Highlight Last Line Of Text And Copy To Line Below?
Mar 14, 2014
I have a spreadsheet where on a weekly basis data is copied in to various tabs. I then have a "formula" tab where I have a single line of formulas which look up the various data tabs and extract the results I want to show.
Currently each week, before I import the new data into the various tabs, I copy the last row in the "formula" tab and paste to the line below it. This contains all the working formulas. I then paste values only on the line that I copied, thus "locking in" the values it calculated with that weeks data. This means that each row then contains the results with that week's data, and this will grow week by week.
What I am looking for is a formula that automates this process. So let's say that row 30 is the final row of data on my formula tab, it contains the formulas I want to use. I would need a macros that does the following:
1. Looks up last row (row 30)
2. Copies last row (row 30)
3. Pastes to next empty row (row 31)
4. Pastes values only to second last row (row 30)
I'm not too great with writing macros, I've found plenty that can find the last row, but I can't get them to work to highlight that row.
Our small family business has a mailing campaign that we track with excel. However, we're very concerned about users opening the macro-filled master spreadsheet. Instead, we'd like a macro to do everything for them.
When a letter comes back in the mail with a bad address, the user types the Street number and street name such as "1234 Main St" into $A2 of c:dropbox eturned.xlsm, presses the macro button, and it should do the following:
Opens and Searches "Sheet1", "column S", in the file c:dropboxmaster1.xlsm, and finds the LAST instance of the address typed.Selects that entire rowCopies the entire row.Pastes the contents into the row of the active cell in the destination spreadsheet, overwriting what was there before. Such as $2:$2 if the address was typed in $A2.In the master1.xlsm spreadsheet, sets the entire copied row color to "gray".closes master1.xlsm and saves changes.
The end result is that the user now has an identical row of information in their spreadsheet, and the master spreadsheet's row is colored gray indicating it has been completed.
Other notes:I'm open to more efficient steps than this if you have them.There are approx 5,000 records to search through in master1.xlsx at any given time.
I have a spread sheet with Column A = Document number, Column B = revision.
I am trying to get a macro that, when run, increases the revision letter in column B. The problem is that we do not use a few of the letters such as I, O, P and Q.
I thought it would be best to have a table of the used revision letters (Say in Z1 to Z40) Look at the text in column B of the row currently selected and find it in the Z1:Z40 table Move one cell down the Z1:Z40 table and copy that text back into column B on the row initially selected.
I have the data to import / read in a pdf, in a doc, or in an Excel worksheet whichever is easier to use. I need to import the data, parse it into the correct cells for that row and then repeat the import until the end of the file. Not all the cells are in each group of data to import, so those cells will be null for that row. Some of the data for one cell may be in up to 14 lines in the data file. I have be concatenating these data rows into one cell. There are 48,000 lines in the file to import or I would do this manually. I am assuming that doing this in VBA would be the most efficient method.
I have about 180 workbooks which I need to compile into a Master Schedule.
All the tab 1's are different, these feed into tab 2, which the data has the same formatting throughout. The 2nd tab has the same data for A:F 1 but cells A:2 - F:2 down to row 9 are populated from tab 1, therefore different in each. I am trying to get a Master schedule that lifts the data in the fed cells into a line by line spreadsheet?
Is there a way I can get excel to look at a folder, then every workbook in it, the at the 2nd tab in every workbook, then list the cells as described above? I am not after a consolidation of this data, but a full list?
I'm trying to combine 2 cells that both have text on multiple lines separated by line breaks. I want to keep the formatting so that when both cells are combined, line one from cell 1 and line 1 from cell 2 are on the same line in the new combined cell. This is easy to do when there is only 1 line in each cell but how do you do this for cells with multiple lines? Here is an example of what I am trying to do:
A B C
1 First Name: Last Name: Address: John Smith 123 Harold Street First Name: John Last Name: Smith Address: 123 Harold Street
I need to read or clear all the line in specific range which will be increasing dynamically. Problem is "Selected File List" table range is not specified. New file chosen with browse will be added to "Selected File List" dynamically. Number of file can't be predicted.
What I've tried so far is, keep track of the browse button click and add the file path to arraylist. After that, (Row number 9 which is start line + arraylist size) to get the number of line of end of the table. But due to some requirement, I want to read the file from excel file. Something like -Read until found blank line or border bottom or something.
