Re-establishing Formulas On “text” Input For A Specific “cell” = Original Formula Act
Nov 23, 2009
See attached worksheet for reference. Is it possible (while utilizing the same spreadsheet on a weekly basis) to zero a spreadsheet subsequent to its use. Importantly however, all relevant formulas must remain perfectly intact and will re-establish themselves once relevant data is placed inside an individual cell? In this case, as soon as a “Name” (or even a letter) is referenced inside the “Name” column: H10:H19?
In other words, the entire sheet is blank bar the top date and respective headings. Once any text is placed inside cells H10:H19, the formulas from the associated Row re-applies itself to the “Week-Start” dates, “Week-End” dates and references a default “Phone” amount for ‘$10’? The Data Validation formulas I’m sure would remain undamaged? This would prevent ‘text clutter’ (such as dates extending to the bottom with no apparent referencing or connecting information?
I do data entry for a driveway company. I get addresses and phone numbers, and then call the people to offer services. I keep track of my calls on the spreadsheet, color coded for my results, green for leads, yellow for voicemail/no answer, and red for not interested.
I have formulas in cells M2 through M8 to give me my overall stats for the calls I have made, it filters them by color for leads, missed calls, and rejections, and a couple other stats (mostly for my own curiosity)
What I'm trying to add is the cells L10 to M13, I want to be able to input a date, for instance 8/15, and have it run the same stats, just for that day essentially. So, I need it to search the last 2 columns in the table for the text that I input into cell M10, and then run the color based formula on those cells, and total them up in the appropriate cells, M11, M12, and M13.
The 2 Stats tables are the same at the moment in the sample, as I only included one particular street that I have mapped, my actual table is nearly 3000 rows.
The problem is when I highlight a row with some color the original color of the row is gone, so I tried this code, and again, it's removing the original format and color for the row This is the code from McGimpsey & Associates : Excel : Highlight row with background colors
Code: PrivateSub Worksheet_SelectionChange(ByVal Target As Excel.Range) Const cnNUMCOLS AsLong=256 Const cnHIGHLIGHTCOLOR AsLong=36'default lt. yellow Static rOld As Range Static nColorIndices(1To cnNUMCOLS)AsLong Dim i AsLong IfNot rOld IsNothingThen'Restore color indices
[code].....
How can I retain the range's historical color so that when I deselect the row it reverts properly?
I want to use the text to columns function when the original cell has more then one line (lines are separated with Alt+Enter). Somehow Excel does only notice the first line.
I paste new data into a sheet of a monthly report I prepare. For this sheet, the # of data rows change (and is unpredictable) every month. I need the value inside a specific cell that dynamcially moves up and down based on the # of rows for that month (because it's below the rows of data).
So I made a formula to identify the exact cell # every month.
Example:
This month the exact cell is F255 in the "Refi" sheet.
So my formula in the "Summary" sheet cell A1 first finds the cell row # only (255) and since it's always column F, in B1 I have
VB: ="F" & (A1)
This outputs "F255" in B1, successfully identifying the target cell.
Now how do I write a formula in C1 to grab the value from whatever cell is named in B1. (For this month, the value in cell F255 from the "Refi" sheet)
I am trying to create a macro which gives me an input box. I need to enter 2 numbers into the input box. It would be as follows:
Input Box Msg 1 - "What is your labor cost?" (NUM1) Input Box Msg 2 - "What is your productivity rate?" (NUM2)
Then I need the macro to take this info and enter it into a formula which changes according to the row which you are on. (I need the macro to work based on which ever cell I currently have selected). The formula would be this if I currently had a cell on row 10 selected:
=(NUM1*(NUM2*$H10))/$H10
So, if I currently had cell L10 selected, and I ran the macro and put 100 in for "NUM1" and 10 for "NUM2" and my sheet had 20 in cell H10, then the macro would enter the number 1,000 into cell L10. If I had L500 selected, then the macro would enter the final number into cell L500 based on what value H500 contained.
I am just starting to get my feet a little damp with VBA and I am trying to make a macro that will act whenever any text is entered in any cell within a 3x3 square. Whenever any text is entered in any of those cells I would like it to enter a text ( "X" ) in a cell which is specified by a cell in the spreadsheet (this cell will output which cell the macro should write the text in in this format "A:1" or "C:3"). How can I make the program act only in reaction to the user entering thier text, and also, how can I get the macro to read A:1 and enter the text into that specific cell? Any help would be so awesome, the book I have is really difficult to navigate.
