Is there a way to use a lookup formula to return all values of a given text, not just the value of the first listing of the text. In an attempt to clarify my already confusing request, if A5 on "worksheet1" is "Land" I want E5 on "worksheet1" to return the summation of values assigned to "Land" "worksheet2" "column B" any time "Land" appears on "Worksheet2" "Column A".
I am wanting to use a vlookup or perhaps an array(?) to bring through multiple cell values based on being the maximum value. So say there are multiple employees (all with unique ids) under one manager (also with unique ID), I want to find the employee with the highest value in a particular column and return that employees details, such as name, employee number and the value itself, which are all in the same row. I have attached a basic example of the data involved.
In the attached sheet, I want to look up values from table (A1:G5) and then for each occurrence of a particular number, return the value in the same row in column H, and sum when there are multiple values (see green shaded area for desired output. For example, the number 8 occurs in E3, E4, and G5. I want to return the sum of the corresponding values in column H (1,5, and 2). I've spent hours trying to work this one out, I'm sure this is probably an array formula, but I can't manage to make it work.
Use a referenced lookup value from sheet "A", to return values, from several columns in sheet "B"
Things to note:
a) The lookup values sometimes repeat. I need all the associated values with each repetition as well.
b) The lookup values in sheet "A" are a comprehensive list, sheet "B" also contains some of these values but not all. Essentially, what I need to do is find a way to lookup each value in an account numbers column in sheet "A", against a different account numbers column in sheet "B".
If that value occurs in sheet "B" I want it to return the values from Columns X, Y, Z, (I want these values returned in sheet "A".
If that value does not occur in sheet B, the corresponding cells should remain blank.
If the lookup value occurs multiple times, I need all the corresponding values from each of X, Y, Z columns.
I know something very similar was posted before, but unfortunately, it wasn't what I was looking for. I have a Worksheet tracking several associates and the department they have done work in. (Our associates are contractors for other departments). I need to have a final worksheet that allows me to pull up a name, and display every dept they worked with in the past week.
I need to lookup data based on a cells content. The answer has to output to a table as a sequential list. I have attached a sample workbook (there will be 100+ sheets in the final version!). The Register sheet lists competencies against page# and title. For each Evidence Sheet I need to populate the Competency grid (C4:D10) in a sequential manner i.e. no blank lines,and the Title (B13) based on the Page # (D2). I have looked at a great number of postings, but cannot see a solution that fits.
I have a worksheet containing a list of states in column A and a list of companies in column B (along additional data in columns C-L). I want create a lookup formula on a separate worksheet where users can select the state from a dropdown menu and it will return the information from columns B-L for that state.
A B C D Alabama ABC Company Active Expires December 2009 Alabama 123 Company Expired Expired April 2008 Alabama XYZ Company Active Expires August 2009 Alabama Larry Company Expired Expired May 2006
How can I do this without losing my mind? I've tried various Index, Small and Match formulas and none of them work.
At work I have a spread sheet that I used to track material shortages by part number. So in column A of the spread sheet there is a list of part numbers that have shortages, column E contains a list of all sales orders that are affected by the shortage separated by a comma. I am trying to setup a query sheet where I input a sales order and get back a list of parts that are short for that sales order(basically reversing the original list to be by sales order instead of part number). The number of values in column E varies, sometimes a cell will have 1 value, sometimes 20+ and anywhere in between.
Example Sheet: A B C D E
I'm already got a INDEX/MATCH that would show both shortages for sales order 012. But I can not figure out how to get the shortages for 789 or 567.
I have a problem with the formula that lookup all values in ascending order and returning all the corresponding values. eg: I was intended to lookup for the value in ascending order under the Total Occurrence and returning all the corresponding value under the Nos Group but encountered the same Nos Group was returned when there is same value appeared under the Total Occurrence.
I have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
I have a problem with the formula that look up multiple records with the same values and return multiple corresponding values in ascending order. I am using Excel 2003 and it is a bit complicated to explain so I have attached a sample spreadsheet to show what I mean.
What I want was after I have sorted the occurrence value in column E based on column B and I want to correspond the Rank in column D based on column A in ascending order for the same occurrence value in column E.
Eg: There is two occurrences for number 1 at E3 and E4, and three occurrences for number 2 at E5, E6 and E7 in column E. Then the Rank for the first occurrence for number 1 in D3 should be ranking 6 and the second occurrence for number 1 in D4 should be ranking 7, so the Rank for the first occurrence for number 2 in D5 should be ranking 3, D6 should be ranking 4 and D7 should be ranking 9 based on column A and B, etc.
