# Multiple COUNTIF Statements With Different Criteria

Dec 21, 2007I'm a marketer trying to find all calls within a week that are longer than 300 seconds. I'd prefer not to use a pivot table because of client issues.

=COUNTIF(A:A,1)-COUNTIF(F:F,"

I'm a marketer trying to find all calls within a week that are longer than 300 seconds. I'd prefer not to use a pivot table because of client issues.

=COUNTIF(A:A,1)-COUNTIF(F:F,"

ADVERTISEMENT

i want to use Countif() when 3 ceritera are true

ceritera

--------

1) Branch Name

2) Status

3) Login Date

can this be done by any mean

what I'm trying to do is to make a logbook for a machining center. Each part has an op10 and an op20, essentially front and back. And each part number falls into the category of OS or FS. I've used AND logic to make tables in hidden columns to be used by a countif statement to determine my totals. I.e. to determine if a scroll is completed, op20 has a a value of 1 AND column C is "OS".

I use

=IF(AND(A9=1;C9="OS");1;" ")

Then I countif criteria is 1 in the column i created with that statement.

That works just fine. Now what I want to do is to be able to create daily totals of OS and FS by simply modifying a variable date in a formula. So I'd like to essentially say: Countif Column C =OS and Corresponding column D = 1, and corresponding Shift date = 10.02.12(date to be variable). I'm at a wall here. Is there any way to do this somewhat simply?

I'm trying to count multiple criteria from a second page in a work book, all the formulas i've looked up and tried do not seem to work... here's the formulas i've tried. DKOBULAR is the name of the 2nd page. D is the column used for the different resolves.

=COUNTIF(DKOBULAR!D:D="resolveA")+COUNTIF(DKOBULAR!D:D="resolveB")+COUNTIF(DKOBULAR!D:D="resolveC")+ COUNTIF(DKOBULAR!D:D="resolveD")

=COUNT(IF(DKOBULAR!D:D="resolveA",IF(DKOBULAR!D:D="resolveB",IF(DKOBULAR!D:D="resolveC",IF(DKOBULAR! D:D="resolveD")))))

In Excel 2003, I need a countif to check for 2 criteria: (1) the left function looking for the value "Territory" in column A and (2) value > 0 in column G. I only want to count the rows where both the criteria are met. I have tried different combinations of countif including "and" in the formula, but I cannot get it to work. What is the proper syntax?

View 9 Replies View RelatedI need to create a formula which counts the number of times a username appears in column X based on a given value in Column Y. This data will not be static - will need to be refreshed regularly. Countif does not support multiple criteria - what is the best way to create this formula?

View 2 Replies View RelatedI need a formula to count cells E7:E500 that say "Submitted" but only if cells R7:R500 say "PPB".

My original formula below is counting all cells except for the ones that say "PPB"

=COUNT(IF(E7:E500="Submitted",IF(R7:R50="PPB",'E7:E500)))

I haven't been this deep into excel before. The deeper I look, the more potential I recognize, the more amazed I get. That being said, I have come to a tough count issue. Let me attempt to explain as precisely as possible.

My current worksheet is large but I am only particularly concerned with two columns of information (Regions) and (Days). The logic I am attempting is something along the lines of Count If Region = East, or West, and Days is greater than 0, less than 60.

I am open to any and all suggestions on how to tackle this situation. I have been able to achieve similar counts by using pivot tables but the dynamic nature of these two columns presents some difficulties that my “new user” mind has been unable to work through.

I have a bunch of cells that i want to count in a table based on 2 criteria. The first would be checking whether or not it matches a certain text which i can do. Now i have a column for "Completed Date" and "Deadline Date". Each deadline date is different. I know i need some sort of array function in there to compare all the completed dates vs deadline dates but i just can't think of it. This will be the second criteria.

View 3 Replies View Related=COUNTIF(A$2:T$1001,V2 & W2 & X2 & Y2)

I want to copy and paste this formula down column Z.

I want to count or add 1, only when a row of 20 cells (A to T) contains all 4 criteria in V W X Y.