I'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
I have a series of formulas in Row 1 across the columns in worksheet A. I would like to copy these formulas to a single column and down rows in worksheet B while retaining the references to worksheet A. I know that I can manually enter the references in worksheet B but that would take a long time to do.
I am trying to create a continuously updating record or log of the numbers in a particular cell that has numbers that change frequently. I want every number that was every in that cell recorded in a table or column so I can analyze those numbers. Please note that I do not have much VBA experience.
I have a workbook with two sheets (MainSheet and Stats)
In the Main Sheet Column A has a name entered which is surname plus a christian name e.g Smith Thomas
This name could be anywhere in the A column from the bottom up
In the Stats sheet Column A has a surname and Column B has a christian name e.g Smith in ColA and Thomas in Col B. Smith and Thomas will always be on the same row but could be in any row on the sheet from the bottom up.
I need a formula which can compare the name in the MainSheet with concatinated name from the Stats sheet if the names are the same then change Cell H1 to the text "Match"
An example might be that on the MainSheet A16OO = "SMITH TOM" on the Stats sheet A2="SMITH" B2 = "TOM" . The formula would be on the Stats Sheet in H2 which in this case would = "Match"
I have a worksheet with several columns. I need a formula to search column D only and each time a specific location is identified to replace that location with alternate text. Example (ORIGNAL TEXT):
Column Dtext to text help.xlsx BIRD FISH DOG BAT BUG
I need to search that listing and each time the word BIRD is mentioned have it replaced with FEATHERS and each time DOG is listed have it replaced with TAILS Final result would look like:
FEATHERS FISH TAILS BAT BUG
All other text should stay the same and replacement text should appear in the cell of the text it is replacing. This is a sheet used by multiple people several times a day and so the Find/Replace option really won't work.
Have working on this for at least 6 months and it just isn't going to happen for me. I thought I could use a Conditional format, but that is producing no results either.
Sometime it’s so hard to explain what it is you are having problems with, specially in the little title. I'm trying to write a formula which should be very simple but isn’t . The formula is in box F10 if B10 has anything in it and its going to have a mixture of text and numbers (first text then numbers) then it’s should equal to the value in the box C7. Here is the formula I wrote that doesn’t work.
1) Text value here 1. Text value here 1.Text value here 1 Text value here 1)Text value here
Is there a way to take the cell contents from the first Alpha character? (i.e. no punctuation, no numbers). There are other numeric characters in the text values that I would like to keep.
Is there a work around to pull data from cells in excel to another tab with standard language? For example the template language will stay the same except in example A's case the last sentence "0.0" hrs will vary based what's sitting in B34.
It's stating the formula is too long. Is there too much text?
Sometimes the link would be in the middle of the text as shown in example B below with dates 00/00/00.
EXAMPLE A For any leave of absence that is granted for more than 10 days, time off is governed under the Disability Bank Policy. Under the Disability Bank Policy there is a 10 day elimination period which must be satisfied prior to gaining access to your disability bank. During this 10-day elimination period, you are required to use your sick time for the first 6 days (48.00 hours) and vacation time for the remaining 4 days (32.00 hours). After this elimination period, we use all the time accrued in your disability bank. Currently, you have a disability bank balance of "00" hours.
EXAMPLE B After this disability bank is exhausted, you will use all remaining and future paid time off balances from your vacation/CME/holiday banks. Because your leave begins in 00/00/00 and ends in 00/00/00 we will advance you future paid time off balance thru 00/00/00. Once those balances are exhausted the remainder of the leave will be unpaid. Per our policy, should you not return to work, you agree to pay back any time advanced to you within 30 days of your separation from the company.
I'm having some trouble trying to get excel to input a formula into a cell. I'm still a novice at VBA right now, so I don't think my problem will be too much of a brain buster.
