I have a spreadsheet which contains data for crime incidents occurring in a month. I have created a worksheet which uses "IF" statements to pull in data that occurred within the last 24 hours only. I would like to create a report that can be printed which has a crime category and lists all the incidents for that category below that occurred during the day. The issue I am having is that all "IF" and "LOOKUP" statements are line for line and I want to be able to skip blanks or where it is not the category in the title.

I have a file which has some data I want to keep and some data I want to strip out.

The data I want to keep will always have either a date or a string “Overdue” or a string “> 1 year” in the first column, anything else I want to remove.

I have a filtered list of data expanded to "all" in each column. One column is "percentile" (25%, 50%, 75%, etc).

Search down the "percentile" column until you encounter 25% as an entry, then sum a number in the same row from a different column with each 25% entry you find.

I attached a spread. On the data tab, I have 2 criteria that I would like to use to move rows to another sheet. Columns U and W. An example would be that all rows that have a coil in Bay "B" and are allocated would go on the "B Allocated" sheet. I would also like this to automatically update when I delete the data in the data sheet and put new data in.

I would like to pull all rows and columns from a table and copy them to a separate sheet. I would like to pull the data if a certain value is present in a particular column. Essentially, it is the same effect of filtering the data but I don't want to have to keep filtering and copying specific cells and pasting them into a different sheet if I need to change the raw data.

Example: I would like to copy all ids, store, and partner information IF the partner is "X". I would like to put this information in Sheet A.

I have a spreadsheet with 3023 rows and columns A-L. Here's a small sampling of Column A (with heading "sku" included, copied exactly as it appears in the spreadsheet):

A sku 3102-0400-100000 3102-0400-200000 3102-0500-100000 3102-0500-200000 3102-0600-100000 3102-0600-200000 3102-0700-100000 3102-0700-200000

I need to delete every row in which column A includes the text "200000".

Although the above sampling shows "200000" appears in every other row, that is not the case in all 3023 rows.

I have a workbook with many (25) worksheets which all have the same structure, column headings, etc. but vary as to the number of rows. I would like to search all worksheets in workbook and copy to worksheet "120" only those rows where column C is "120" and column E is "1-00053-".

Ideally, input boxes would be used to enter these criteria so that it can be used for different scenarios in which these values will vary.

I have a file with many intercompany transactions. There is a range of business unit numbers that if anyone one number is in both Column B "Bus Unit" and Column E "Affiliate" I want the row deleted.

Please see the attached, it is more clear I hope. The two yellow rows would be deleted. The list of business units that I would want to never be on the same row is "4, 7, 41, 44, 46, 51"

I am looking for an Excel VBA code that can delete pair of rows that has certain criteria. I have included an example in the attachment and highlighted the rows that should be deleted. Since the values in each coloumn is going to change every day , I am looking for a dynamic code.

The objective is to:

To delete rows that has same code (columnd D), same basis (coloumn E), same Effective (coloumn H), value of TT (Column J) is either TI or TO and has offsetting Amounts (L) ie the sume becomes zero. Example pair of row 7 and row 8 as well as pair of row 12 and row 13 should be deleted.

TO and TI are actually transfer in and transfer out. Since the TI and TO for these rows make the amount zero for same code and same basis on the same effective date, I do not want to include this in the spreadsheet.

I have a sheet of data. The data starts in row 4 and can be variable in length. I want to delete rows that do not meet a specific criteria, for example a location, Leeds, which is in column "i" of the table. I have written the below but it seems to delete data from row 1 rather than row 4 and repeat down each row

Code below

Sub deleterows() Dim i As Integer Dim intCounter As Integer Dim strLocation() As String

p = Range(Cells(4, 6), Cells(4, 6).End(xlDown)).count

I have a range of data and need to summarize some of the data. In the table below is an example of the data. I would like to have a single formula where I can count the number of rows where the end date - start date is < 14 days. I would prefer not to add an additional column for the datediff value. Is there a way to do this with either arrays or named ranges?