I need to add all cells within multiple ranges where the characters "A", "S" and "D" occur.

=SUMPRODUCT(COUNTIF(INDIRECT({"C22:C25","C28:C32"}),{"A","S","D"}))

I need to count rows that meet 2 criteria.

I have seen this help page

http://www.ozgrid.com/Excel/count-if.htm

but that counts rows with "criteria 1" OR "criteria 2"...

I need to count rows that fulfill "criteria 1" AND "criteria 2"

ie - count the rows that have todays date AND a cell that says "COMPLETE"

ideally it would be as easy as "=countif(A:F,"today()","COMPLETE") but that doesn't work... any way around this???

I need to create a formula that counts the number of times that an age range appears within a column. In column G, there is a list of ages based on a demographic collection. The ages range from 13 to 50+. I want to designate another cell to count the number of times the characters between 13 and 18 occur within that column. I have =COUNTIF(G8:G20,"13") How do I add "14", "15", "16", "17", and "18"?

View 2 Replies View RelatedHow many tickets are created and fixed by a user for a certain period. See below. I've tried countif but it doesn't seem to be working for many criteria.

Start Date

11/1/2012

End Date

11/31/2012

Assigned To

Created

Fixed

[Code] .....

Can countif function work on multiple criteria to look on?

this are the criteria.

SA SL 1.0SA SL 0.5SA VL 1.0SA VL 0.5SA SLWOP 1.0SA SLWOP 0.5SA VLWOP 1.0SA VLWOP 0.5SUSPRD

How to use countif in Excel 2003, for multiple range and criteria ? Can 'Nested ifs' be used? If so, a sample of such ifs

View 3 Replies View RelatedI want to be able to look at two columns and set a criteria to count. I want to look at column A and if its blank then look at column B and if it has a value of more than 0 then count.

A B

1 1.00

2 Yes 4.78

3

4 5.00

5 Yes 4.89

6 11.99

So this example would count 3

I'm trying to write this but it returns a 0 when I know there are 3 records that match this criteria: =SUMPRODUCT(('Invoice-Detail'!J2:J50="NewJob_Post.NET")*('Invoice-Detail'!H2:H50="KY_*")). I think the problem is in the wildcard character. I don't know if I should be using COUNTIF or SUMPRODUCT or something else?

View 3 Replies View RelatedI have three IF statements as below. the problem is if the first statement is true I want it to skip the next two statements or the result will be changed again.

View 2 Replies View RelatedI am trying to produce a report of supplier transactions sorted by area code. I have a spreadsheet of data consisting of Supplier Code, Supplier Name, Transaction Amount and Area Code.

I want to be able to firstly seperate the transactions by area, then also consolidate the data so it shows one row per supplier with total amount spent on that supplier and a transaction count on that supplier. I know how to sumif the transaction total and countif the transaction count.

However I have problems consolidating the suppliers in to one row per unique supplier and I also have problems nesting an AND statement in to the sumif/countif statements. I need additional criteria in the forumula to only count transactions in a specified area code.

I've attached an example spreadsheet to make it alot clearer. See results sheet in this workbook.

I have simple Countif and Averageif formulas that I would like to have linked to variable data in cell E6 on the Assumptions (2) tab however, the formula is not taking the cell as the criteria and only taking a hard number when I am using >=.

The example would be: I3 needs to be able to use the data changed in E6 for the >= number instead of the hardkey 29...

I am trying to get a function in a sheet where it has two possible truth outcomes and one false outcome. Both statements false statement goes back to

'Production Metrics 2'!E11/12

Here are the two If statements as they appear in the formula bar now. I need to combine them so they both work and don't cancel each out out.

=IF('Production Metrics 2'!E11/12>2500,2500,'Production Metrics 2'!E11/12) If c10+b10>=4500,0,'Production Metrics 2'!E11/12

I use Excel 2003 and I have the following problem:

I have 3 columns,

A containing a list of employees (MICHAEL, BOB, MIKE, etc.)

