User of Excel in Office 2007. However, I for statistics about how my Bitcoin Device's works and decrypts Bitcoins per day for trends and statistics, and so on
Now while I was away so had the power gone, and for almost 24 hours so stood all still, I would now like to outline in red the date / dates where I have zero or very low running time for specific date, but I can only change Fragen for all dates, not individual dates.
The stack's not exist in the data value is equal to zero (null) where by I want to be able to get the date in red color, and possibly also in bold. see print screen below.
I work for a UK charity and have a list of funders in an Excel 2007 spreadsheet.
One of the columns refers to the date on which a new application for funding can be made to that particular funder.
In many cases new applications for funding can't be made for 1 or more years since the last application - sometimes as many as 5 years later. How to get a cell to refer to the date that it contains.
For example, say I have in cell A1 "The Acme Funding Organisation" and in cell B1 (i.e. the "Reapply when?" column) a date of 01/04/2013 (British date format, i.e. 1 April 2013) then what I want Excel to do is to look at the date in cell B1 and if that date has been reached to highlight the cell red. That way I'll know that the reapply date has been reached & that a new application can be made.
Using excel 2007. In a A table of marks obtained by a student. I want to get the content of the cell be displayed in a bigger font and in a particular color when i point to it. When I point to a cell content the display should be in a color of my choice say green and the font be greater than 20 pixels.
I am building this waterfall chart. I'd like to put conditional color formatting to change the vertical bar automatically e.g. if it is positive, the bar color is green and if it is negative the bar color is red.
I am trying to use VBA in Excel 2007 to change bar chart series colors. I have found a few posts that link it to a cell background, but I'm struggling to find one that does the font color.
It would be great if I could change the bar chart series to match the color of the text in the A column, so that if I highlighted the value in A1 and changed the text color to orange for whatever reason, the chart updates the value of 1.2 to an orange bar (see below).
I have two columns. The first one (A) contains cells that have different Fill colors. The second column (B) contains text adjacent to the colored cells. I am trying to change the color of the text in the second column (B) to the corresponding color in the adjacent cell in the first column (A). I don't think conditional formating works well in this situation. I believe the solution would be some sort of macro.
Is there a way to create a macro to color code a cell based on the value in a cell, and then look up a value in a table, then color code it based on where it fits into the table?
I have a table of values for about 30 projects. In column g - there is a CPI value (see bold column)
Example: Project ID Name Program PMT SI ID AC Milestone TCP Level [Code] ......
Here is the table:
I have to color code a cell, base on the CPI and how it fits into the table below. So if the current Milestone is M2 or M3 and the CPI calculated is .14 the cell would be colored RED, if the CPI number is 2.01 for M2-M3 I would want cell to be colored Turquiose. If we were at Milestone M6 and the CPI was 2.01, it would be colored blue. If the CPI was .75 at Milestone M5, it would be colored Green
I have attached an example file.. Basically I want the text in a range to change to red if one cell="Description".
Also, I want a cell's text to turn blue if it's corresponding data in the row says "Click on Title to Follow Link"
The example file explains it a lot better..
Thanks for the help.. Sorry if this may seem like a duplicate post but I was not able to get any of the examples I searched for to work that others have posted.. Also, maybe conditional formatting would be an option here but I could not get it to work as it will only meet the first condition that comes across thats true...
I wish to monitor a change in a certain columns at some worksheets. I have - after having consulted John Walkenbach' fantastic book Excel 2007 Power programming with VBA - understood how I do to monitor a change in specific worksheet, by using the Intersect-function in the change-event on that particular worksheet. That works fine.
My situation is that I have an application that I start out with a certain number of workheets in a workbook, and in the course of the work that the application does, it now and then adds worksheets, and these worksheets I would like to monitor for change in a special column. I know, by looking at the names of the worksheets which ones of those in the collection that I want to check.
I therefore used, not the Worksheet_Change event but the Workbook_SheetChange. It doesn't work quite well. I guess my question for now would be:
The call to this event looks like this:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
1) How - in what way - should I use the first argument, the "Sh as Object"? Can I/Should I give it a name?
