compare one coloum with another and return a corresponding value in the adjacent cell. For example
I have 4 colums A,B,C,D. In "column A" I enter Products names (Example- Apple, Orange..)and in corresponding Coloumn B, I enter Product Codes (01 for Apple and 02 for Orange etc..) When I enter Apple in coloumn C for 10 rows (C1 thru C10), I need to get Code 01 in Column D in all rows (D1 thru D10)
[URL]
I had this posted in Formulas and functions
I have, 10 combobox, if the user makes click in the combo,start the event combobox1_change, and the value of the combobox is searching in excel, when find it, move one cell toward the cell of the left, and the value of the cell of the left is shown in a label, that work.
But I need copy teen time the same code? (My english is very bad)
this is the
Private Sub ComboBox2_Change()
If Sheets.Application <> "Materiales" Then
Sheets("Materiales").Select
End If
Range("H:H").Select
Cells.Find(What:=ComboBox2.Value, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByColumns, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
I have a userform which manipulates data based on the userselection from the combo box. I have setup the userform so that the user may select up to 3 sheets due to the presence of 3 combos boxes. I need to writing an IF statement which checks to see if combobox1 is occupied to carry out a function, followed by it checking to see if combobox2 is occupied to carry out the function, and then checks to see if combobox3 is occupied and carries out the funciton.
As such, if only 1 combo box is occupied it would then only carry out the operation on combobox1's selection, and if none are occupied, nothing occurs, the box simply stays open. This is what I have so far, I know there is probably a more eligant way of writing such a If/Then/Else statement
Sub Start()
If UserForm1.ComboBox1.Value And UserForm1.ComboBox2.Value > 0 Then
Call Find1
Call kTest1
End If
If UserForm1.ComboBox3.Value And UserForm1.ComboBox4 > 0 Then
Call Find2
Call kTest2
End If................
How do I check the information from a user selection of all comboboxes on a multi-page control to format a worksheet?
A few more specifics: There are roughly forty comboboxes on a multipage with six tabs. The comboboxes contain a list of choices for how different aspects of the project are financed. I want to check for whether the user has selected a specific entry. If any of the forty comboboxes have made that selection, some code runs that formats the column of the worksheet in a specific way. I have written the code which formats the column, and it works fine, but my attempts to run the check mentioned above, have not worked. The code cannot check based on .listitem, it must check based on a specific string.
A few more clarifications: It doesn't matter whether all forty comboboxes have this selection, or one; if any of them have the selection, the code needs to recognize this. The code would currently run off a command button which performs a series of calculations, tests, and then runs the code to format the worksheet.
I have two comboboxs on a userform, both are populated like this:
(ComboBox1 is a different sheet/column)
' Sets Remarks in ComboBox4 Contents
With Worksheets("Data")
Set rng = . Range(.Cells(1, "C"), .Cells(Rows.Count, "C").End(xlUp))
End With
With ComboBox4
.RowSource = rng.Address(external:=True)
End With
The function is that ComboBox1 will populate the names on lets say Sheet1, Column A, and when selected will populate by offset all the other Textboxs, and ComboBoxs.
Textbox1 is a date
ComboBox4 is populated off of items from the data sheet
ComboBox1 is populated off of sheet1 and provides names, then fills the userform fields
In populating the Userform, it fills Combobox4.value by the offset value of the selected name.
That cell does not contain the same info that was loaded into the ComboBox initally, and it does not show it. All other ComboBox entries match preloaded values, and show.
How do I get the ComboBox to display what is in the OffSet cell value, rather than blank because its different?
Not overly familiar with ComboBoxes but what I want to do is load a ComboBox with data based upon the selection of another ComboBox
Please see attached example.
ComboBox1 - I can get to load.
ComboBox2 - I want to load but only those lines that match the above selection
TextBox - Load with the data on row selected by ComboBox2
I have a list of country names in a listbox that are populated using another worksheet that has these country names. When I make a selection in the listbox, I want the same country names to be highlighted in the worksheet. I will then be able to run a macro that takes those selected cells as input.
View 3 Replies View RelatedI have a sheet with several entries. I want to find a way to have the user go to a specific cell instantly. What I thought I'd try was a combobox that when I click on a name in the combobox. It will make the matching name from the list the active cell.
