I'm trying to make a budget type spreadsheet for a club I run. I have a popup box where I click what was purchased, and now I want a drop down list of all the members of the club so that when I choose one name it is inputed beside what was purchased (I hope this makes sense !). I've managed to make a dropdown list in a dialog box but I don't know how to make it so that the name I choose is inputted into the spreadsheet.
I was wondering if there was a way to create a pop-up list to appear when a user selects a certain cell that would provide the user with a list of (in this particular case) inventory items. The user would select which items they require for the task at hand and the total $$cost of the items would appear in the cell once is is deselected.
I have 3 sheets (Master,Detail1,Details2) in my workbook. In the master sheet I w'll have customer names. In the detail1 & 2 sheet2 I will have their details. When I click on the customer name from my Master sheet it will go to corresponding sheet. I have provided link for that and it's working fine.
But my requirement is when I click the customer from Master sheet, I want to get into the detiled sheet as well as want to display the records only related to the custmor I clicked/selected in my master sheet.
compare one coloum with another and return a corresponding value in the adjacent cell. For example
I have 4 colums A,B,C,D. In "column A" I enter Products names (Example- Apple, Orange..)and in corresponding Coloumn B, I enter Product Codes (01 for Apple and 02 for Orange etc..) When I enter Apple in coloumn C for 10 rows (C1 thru C10), I need to get Code 01 in Column D in all rows (D1 thru D10)
I have, 10 combobox, if the user makes click in the combo,start the event combobox1_change, and the value of the combobox is searching in excel, when find it, move one cell toward the cell of the left, and the value of the cell of the left is shown in a label, that work.
But I need copy teen time the same code? (My english is very bad) this is the
Private Sub ComboBox2_Change() If Sheets.Application <> "Materiales" Then Sheets("Materiales").Select End If
I have a userform which manipulates data based on the userselection from the combo box. I have setup the userform so that the user may select up to 3 sheets due to the presence of 3 combos boxes. I need to writing an IF statement which checks to see if combobox1 is occupied to carry out a function, followed by it checking to see if combobox2 is occupied to carry out the function, and then checks to see if combobox3 is occupied and carries out the funciton.
As such, if only 1 combo box is occupied it would then only carry out the operation on combobox1's selection, and if none are occupied, nothing occurs, the box simply stays open. This is what I have so far, I know there is probably a more eligant way of writing such a If/Then/Else statement
Sub Start() If UserForm1.ComboBox1.Value And UserForm1.ComboBox2.Value > 0 Then Call Find1 Call kTest1 End If
If UserForm1.ComboBox3.Value And UserForm1.ComboBox4 > 0 Then Call Find2 Call kTest2 End If................
How do I check the information from a user selection of all comboboxes on a multi-page control to format a worksheet?
A few more specifics: There are roughly forty comboboxes on a multipage with six tabs. The comboboxes contain a list of choices for how different aspects of the project are financed. I want to check for whether the user has selected a specific entry. If any of the forty comboboxes have made that selection, some code runs that formats the column of the worksheet in a specific way. I have written the code which formats the column, and it works fine, but my attempts to run the check mentioned above, have not worked. The code cannot check based on .listitem, it must check based on a specific string.
A few more clarifications: It doesn't matter whether all forty comboboxes have this selection, or one; if any of them have the selection, the code needs to recognize this. The code would currently run off a command button which performs a series of calculations, tests, and then runs the code to format the worksheet.
I have two comboboxs on a userform, both are populated like this: (ComboBox1 is a different sheet/column)
' Sets Remarks in ComboBox4 Contents With Worksheets("Data") Set rng = . Range(.Cells(1, "C"), .Cells(Rows.Count, "C").End(xlUp)) End With With ComboBox4 .RowSource = rng.Address(external:=True) End With The function is that ComboBox1 will populate the names on lets say Sheet1, Column A, and when selected will populate by offset all the other Textboxs, and ComboBoxs.
Textbox1 is a date ComboBox4 is populated off of items from the data sheet ComboBox1 is populated off of sheet1 and provides names, then fills the userform fields
In populating the Userform, it fills Combobox4.value by the offset value of the selected name.
That cell does not contain the same info that was loaded into the ComboBox initally, and it does not show it. All other ComboBox entries match preloaded values, and show.
How do I get the ComboBox to display what is in the OffSet cell value, rather than blank because its different?
I have a list of country names in a listbox that are populated using another worksheet that has these country names. When I make a selection in the listbox, I want the same country names to be highlighted in the worksheet. I will then be able to run a macro that takes those selected cells as input.
I have a sheet with several entries. I want to find a way to have the user go to a specific cell instantly. What I thought I'd try was a combobox that when I click on a name in the combobox. It will make the matching name from the list the active cell.
