I'm trying to run a macro anytime cells G2, J2, M2, O2, P2, S2, V2, Y2, AB2, AE2, AH2, AK2, AN2, AQ2 change.
Right now I have the below code which is working well, but I only have it set for G2. Do you know what the notation is to make the target range multiple cells?
Also, I use the xlDown command in my sorting code, but later on it reverts back to "A5:AT60"... is there any way I can remove these specific cell references? I want to avoid having to re-write the macro every time my selection shrinks or expands.
Code: Private Sub Worksheet_Change(ByVal Target As Range) If Not Intersect(Target, Range("G2")) Is Nothing Then Rows("5:5").Select
I need to hide/unhide a couple of rows based on the result of a formula in the Target Range. Basically, Cell D2 contains the results of a sum (a+ B), if this is greater than 10,000, unhide the next row.
Below is an example from the ozgrid forum illustrating the worksheet change event. Not sure of the meaning of 'Do nothing if more than one cell is changed" on the 2nd row of the code. Does it means that if a value is entered in other cells, the code will not fire?
Private Sub Worksheet_Change(ByVal Target As Range) 'Do nothing if more than one cell is changed or content deleted If Target.Cells.Count > 1 Or IsEmpty(Target) Then Exit Sub If Target.Address = "$A$1" Then 'Ensure target is a number before multiplying by 2 If IsNumeric(Target) Then 'Stop any possible runtime errors and halting code On Error Resume Next 'Turn off ALL events so the Target * 2 does not _ put the code into a loop. Application.EnableEvents = False Target = Target * 2 'Turn events back on Application.EnableEvents = True 'Allow run time errors again On Error Goto 0 End If End If End Sub
I have main worksheet (target a) that I am trying to populate data from target(worksheet) b. The data I am trying to get from target b changes every month,(declining balance) based on a new month. So how can I get financial data from different cell each month from "b" into same cell in "a"? (so "A" # would be overwritten in same cell based on new # from "B". I have tried VLookup but can't be doing something correct.
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
If for example cell A1 begins empty with no data in it other than a formula and something occurs to change the state of cell A1 to a value which triggers a change in cell B1 (a variable), can I use this to fire a sheet change macro ????
Wish to trigger a macro on sheet change based on every cell in column C, is this even possible ???
Or, is a change in a variable (C1) for example, the same as that of a DIRECT user keyboard input for example ???
Private Sub Worksheet_Change(ByVal Target As Range) Dim c As Range If Not Application.Intersect(Target, Columns(3)) Is Nothing Then Application.EnableEvents = False For Each c In Target
When ever I update my external CSV file and hit refresh all data, I get #REF! Errors. The CSV file has a table that changes daily. Thus the "A" Column has a different number of rows depending on the day. The problem is that Monday the CSV file will contain 700 Rows, while on Friday it will have 200 Rows. I end up with a lot of #REF! Errors friday. How do I write the code so that (A561 for example) does not change regardless if it can reference the target cell or not? I even thought of making a macro that just copied the formula into all of the cells after each refresh, but there must be a better way.
Example code =IF(A561>0,IF(Start!$H$2="Monday",'calculations-mon-sat'!O561,calculation!O561),"")
I'm trying to create a sheet where clicking in a range brings up, in my users words, "a box I can type loads of comments in". They want some kind of flag in this cell showing if comments are posted or not. So far so ok, got the userform to pop up using the selection change event below and dump the actual comments somewhere the user won't look. A rather inelegant IF statement to see if there's anything in the dump cell gives them their flag.
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range) If Intersect(Target, Range("B2:B300")) Is Nothing Then Exit Sub UserForm1.TextBox1.Value = ActiveCell.Offset(0, 10).Value UserForm1.show End Sub
So what's the problem? When I select entire rows, the userform pops up. Is this unavoidable?
how to allow both these codes to work on say sheet 1. I can get one to work just fine. So, any tips on how to get them both to work on the same sheet would be great.
Private Sub Worksheet_Activate()
Private Sub Worksheet_Change(ByVal Target As Excel. Range) With Worksheets("Sheet1") If Not Application.Intersect(Target, .Range("n1:n200")) Is Nothing Then If Target = "S" Or Target = "s" Then Target = "Submitted" If Target = "A" Or Target = "a" Then Target = "Approved" If Target = "I" Or Target = "i" Then Target = "Investgating" Else End If End With End Sub
when I manually delete a row or column in my worksheet - the macro target addresses do not update.