The error message I get when I use an instruction like this:
If Not Intersect(Target, Range(M:M)) Is Nothing Then 'Do Stuff end if
The method 'Intersect' in the object '_Global' failed
I want to be able to change a color of one cell according to color of another cell. suppose, cell A1 has text "apples" having red color. Now, if I enter text same as A1("apples") in another cell, say B1, then color of text entered in cell B1 should be red. I am using Excel 2007
I have a field with a "YES"/"NO" drop-down box. There are three fields below which have some default formatting (thick purple dot-dot-dash borders). When the drop-down field is "YES", those three fields should change borders to a single thin black bottom border line.
OK... so that's the setup. And I should note here that it does in fact format properly. However, the problem I'm having is that the screen does not update / repaint with the new formatting. The thick purple dot-dot-dash borders remain, for the most part.
If I page down, then page back up, the new formatting appears just fine. When I switch from "YES" to "NO", again, the formatting changes, but the screen does not update/repaint so the only way to see the new formatting is to again... page up and then page down again.
I'm wondering if anyone knows a way to force the screen to repaint/update so that my users will see the new formatting without having to page up/down.
This is probably elementary, but I'm struggling and would appreciate any help as I have very little excel VBA experience to draw from.
I have assembled code which changes the cell color based on a value change in Column A. Column A will contain many different groups of repeating values. This code works well and and I have been able to figure out how to limit the number of colors to only 2. The end result is each set of similar values in column A is visually grouped by one of two alternating colors.
The number rows in the data set is variable as the data set is extracted from SAP. The number of columns is fixed.
What I want to do now is set the cell color in columns B through F the same color that was assigned to the row in column A. So if cell A3 is set to colorindex = 6, then I want to set the range of cells B3 to E3 to the same color.
Here is the code I am using to set the color of the cells in Column A:
I have a spread sheet and I want to conditionally format rows to be a certain color. That part I'm fine with. But I don't want them to be a set color. I have a "key" of different colored cells that I want to be the fill colors of the formatting. The ultimate goal is that for example the key looked like this
red blue yellow green
then the rows I had would be formatted as red, blue, yellow, and green. But if you were to go into the key and change the first cell from red to purple, then the rows would become formatted as purple, blue, yellow, and green. Obviously I can copy formating by hand using the format painter, but I want it to update automatically.
I'm trying to set up a spreadsheet to track 20 vehicles mileage, and when they are due for an oil change. I have the value of when they are next due in column D, and the actual mileage in column G. I want to have the row for each vehicle turn yellow when they are within 1,000 miles of needing an oil change, and red when they are due/overdue.
I have been trying to figure out how to change the color of a specific tab based on information being entered in cell "B9" for each sheet that the tabs represent. If there is information in cell B9 on "tab 1", I want only tab 1 to change a color. If there is no information entered in cell B9 of tab 2, then I want tab 2 to stay with its default color.
There are 34 tabs I want this to happen to, out of just more than 60 total tabs on the worksheet.
I'm trying to change the tab color based on a cell value. This I can do, but only using a Change Event with code in the Worksheet section. I would like it to update more instantly and without the need for a Change on the sheet to occur. So I was thinking a Worksheet_Activate event, or perhaps a Workbook_Activate event, but i can't get it to work.
For further info, if not confusing, the cell referenced in code below (on the Dan sheet) is filled using a user entered variable when the workbook is opened. Depending on this value, i would like the tabs to update their color accordingly and instantly, as well as the color updating if the cell B3 on the sheet is changed. Perhaps I need a Worksheet Activate & Deactivate and Workbook Activate and Deactivate?
Public sPeriod As Long Private Sub Worksheet_Change(ByVal Target As Range) sPeriod = Worksheets("Dan").Cells(2, 4).Value If Target.Count > 1 Then Exit Sub If Target.Address(False, False) = "B3" Then Select Case UCase(Target.Value) Case sPeriod - 1: ActiveSheet.Tab.Color = RGB(0, 0, 255) Case Else: ActiveSheet.Tab.Color = RGB(255, 0, 0) End Select End If End Sub