Name Start End Other data Verizon 1/10/2010 1/25/2010 AT&T 3/2/2010 4/14/2010

BP Formula.xlsxI'm not sure what formula to use or if Excel can do this. I want to use it to determine number of blood pressures in a certain range. So if I use column A for SBP (systolic BP) and column B for DBP (diastolic BP). I want a formula to tell me if column A is between 140-159 or column B is between 90-99. I can get that part, but what I'm having trouble with is it counting each row twice if both column A and B meet the criteria, whereas I want every row (person) to only be counted once if either column A OR column B meet the criteria. (See attachment)

I have a row that contains a different time (hh:mm) in each column where each column represents a different date which is display in row 3. If there is no time the cell is populated with "N/A"

I want to count how many cells for a specified Month/year are not equal to "N/A". I have been able get each selction criteria to work but when I try merging numeric and non-numeric queries I lose it.

The following formula was able to give me the count of cells "N/A" =COUNTIF('Master Data'!$UA59:$ALZ59, ">0")

and this gave me a count by Month/Year =SUMPRODUCT(--(YEAR('Master Data'!$UA3:$ALZ3)=2012),--(MONTH('Master Data'!$UA3:$ALZ3)=1))

When I tried creating one COUNTIF I was unable to get it without an error as I needed the YEAR/MONTH functions.

Is there a way I can sum the result of a formula on a range of cells that meet a criteria? For example, I need to sum the difference of only the cells that are >46. (a1-46)+(b1-46)+(c1-46)...+(g1-46).

In this case the result I'm looking for is on row 2:

Is this possible to calculate in 1 cell only (h1)?

I would like to perform a search on only the worksheets listed in a worksheet titled table of contents. I would like to use multiple criteria for this search and send only the unique results to a worksheet titled results. Each worksheet listed in the table of contents has a cell address for each heading that I would like to extract data from the same column. The attached workbook example shows the data that I would like to collect when I search for cells that begin with "AB" and cells that begin with "CD". I collected this data by copy and pasting all the data from each worksheet into the results page and then applying filters and advanced filter to remove duplicates. This method does not work well for the original workbook as the data is quite extensive.

I've got a forecast from a customer and need to summarize it with part number, quantity and date.

The spreadsheet is part no in column a due dates in row 1 values at the intersection of part no and due date and i don't want 0 quantity to report back.

I am looking for a formula that either accepts the number in a cell if the numbers on two other cells are "approved". In other words, I have on cell A1 my value to be tested. On cells A2 and A3 I have two numbers. On cell A4 I'm looking for a formula that copies the number on A1 if A2 is bigger then 0.25 and A3 is smaller then 0.35. In not, there's no copy or a N/A appears.

I have a sheet with data only in column A. I want to remove any rows that dont contain the word MAR. All the lines with MAR in start with: CN=GR GG COF MAR **** macro which would do this as i have over a 100 sheets. and maybe an explanation as i am totally new to this?

I’ve got a spreadsheet with approximately 30,000 rows and I would like to create a macro which hides every row which has not the value 12, 14 or 19 in column I. What is the best way to do it? With an if statement?

I have a spreadsheet that is set out to look similar to a MS Project plan, with dates across the top, users in column A and Assignments in column B. In the corresponding cell that matches the user, date and assignment they will enter the number of hours they anticipate working on the assignment.

I then have a summary sheet that covers all assignments, week ending dates and users. I want to be able to calculate the hours and copy it into the cell in the summary sheet that matches the Day, User and Assignment. I have tried using SUMIF, but this requires the criteria cells to all be in columns, but with this sheet the dates are in a row.

I have built the following code which should look through a data sheet and then work out the instances where it meets the following criterias:

= "Client A" = "First letter of surname is "a"

The code is as follows:

Public rowcn Sub compare() Dim rngTemp As Range Dim intCounter As Integer loop_col = "Client A" data_sheet = "Data" target_sheet = "Summary" rowcn = 2 Do.............................

Aim - Extract every word after: and before , and put them in the appropriate headings

I have attached my desired results in column B - E. To calculate the answer, the heading of the tile is normally just before the : Meaning the Answer is after the : and before the ,

On the attached example i would like a formula in F2 which sums all the values where column equals "Smith" and column B equals "Golf European". I'm assuming it would involve the SumIf formula but i'm not sure if this is the best solution when the criteria is in two columns?