I'm new to VBA and I'm not so sure what I'm doing with vba codes
Here how it works, if B3 is the same color as the reference cell $A$76 and D3 is different than D4 then the result is 1
I would like this function to work from line 3 to line 60 and return the total of lines where the conditions are met. I'm thinking of a =COUNTIF function but can't get something to work. If there is a simpler way, it's even better. The IfColor is a function I wrote in VBA,
I need the Service Order tab to populate with data from the CPR tab based on the IO#. Since there is more than 1 occurrence of an IO# I need a formula to list the 1st, 2nd, 3rd, etc result of the vlookup in the cell under the 1st.
When I drag this down I get the 1st occurrence of the IO# 777 I need all of them.
B C D Atex ID#(unique id) Campaign name Site Row 7 1st occurrence of IO# 777 Row 8 2nd occurrence of IO# 777 Row 9 3rd occurrence of IO# 777
I have a worksheet that I need to be able to easily copy and paste the formula/formatting from the row above, but not the Values entered, (if any). I am using columns A to DG.
I just really need to be able to copy all the formula in these cells down - nothing exciting or fancy.
I've tried formatting as a table as per some searches and that was difficult! My column headings changed, and when I inserted a row, two of the formula's wouldn't copy down - plus the shading and borders went wonky in places.
Currently I am using Excel 2000. I did a search and couldn't seem to find the answer I was looking for. Hopefully someone can help. It would be greatly appreciated since I have been trying to figure out how to do this for days.
I am trying to create a worksheet that will pull info from a row on one sheet to another sheet based on the name; then continue to list the info on each line afterward until there is no more of the that particular criteria. See below (this is just an example to simplify the data but would need the same process):
This would be the data on sheet 1:
Name Bonus Commision
Tom $45 $50 Mary $25 $75 Mary $30 $80 Tom $60 $50 Tom $90 $25
What I would like to do is have 2 more sheets. One would be Tom's sheet and the other would be Mary's sheet and it would look like this:
Tom $45 $50 Tom $60 $50 Tom $90 $25
Mary $25 $75 Mary $30 $80
I am not completely familiar with all of the functions in Excel and compared to you guys I am a complete novice.
Is this possible to do in Excel without using a macro?
I have a workbook that usually looks something like this
Category Product No description Price
Balloons 12345 Red Disney balloon .50 Balloons 12567 Blue Princess balloon .86 Balloons 76521 Angry Birds Balloon .80
Kites 23456 A Big red Kite .27 Kites 22222 A small blue kite .06
Banners 10000 Party banner .33
I need to find a way to copy the category below an empty row from column A and paste it in the blank row in column B . If possible to bolden the text but I could probably work that bit out myself. I'm new to this but have used VBA before to run macros.
Simple question: Can an Excel Macro insert a line of boilerplate text under the last thing copied to a worksheet? I want to paste something into a worksheet, and add a message under it, and a blank line.
Removed screen shots - Please DO NOT use actual personal information, sample data only! - Moderator
Some of the people on this list have a second name entry on the line below their first name entry. ALL of the people on the list have an Address2 on the line below their Address1.
How would I move the second name entry into the cell next to the first name entry, and then concatenate them, and then also move the Address2 entry into the cell next to Address1 (but not concatenate these)?
I have a workbook with two spreadsheets. Sheet 1 is "working data" and sheet 2 is "Solution" As the title suggests, in sheet 1 is where all my calculations are performed, then it is pasted into sheet 2 and formatted. My issue is I need the information from "working data" to be copied and pasted into "Solution" but the information from "working data" will have a variable amount of rows (currently there are over 10,000, but their could be a few thousand more in any given month. The copied range from "working data" will always start in cell A1 and then should select all rows down until it finds a cell in column A empty, then the data should be pasted into "Solution" starting with cell A40.
I have a large spreadsheet of demographic data. In column A there is a name, in column B there is Address1 and in column C there is Address2. First I need to insert a new line under each line of data. Then I need the Address2 data (column C) of each line to be copied/pasted to that new inserted line, but in the Address1 column (column B).
I am entering large amounts of text into a text box uisng VBA code.
In VBE I need to line break the text using "space _" in order I can keep the text manageable on the screen. Problem is VBA is telling me there is a limit to the number of line breaks I can have in a sub, how I can solve this, ideally would like to paste a para of text at a time.