code and same basis on the same effective date, I do not want to include this in the spreadsheet.

Here is what I have. 4 Worksheets. The first worksheet is a summary page. I have 350 personnel that are broken down into three different groups. So each group has it's own sheet. Here is what I need to accomplish. Results need to be posted on the summary sheet.

I need to compare cells B2 & D3 for each row on a worksheet and display the number of times they match on a worksheet. For example how many times does EP & EP match on a certain row. I need to compare cells B2 & D3 for each row on a worksheeet and display the number of times they don't match on a worksheet. For example how many times does EP & MP occur. I've attached an example for reference

I have a sheet of data. The data starts in row 4 and can be variable in length. I want to delete rows that do not meet a specific criteria, for example a location, Leeds, which is in column "i" of the table. I have written the below but it seems to delete data from row 1 rather than row 4 and repeat down each row

Code below

Sub deleterows() Dim i As Integer Dim intCounter As Integer Dim strLocation() As String

p = Range(Cells(4, 6), Cells(4, 6).End(xlDown)).count

I have a range of data and need to summarize some of the data. In the table below is an example of the data. I would like to have a single formula where I can count the number of rows where the end date - start date is < 14 days. I would prefer not to add an additional column for the datediff value. Is there a way to do this with either arrays or named ranges?

Name Start End Other data Verizon 1/10/2010 1/25/2010 AT&T 3/2/2010 4/14/2010

I would like to perform a search on only the worksheets listed in a worksheet titled table of contents. I would like to use multiple criteria for this search and send only the unique results to a worksheet titled results. Each worksheet listed in the table of contents has a cell address for each heading that I would like to extract data from the same column. The attached workbook example shows the data that I would like to collect when I search for cells that begin with "AB" and cells that begin with "CD". I collected this data by copy and pasting all the data from each worksheet into the results page and then applying filters and advanced filter to remove duplicates. This method does not work well for the original workbook as the data is quite extensive.

I have a spreadsheet that is set out to look similar to a MS Project plan, with dates across the top, users in column A and Assignments in column B. In the corresponding cell that matches the user, date and assignment they will enter the number of hours they anticipate working on the assignment.

I then have a summary sheet that covers all assignments, week ending dates and users. I want to be able to calculate the hours and copy it into the cell in the summary sheet that matches the Day, User and Assignment. I have tried using SUMIF, but this requires the criteria cells to all be in columns, but with this sheet the dates are in a row.

I have built the following code which should look through a data sheet and then work out the instances where it meets the following criterias:

= "Client A" = "First letter of surname is "a"

The code is as follows:

Public rowcn Sub compare() Dim rngTemp As Range Dim intCounter As Integer loop_col = "Client A" data_sheet = "Data" target_sheet = "Summary" rowcn = 2 Do.............................

Aim - Extract every word after: and before , and put them in the appropriate headings

I have attached my desired results in column B - E. To calculate the answer, the heading of the tile is normally just before the : Meaning the Answer is after the : and before the ,

On the attached example i would like a formula in F2 which sums all the values where column equals "Smith" and column B equals "Golf European". I'm assuming it would involve the SumIf formula but i'm not sure if this is the best solution when the criteria is in two columns?

I have a spreadsheet that has employee name and average hours worked.. The employee is listed multiple times because each row represents a pay period with number of hours worked. the last column I used to average the hours worked. So what I need is whenever there is a value greater than 30 in column g, I need to copy the row where column G has a value. It can be copied on the same sheet or on another.

I am trying to use this function to figure out averages for tests. there can be up to 25 tests in the sheet which is where the "YES" comes in. If the test booklet was used for this class then YES will be placed in the cell in field B2:B26.

Now thes issue I'm having is that the formula is doing the math for the fields C2:C26 if there is a number in them if there is even if it does not say YES in the B2:B26 field.