Hi there, please can you help me transfer data from 1 spreadsheet to another (I have attached a file which has 2 sheets).
I am trying to populate columns G to L (sheet B) with data from column H (sheet A) - the lookup is between 'Material' & '7410','7090','7680','7060','8630','7580' on sheet B & material & plant on sheet A.
I have tried H&VLOOKUP & INDEX/MATCH but I keep returning a #N/A..
COLUMN A.....COLUMN B Person 1.......Process 1 Person 1.......Process 1 Person 1.......Process 2 Person 1.......Process 1 Person 1.......Process 2 Person 1.......Process 3 Person 2.......Process 1 Person 2.......Process 4 Person 2.......Process 1
and so on.
In the list, the "People" aren't neccessarily in order, for example, later in the list, Person 1 appears again. There are a total of 10 processes, and any person can do any number of each.
What I ideally want is in Columns D, E, and F, is something like the following:
COLUMN D.....COLUMN E....COLUMN F Person 1...........3.............Process 1 Person 1...........2.............Process 2 Person 1...........1.............Process 3 Person 2...........2.............Process 1
so a summary of the main data, showing how many each process each person has got.
I have, and failed miserably, getting arrays to work but that might just be down to my own incompetence. I have researched into Countif's and Lookups, but it's not quite working.
The data in columns D, E, and F needs to be fairly compact so ideally I wouldnt want any spare rows between the end of the summary data about Person 1 and the start of Person's 2 details.
I have all my data on sheet 2 which contains tables that relate to information on regions, manufacturers, etc so it can be a large amount of tables which will change from month to month depending on a monthly list. For example, if “Region 1” is in cell B134 – the resulting data I need to pull out will be contained in C138:G232 ...or ”Region 2” which is in B235 – table info is in C239:G333, etc, etc.
On sheet 1, I have a cell (L7) that is populated by another formula. This cell is effectively my lookup to pull out information from sheet2 to populate cells in (sheet1) AE119:AH212 - same sheet as the reference (L7).
I need to look up the reference/resulting value that is in L7 on sheet1, find and match against the values in column B on sheet 2 and then pull in the corresponding table information.
If the value in L7 was not changing at all I could do.. in cell AE119… =OFFSET(sheet2!B134,4,1,1,1) etc etc ... but I am at a loss as to the value in L7 changing and incorporating a lookup… or maybe I am looking at it wrong..?
I have looked up match, offset, index and lookups on the forum and have managed to confuse myself even more. I have even tried taking some of the example formulas and amending with my references but to no avail.
I am currently looking at the workings of a spreadsheet designed by someone else.
First of all i need to know,how these combo boxes are created in the attached sheet,because it cant be edited.in addition to tht in the coloured cell (F17)i'm trying to dereive a formula which is,if (C17 = doll "1"),but its not working.Please someone give me a solution.
Im trying to work out how to write some code to find and replace from a list.
I have key data in column P on sheet 1, and a list on sheet 2 with the same key data in column C.
Basicially, every month the data on sheet 1 changes (there are usually 100 rows of data each month) and what i want to do is, write some code to look down column P on sheet 1 and for every cell, find the corrosponding value on sheet 2 (column C). When it finds the value, copy and paste it onto sheet 3 then delete the row from sheet 2.
I hve written some code that can do the first part (copy and paste) and a second macro to do the deleting....but it is only for 1 value at a time...
Input date on left column and the cell on right will automatically look up this date from the list located in other spreadsheet and return multiple corresponding in sequence order? Once another date is entered on left column, it will do the same function again on right column?
I'm using this formula in a roster scene to pick up people that call in sick and display their restored job in a different cell. The problem that I am having say for example employee one calls in sick at 2 pm and i assign that job in a corresponding cell to another, then employee 2 calls in sick for the 1pm shift (the call was made after i have already restored employee one a replacement), the formula automatically places the 1 pm in the cell above the 2pm.
Is there a way to stop it from changing the value once a value is entered in a corresponding cell?
Link to the original formula thread. [URL] ........
I have an excel worksheet that consists of 4 tabs. Each tabs has approximately 60,000 lines of data. The data consists of user id's and menus that correspond to the user id. There are 131 user id's in total. I would like to be able to return all the menus for one of the user id's. If we need to start with one tab and work from there, that's fine.
I am trying to return a value from table below (column 4) based on values in the 1st 3 columns. I have data with the 1st 3 columns but need to lookup each and return the 4th so I have tried some formula's with if and vlookup statements but keep getting lost....