View 9 Replies View RelatedIs it possible to have a combo box in excel, where, when an item is selected, it is assigned a colour depending on which item it is? Eg, The combo box list has item 1, and item 2. If I select item1, then the text becomes red, if I select item 2, the text becomes blue. If not possible using combo box, what method can I use?
View 2 Replies View RelatedI'm trying to make a budget type spreadsheet for a club I run. I have a popup box where I click what was purchased, and now I want a drop down list of all the members of the club so that when I choose one name it is inputed beside what was purchased (I hope this makes sense !). I've managed to make a dropdown list in a dialog box but I don't know how to make it so that the name I choose is inputted into the spreadsheet.
View 2 Replies View RelatedI have a dynanic range named Room on B1. My combobox1 rowsource is linked to the Dynamic range Room. I would like to be able to delete the the specified selected room from the combobox and the next 3 column C,D,E (delete Shift cells up)
View 2 Replies View RelatedLet's say I have pivot data in the form of:
| Major Category | Minor Category |
toys | balls |
toys | puzzles |
toys | blocks |
clothes | shirts |
clothes | pants |
I want to loop through every minor category and display it and its major_category on a different worksheet. (I'm doing more than this, but for simplicity sake ...
My attached files contains stock returns for companies. Each sheet contains the returns over a 5 year period for a certain stock, with the ticker symbol of the stock used as the sheet name. I want to write a sub that presents the user with a user form. This user form should have an OK and Cancel buttons, and it should have a list box with a list of all stocks. The user should be allowed to choose only one stock in the list. The sub should then display a message box that reports the average monthly return for the selected stock.
View 4 Replies View RelatedI use the code below to enter a value from a list box in a cell on a workssheet. Is it possible to code VBA to enter a number for the position of the selection in the listbox to a cell in a worksheet rather that the actual value from the list box. For example if my list is:
Option1
Option2
Option3
And I click on Option2 in the list, I can sennd the value 2 to a cell on the worksheet rather that the value "Option2' from the list.
Private Sub ListBox1_Click()
Sheets("SA").Range("SA_Poistion_To_Archive_A_New").Value = ListBox1
End Sub
I have a set of data on excel and would like to make searching for it easier.
I have created a drop down list in cell B4 (say, "Banana", "Apples" and "Orange"). Is there a way that if i select "Banana" in cell B4, excel will automatically go to cell A20 ?
I am hoping to create a drop down list of months in one sheet, and when I select a certain month, columns in about 10 other worksheets in the same workbook will either hide or unhide columns...
The spreadsheet is laid out with columns (C-N) for each month in the year, for actuals, then columns for budget and budget variance (O-P), then YTD Actual, YTD Budget and YTD Variance. When I select September, for example, I want October-December to hide, and leave Jan-Sep unhidden, while keeping the budget, YTD and variance columns.
Is there a VBA code that can achieve this?
I am trying to find a formula that references a cell on a spreadsheet (H7) which is really a Combo Box that is located on a range of cells K25:K30. I want to put a formula in H18, but of course, the combo box always references the range on K. i have tried the $K$25:K430, but i don't know what i am doing. The drop down menu and everything works fine, but the data IS stored elsewhere. HOW do i tell Excel to look at K25:K30,(depending on choice within combo) and then ad H8:H19? I have looked, but all answers are for forms. I am doing this for final exercise for a university course, and (hmmhmm) must folllow obtuse instructions.
View 7 Replies View RelatedI have a combo box, which is used after a search. The box only identifies a list of cells, but to the right of that, is somemore info that i need.
I would like it, so when you bring down the list window, and pick from the list, it knows which Address it is, so it can then HLOOKUP the information in the next column.
I can't seem to make it happen. I either cannot get it to let me know the Address of the cell I had choosen, or I cannot make it look to the right, and put the contents into another text box...
I have something like this:
Addresslist.plant = addrlist.offset(,5).value
how do i make it find the location ie $D$5 of the of item i selected from a combo box?
I need VBA code to do the following:
When cell H2 = "Weekly", I need cell I2 to return "50".
When cell H2 = "Bi-weekly", I need cell I2 to return "25".