I want a formula in Cell A6 (and I already know it correctly works) in this format: =E6&VLOOKUP(I6,'FA-Fund Data'!B$1:C$2000,2,FALSE)&J6
I have a list of times, and I need to work out a way to establish what time interval it applies to, using a function. In production, this will be used over hundreds of entries at a time, but for the sake of example I'll cut it down to 15 times:
So, what I'm looking for is a formula that will match up the time to the interval. For example, it would look at 16:52:38 and output that it falls within interval 20.
I have the below code which creates a new template
Code: Private Sub NewTemplate_Click() Dim Tsh As Worksheet Set Tsh = Sheets("TEMPLATE") Tsh.Copy After:=Sheets(Sheets.Count) shName = InputBox("Please enter new sheet name:") ActiveSheet.Name = shName Tsh.Visible = False End Sub
What I would like to add to the above code is two more inputbox prompts, the first should prompt the user for a Name (text and length) to go into the new sheet cell A6. The the second input box should as for code, (number any length), to go into the new sheet cell b6.
I'm working on a plan with the objective to reach a 20:80 ratio from Team 1 to Team 2
The intent of the is get 80% of the work to be supported by Team 2, which currently has no team members.
Team 1 currently has 32 team members.
I am trying to to determine if I need to hire or re-deploy employees to from one team to another or to another program to achieve the objective.
The objective is to take Team 1, which is currently doing 100% of the work & reduce that work load to approximately 20%, which then Team 2 will be supporting approximately 80%.
I started a generic calculation but I believe it's wrong.
I'm having a 6000+ records, (contacts DB) exported in Excel 2003 format from MS Outlook.
Except the "First" and "LastName", all other contact elements are in the field "Notes" (which is the BZ column according to the exported outlook layout) multiplied by 6469 (records in total)
Now, I want every time to take the part of the text says "TER:something..." (part of which is date, but not every time with the known format dd-mm-yyyy, as you see here is yyy, followed by something else, with parenthesis here and maybe more data) and copy it in a new cell..., e.g:CO Column, same Row...
Above and every field which by the way is formatted as General (and it is text mainly) are made by merging older excel fields where data laid here and there, that's why you see the commas...with the method of a module with the following code:
Function MyMerge(Rng As Range) For Each Cell In Rng Temp = Temp & Cell.Value & ", " Next Cell Temp = Mid(Temp, 1, Len(Temp) - 2) MyMerge = Temp End Function
Note1:Records with the above string (TER:dd-mm-yyy) are 771 from 6469. Note2: As an alternative solution I can see an extraction of the TER:dd-mm-yyy string and the copy in a new place, like the:CO Column, same Row...
i'm having trouble formating a cell to accept either user input or a equation i've made. i would like it to accept the user input and when there is no input to use the equation i have.
I have two coloumns on a worksheet. In the first column I have data validation drop down list. I want to be able to: if the first column "Other" is chosen then the next cell will allow text for description, if anything other is chosen in the first drop down list cell then I want the next ( text for descritption ) cell to be resticted.
I have a question about using the form input method for an inventory sheet. My issue is that I want to have a column of cells have a predetermined text acronym "THS-"
I thought to place this in the column by copy pasting but then when I run the Form input for each row and column it gets errased.
I have a data set that shows numbers for categories over time. I would like to add the data label to the numeric value and then sort the data by the original number. Is this possible?
Here's an example
A 1 2 3 4 B 5 7 4 1 C 8 0 2 1 D 3 4 9 5
I would like each column sorted independently based on the data in that column, but I want the results to have the label from column 1 concatenated with the value in the other columns such as this:
A1 C0 C2 B1 D3 A2 A3 C1 B5 D4 B4 A4 C8 B7 D9 D5
Each column is sorted by the numeric value, but has the name label from column 1 attached to it.
I have a spreadsheet with thousands rows of items on. I am trying to identify duplicate entries based on two or three cells within each row. If those two or three cells are duplicated for that particular ID then the duplicate entry (row) should be highlighted for deletion.
Better still it would be great if there was a macro or formula which would delete that duplicate row.
So for example on the spreadsheet I have attached, I would like rows 6 and 9 deleted or highlighted as the criteria for deletion is a duplication of the entry in the 'YEAR' column AND the 'VALUE' column for the REFERENCEs AB-1234 and AB-9876 which are the unique identifiers for each individual case.
This would leave the end result as per the table below on the attached spreadsheet.