B containing their work starting hour (8.00, 8.30, 9.00, etc.)

C containing the possible employee absence reason (ILLNESS, HOLIDAY, INJURY, etc.)

I would like to write a formula that counts the number of employees who have a work starting hour within 7.00 and are not absent. A possible table is this one:

NAME START ABSENCE

MICHAEL 6.30

BOB 8.30

MIKE 9.00 HOLIDAY

BRIAN 7.00

TOM 6.30 ILLNESS

The formula I'm looking for should calculate "2" (because MICHAEL and BRIAN are the only 2 employees starting work hour within 7.00 and not absent). As I have thought it could be useful, in another worksheet I have inserted: in A column the list of all the starting work hours: 0.00 (A2), 0.30 (A3), 1.00 (A4), 1.30 (A5), ... 7.00 (A16), 7.30 (A17), ... 23.30 (A49).

in B column the list of all the absence reasons: ILLNESS (B2), HOLIDAY (B3), INJURY (B4). I have defined 2 names, the first called EARLY_MORNING (that I have associated to the range from 0.00 to 7.00 of work starting hours column, that is A2:A16), the second called ABSENCE_REASON (that I have associated to the range (B2:B4) of absence reasons' column). What kind of formula can I write to obtain what I want (using the 2 names EARLY_MORNING and ABSENCE_REASONS defined in the other worksheet)?

I have a spreadsheet with a list of months numbers and average turnarounds. Each row represents a different factor, so there are multiple rows for each month.

eg

Month Turnaround Time

10 5.2

10 6.7

11 1.1

9 8.3

11 5.4

10 6.1

etc

What I am after is something that will count the number of instances where the turnaround time is above a certain limit (eg 6.0) for each month.

What vba function can I use that checks criteria much like SUMIF or COUNTIF uses? In other words, say you want to write COUNTIF that only includes visible cells...

Public Function CountVIf(rng As range, criteria As String)

Dim cell As range, cmd As String

For Each cell In rng

If cell.RowHeight <> 0 And cell.ColumnWidth <> 0 Then

cmd = "COUNTIF(" & cell.Address & ",""" & criteria & """)"

CountVIf = CountVIf + Evaluate(cmd)

End If

Next cell

End Function

How can I do this without having to rely on Evaluate("COUNTIF...."?

What I need to do is count the number of “Cs” in a column based on a date in another column but in the same row. I have tried something similar to this: COUNTIF($C$1:$C$20,"=today()")+COUNTIF($E$1:$E$20,"=complete") but is does not work. If the date in the column is less than or equal to a date specified in a cell in another worksheet, I want it to count the C in the row (if there is one).

View 9 Replies View RelatedIn Row 3, starting at cell C3, I have a list of Stores in the format Store A (Town 1), Store A (Town 2), Store B (Town 1) etc

In Rows C4 to CA7 I have 1 or -1

I want to count the number of instances of 1 for Store A

I have tried the following formula, which is returning 0

{=SUM((C3:CA3="Store A *")*(C4:CA7=1))}

is there any way to put 2 criteria into a countif() statment?

Say A1 to A100 are filled with information

I'd like to count if things are equal to 4 and 5

I know this isn't proper syntax:

=countif(A1:A100, "4" && "5")

I'm trying to get something like that to work.

I have data in two columns. Column B has calculated string values of "BMAJOR" and "BMINOR" and column C has date values.

I am trying to get a count of how many occurences of "BMAJOR" or "BMINOR" occur for every week starting today. I have column AJ which returns today() and column AK which returns today()+7. I can individually count number of occurences of dates that fall within these dates with the following formula. This for row 2.

=COUNTIF('Decision Tree'!$C$4:$C$215,"

I am using a work sheet where I want to count if Column A has one criteria and column B has another

example

column B states is used to track contracts it can be vendor

column L tracks status it can be open, received, or closed

I want to count the cell if the vendor name matches and the status is open

also if that is possible is the same possible with 3 ranges and criterias?

Copyrights 2005-15 www.BigResource.com, All rights reserved