For example, I have a Target.Address of B5 If I delete column A from the worksheet, I want the macro Target.Address to update to A5. Currently the Target.Address remains B5 even though the cell I am interested in has now moved to A5...
Here is my worksheet Sub Macro1()
If Range("B5") = "Yes" Then Rows("6:10").EntireRow.Hidden = False Else Rows("6:10").EntireRow.Hidden = True Range("C6:C10").ClearContents End If
Here is my workbook Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address(False, False) = "B5" Then Call Macro1
i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.
The existing code i have is:
Code: Private Sub Worksheet_Change(ByVal Target As Excel.Range) Dim MyText As String MyText = Environ("username") If Target.Cells.Column = 3 Then With Target If .Value "" Then .Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"
I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?
I am using a piece of track changes VBA code mentioned on this site, which among other things creates a new column that reports the number of any cell that has been changed (e.g., $K$32). What I would like to do is, next to that cell, report the title of the row in which that cell appears. In other words, if someone changes cell $K$32, for easier reference I'd like others to be able to see that this cell appears in a row titled "New Sales". I'll be happy to clarify with more specifics if need be.
I am fairly new to macros and have trouble with VBA. I have a file with multiple worksheets. Each worksheet contains the name of a specific location in cell A8. I want this name in cell A8 to be the name on the worksheet tab for each worksheet in my file but do not know how to accomplish this. Is that even possible?
In cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now itís 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.
looking to only allow a check ("x") in a column for a reconcile - type worksheet. Am I close?
Private Sub Worksheet_Change(ByVal Target As Range) 'Data protection. Only allow "x" in the "cleared" column. If anything else is entered, a message box informs the user 'and the cell contents are cleared. Dim val As Variant Dim msg As String If ActiveCell.Value "x" Then msg = "You can only enter an X in the cleared column." ActiveCell.ClearContents End If End Sub
Is there a way to either change this so that it lets me to select the whole area or a way to make a macro to do what this does to one cell?
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Not Intersect(Target, Range("M13:IR458")) Is Nothing Then Select Case Target.Value Case "1" Target.Font.ColorIndex = 20 Target.Interior.ColorIndex = 10 Case "Good" Target.Font.ColorIndex = 2 Target.Interior.ColorIndex = 35 Case "Stable" Target.Font.ColorIndex = 2 Target.Interior.ColorIndex = 27......................
On my Sheet, A4,A5 are positive numbers, I would like to write some code that watches a Range of Cells ("B5:B35") which are entered as negative numbers. The person cannot enter more negative values than there are positive. I know how to write the msgbox, and go from there. I would like some help with how to write the code to make sure no one uses more time than allowed. This is difficult to explain but I can add more if you would like.
I am aware that I can use single changing events in worksheet change events. For instance, if column 1, or A is changed, do something. This is only a single If statement, i.e. either the condition is true, or not. What I am not sure is if I can use two changing events, i.e. two conditions. For e.g. I would like if Column A value is X and Column B is "Active", action it, but only if two conditions are true.
For.e,g. The below syntax does not work. If it is only column A, it does work, but I want both A and B to be true, then copy and paste the target does not anything.
VB: If Target.Column = 1 Then If Target.Column = 2 Then If Not Intersect(Target, Range("A2:A" & Rows.Count)) Is Nothing Then If Not Intersect(Target, Range("B2:B" & Rows.Count)) Is Nothing Then If Target.Value = "X" And Target.Value = "Active" Then
I've got my macro working on a workbook called 05-14 Clearing TB-orig. From there, it saves as 2 new workbooks called 05-14 Clearing TB-aging and 05-14 Clearing TB-rec. But the new worksheets all keep the name 05-14 Clearing TB-orig. Can I have the macro change the name of each of sheet in the newly created workbooks so that they are the same as the new workbook names? [URL] .....
I have a worksheet that needs a lot of inputs to calculate something for the user. However one of the inputs is the date. I wrote code to insure that the date entered is only a 4 digit integer number (i.e. 2009). However I want this code to be used only if a certain cell (Cell(3,3)) is modified. Right now if the user enters anything in any cell this code brings a pop not just for cell(3,3).