I am looking for a creative way to display a pie chart within a data point marker of a line chart.
My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2) these are recorded per day (Date, in Column A)
I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.
I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.
The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)
the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.
I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.
I have been trying to chart temperature differences over 10 day's time for six cities using a line graph. For some reason, the lines are all clustered at the bottom of my graph, with values of 0. My spreadsheet is accurate, without any blank cells. I'm using Excel 2010.
I have been given a task to create a line graph who has 10 categories and each category has 5 different values. I need to plot a line graph, so that those 10 categories should appear on the Y-axis instead of X-axis.
I am trying to create a line graph to show the trends (up or down) of I-Fund vs Gold. The trouble I am having is how to set the axis. The date one is an easy one, but the gold range is more or less 800-1000, and the I-Fund is 13-18. How can I have these both on the same graph to compare? I am attaching an Excel sheet as a reference. Obviously I need to delete the empty IFund cells.
I am trying to make a line graph showing the gradual rises and falls in profit over a period of time, when I use the data and click line graph normally, it will plot each bit of data individually rather than gradually, for example;
If I tried to plot the above data, the graph will not show a gradual rise but instead will show a value of £1604.88 on the 23rd of September when instead I would want the chart line to be at £29,287.55 (The total).
What I have done is entered code to auto generate the date in column O whenever data is entered or altered in column A. Here is that code:
VB: Private Sub Worksheet_Change(ByVal Target As Range) If Not Intersect(Target, Range("A:A")) Is Nothing Then _ Target.Offset(0, 14).Value = Now
End If End Sub
What I am trying to do now, is create a column that will take the information from O and do a sort of COUNTIF function that will count how many items of data were entered on a certain date by the day. For a clearer example, I want it to tell me how many items were entered/altered on 7/23. But I also want it to continuously calculate it for each date after that. Preferably automatically, but if a macro is needed I can create an update button.
Once it can achieve that I would like to create a dynamic graph that will automatically (or via macro button) update to show the last 5 days. It should display the date and how many items were entered that day.
I have a set of data (numbers) I want to include in a bar chart. The numbers appear fine in the table. When I create the chart and sets the data (the cells excel goes looking in to create the chart), the values in the cells are divided by 10 for some reason I can't understand.
I tried to create a new file and a new chart, and the issue does not repeat.
I do not know where to look in that specific file to prevent Excel from dividing every number by 10 when I create a chart.
I have never coded for graphs using VBA where when I run the macro it changes to the 20 most recent data values collected. If column "A" is going to house my y-values and column "N" is going to house my x-values, what would be the coding to change the graphs data range?
My Idea: I am thinking to get the 20 most recent values I could use a row variable that would equal
Code: Cells(Rows.Count, "A").End(xlUp).Row
This would find the last data point entered. I just don't know the proper syntax to manipulate a graph.
I can make either a supply or a demand graph without problems, however no matter where I place the vaules, ie wage first, demand, then supply or demand, wage, supply, the graph will not work or look right. The wage must be on the left had side so that the graph complies with standard Supply and Demand. I also need to be abble to make another graph showing what happens with a wage cap.
I can do it on graph paper, put I can not find a way to do it using Office 2007 Word and inserting a graph option and using Excel.
I am in the process of setting up some graphs. The graphs will show the last 6 months of data so they move as each month is goes. I saw a slick way of doing this using the count function but this did not quite fulfill my needs. What I was looking for is to be able to input the start month in a cell. The cell would be part of the function within the formula. I created a simplified version of the spreadsheet below.
Then I created my names using the ctrl-F3
I then created the graph I wanted and wanted to use the formula =SERIES(Sheet1!$B$3,!chtCat,!chtIssuesReported,1). This kept getting an error indicated nothing really. It basically says there is something wrong with my Series function. I have a working version of a similiar worksheet I have been basing my entries on. They look almost identical but mine is failing. I also created a new file and tried this and it still fails. I can run the formula evaluator within Excel 2010 against the !chtCat and !chtIssuesReported names and they both return the correct value (which equals areas on the spreadsheet). I have also tried to enter the spreadsheet name and a tab in front of the names to get them to work and still get an error. Basicall I am trying to create the graph below (this grpah is using the hard coded locations)
did in [URL] but my issue is complicated by not knowing what cell I need to move the graph to.
I am using Excel 2010 and I am a realitive novice at writing VBA code.