Is it possible to have a combo box in excel, where, when an item is selected, it is assigned a colour depending on which item it is? Eg, The combo box list has item 1, and item 2. If I select item1, then the text becomes red, if I select item 2, the text becomes blue. If not possible using combo box, what method can I use?
I have a dynanic range named Room on B1. My combobox1 rowsource is linked to the Dynamic range Room. I would like to be able to delete the the specified selected room from the combobox and the next 3 column C,D,E (delete Shift cells up)
My attached files contains stock returns for companies. Each sheet contains the returns over a 5 year period for a certain stock, with the ticker symbol of the stock used as the sheet name. I want to write a sub that presents the user with a user form. This user form should have an OK and Cancel buttons, and it should have a list box with a list of all stocks. The user should be allowed to choose only one stock in the list. The sub should then display a message box that reports the average monthly return for the selected stock.
I use the code below to enter a value from a list box in a cell on a workssheet. Is it possible to code VBA to enter a number for the position of the selection in the listbox to a cell in a worksheet rather that the actual value from the list box. For example if my list is:
Option1 Option2 Option3
And I click on Option2 in the list, I can sennd the value 2 to a cell on the worksheet rather that the value "Option2' from the list.
Private Sub ListBox1_Click() Sheets("SA").Range("SA_Poistion_To_Archive_A_New").Value = ListBox1 End Sub
I am trying to do what I thought was a simple look-up. On one sheet in colum A I have some text and in colum B I have a number. On a second sheet i have a list of text that may or may not match the text on the first sheet in colum A. If the text in colum A matches one of the text items in the list, I want to have the value in colum B appear next to it in colum C. I tried to modify a vlookup formula but would only get a value error if there was a match.
TAB X, Column A contains a data set, each row is a unique value. In column B of TAB X, I want to input a formula that performs the following logic: Search TAB Z, Column C, for an exact match of data contained in TAB X, Column A....and if found, look in TAB Z, Column D...if a blank cell is contained there, then in TAB X, Column A, say "Unsettled" ; however, if there does exist any character (not-blank) in TAB Z Column D, then in TAB X, COlumn A, say "Settled".....but, if the data ID listed in TAB X, column A is not found whatsoever in TAB Z, Column C, then say "NOT FOUND". So for example, within TAB X, Column A there is a unique ID in one of the rows "ABC123", then searches "ABC123" in TAB Z, Column C. If found, it looks in TAB Z, Column D and that cell is blank, so TAB X, Column B, same row that contains ABC123, the result is "Unsettled".
I am hoping to create a drop down list of months in one sheet, and when I select a certain month, columns in about 10 other worksheets in the same workbook will either hide or unhide columns...
The spreadsheet is laid out with columns (C-N) for each month in the year, for actuals, then columns for budget and budget variance (O-P), then YTD Actual, YTD Budget and YTD Variance. When I select September, for example, I want October-December to hide, and leave Jan-Sep unhidden, while keeping the budget, YTD and variance columns.
I am trying to track cost. A master purchase order sheet has a column with a number relative to an account. I have about 50 accounts and a seperate sheet for each account. I want to enter the account number on the master purchase order sheet and based on that number, have the following data on that row copied to the next available row in the sheet for that account.
I have created a drop down list of products that we manufacture on a tab in excel. I want to use this list so we can create production/manufacturing paperwork that can be used in our factory.
On other tabs I have created the manufacturing specifications which are a list of specifications and cutting sizes that vary depending on the 1st column /size selected. The rest of the data for follows across.
However for the three products the manufacturing specifications are different so what I want to know is can I create a formula that says if I select product A then look at product A's specification tab, if I select product B select product B's specification tab or if I choose product C then look at product C's specification tab?
I can create a vlookup formula that works for one product and drops the necessary information into a sheet I have designed but I don't know to get it to distinguish the correct cutting info depending on the product type selected.
I'm trying to find out how I get a cell to automatically find a code based on the selection of a drop down menu. If drop down menu selction is Rent I want the cell to automatically find the code for rent 61100. It's a large selection that will grow alot bigger than it currently is so needs to also have growing room.? I can't seem to find any answers on here already that seem to work on this, (or understanding them is maybe my fault). I've attached the sheet
Is there a way to capture ALL the description in Column D whenever I change the code? This mean if I change the code to 546CC0004, the description will change Currently I copy manual from this file to another file. I Have more than 100 code with different Description. a Sample is enclosed.
I am trying to do a two way lookup with multlple results. In the example attached I want to know the names of the people who were in Boston on 01/02/09. I have tried a number of index, match formulas to no avail.....