In My spreadsheet, I have a list of properties and some related cost info. From week to week, the number of properties varies. Some days I will have 6 properties and others I could have 100. Because of this, I need to make all of my references relative to other cells. I am having trouble repositioning the graphs that I have created from the data to be 2 cells below the label I have created for the graph (which is a merged cell covering Columns B:I on a row 3 rows below the last property in the report.
So far, I have:
Dim r1 As Range, r2 As Range, GraphRange As Range Cells(2, 1).Select Selection.End(xlDown).Select
i have 5000+ addresses with no punctuation in them, just seperated by line breaks. i need to be able to add a delimiter (semi-colon, colon, full stop, any will do) to the end of every line of the address, not the cell; in order to extract the info using 'Text To Columns' in Excel 2010
I have been using it to take a picture of a graph, pasting to an alternative sheet within the same workbook, and renaming the picture by a defined name. S by selecting the names from a drop down list the picture will select various different sized graphs defined within my drop down.
What I am experiencing is when I initially do this the pic works great and resizes automatically with each selection, however the next day some of the pictures resize and some do not.
Is this a glitch within excel or am I missing a setting which will resolve this?
Excel 2010 - I need to create a graph that shows a week's use of a sportsground showing what sports were played, on which days and between which times. I thought I could show the times on the vertical axis, days on the horizontal axis and then the sports played in those times, however I'm unsure as to how to get the graph to recognise the times.
I've attached an example of some data and how I'd like to see it, I'm just not sure how I can do this using the chart set up!
I want to a horizontal line in a chart. There are only two figures with me. One I want to display as a column chart. The other as a horizontal line chart. (I can use both excel 2003 or 2010, whichever is suitable)
I would like to be able to add a line (a trend line) to a clustered column chart. The attached jpg (picture copied from Excel Charts - Easy Excel Tutorial) shows the general structure, with the red (poorly) hand drawn lines representing what I want to add to the chart.
If using Excel's Trend line functionality is not an option, I have already calculated the trend points adequately, so have the data to add as an additional series or combine with an existing series. (using Excel 2010)
I have a pivot chart which has one Axis field (Cell Ref2) and one Sum of Values field (which is a table series of percentages calculated from formulas)
I see the graph like I'd expect, but I'm struggling to get it to show percentages rather than basic integer units on the y-axis? Usually I would imagine to just right click on the y-axis : Format Axis, and expect to see something to change the display units, but it is only for hundredths thousands etc rather than a percentage ? The units themselves in the table for that value series are in percentages so I don't see why it isnt showing the percentage units in the first place.
I work with a team of users that are continually publishing reports in Word that contain charts and graphs copy and pasted from Excel into Word 2010.
We have a custom script that leverages a PDF engine to automatically convert .doc files to .PDF files that we distribute electronically to our clients. This all works great, but only if all my users select 'paste special' and Enhanced Metafile Format when adding their excel charts into our reports. Most of these people aren't tech savvy, and I'm havin ga hell of a time getting them to follow this workflow and am hoping there's a way in Office 2010 to select the default paste from excel into word when the content is a chart.
It seems like the default paste from excel is an embedded chart/graph that you can then further manipulate each component of the chart in Word; the default doesnt' paste an actual image. I am assuming the pdf renderer is using a lower resolution .PNG version of the image and when these are scaled for print and or pdf, they look like crap.
Is htere anyway I can automatically change the default paste format for the chart from excel into word to be an EMF/EMV (enhanced metafile?) Either thorugh the registry or some other saveable setting?
Where I have X number of Lists, each composed of two columns. The 1st column has the name of each item in each list, and the 2nd column has the value for that item.
What I'd like to do is create a function that would let me choose two lists, and tell me the amount of items in List X and what their values are in List Y, and then total them. Also, I would like it to work the opposite way, and tell me the amount of items in List Y and what their values are in List X, and then total them.
So for example, If I wanted to look at lists 1 and 2, the function would calculate that for List 1, Items D & E are found in List 2 and have a total value of 25%. For List 2, Items D&E are found in List 1 and have a total value of 17%. For all items not in both lists, it would return values of 0.
The code I came up with so far looks like this:
Function AK_Overlap_Go(x, y) Dim Temp(1 To 2, 2 To 1) Dim x As Integer
One of the problems I'm having is that the lists contain a different # of items, and so I think I need to loop the vlookup for each row. However, I'm not sure how to do that and get the cumulative values for each list.