The value in Column I should change as soon as the value in Column H changes.
NOTE: The value in Column H is chosen from a Data Validation List.
I'm assuming offset is the best option?
I'm using combo boxes. Initially I used combo boxes from the Forms toolbar, however the text in the combo box was to small. Now I'm using combo boxes from the Control tool bar. However, i would like the link cell to show the number of the entry in the list (like the forms control box) and not the actual entry. Is there an option I need to select in properties, or is there some VB code I can attach to the combo box ?
View 4 Replies View RelatedI need to search from a multiple column and return its corresponding outcome . Make it simple,
Price Fruit Vegetable
5 Apple Tomato
12 Banana Carrot
29 Watermelon ginger
what i need is a formula where when i key in either the fruit name OR the Vege name, its price will shown on a cell.
I try with Vlookup..but as I am new and i failed when i try 3 x 3 range.
I have a list of product IDs in one col. In another 2, I have date and vendor that each items was sent. Note that each items can be sent several time to different ven for at different date. From this list I would like to build another list that shows me WHEN & WHERE each item was last sent.
I was able to find a formula to return a list of unique item for my product IDs, but get stuck on the next step.
I am looking to return a sequential list of items which match to an element of text that I have selected. An example will explain what I want better.
Item Selected Tom
Ref AmountTom C 32206 3683Tom B 36212 34464Frank 10552 43642Mary 13228 30534Tom A 30694 35798Mary B 9121 27489
So I want a Formula which will return the Reference for items in column A which contain the word Tom.So the Result I want is:Selected
Tom C 32206 3683Tom B 36212 34464Tom A 30694 35798
The formula I have to return an item containing Tom is:
=INDEX($A$5:$A$10,MATCH("*"&$B$2&"*",$A$5:$A$10,0))
But this only returns the first Tom and no other.The Formula I have to return sequential items with exact reference:
=INDEX($B$4:$B$11, SMALL(INDEX(($B$2=$A$4:$A$11)*(MATCH(ROW($A$4:$A$11), ROW($A$4:$A$11)))+($B$2$A$4:$A$11)*1048577, 0, 0), ROW($A1)))
This will (if I change the row reference at the end) return all Tom C's (If I change B2 to "Tom C") in sequential order but only the Tom C's and not the other Tom's (Tom B and Tom A). I have tried replacing the $B$2 with "*"&$B$2&"*" but that doesn't seem to work.
I want to get the value for the selected item from the combo box in excel. I don't know very much excel but I want do this forlmular.
See attachment. I want in this box real value…. If I choose livingroom I want to show value of livingroom = 20
I am trying to see if there is a way using count or another option, of using one formula to look in a column and then spit out how many of each item are there:
i.e: lets say it says a, b, c, d etc...
Can a formula go through and say you have 3 of a, 5 of b and so on
I understand the basic of count sum iserror etc, just not sure if excel can do what I am wanting or if i should use access.
i need a formula in Cell B2, that will look in raw data and then look for the team in criteria (named range) then return the number of item for each manager....
View 9 Replies View RelatedI have a spreadsheet!
I have two sheets, one of which contains film names and the other contains our tag structure for our website (which is a list of tags, their keywords and the primary parent channel they live under).
What I am trying to do is search the film titles and if any of the words match either the tag name or keywords then return the relevant channel.
Example:
Sheet 1 - Films
How To Apply Bridal Makeup
How To Fight A Donkey
How To Write Excel Formulae
Sheet 2 - Tags
Channel / Tag / Keywords
Tech - Microsoft - windows vista xp word excel
Tech - Computers - internet pc
Tech - MP3 Players - iPod Zune
So, for film 3 on Sheet 1 it would recognise the word Excel in the keyword list and return the channel Tech.
Excel Userform
VB:
'enables user to click [U]highlight and select[/U] an item in ListBox1 and ListBox2 item (same row in index) is also [U]highlighted[/U] (highlighted only not selected)
Private Sub ListBox1_Click()
ListBox2.ListIndex = ListBox1.ListIndex
End Sub
Question: Is it also possible to enable a user to click to select an item in ListBox1 and ListBox2 item is also selected simultaneously (same row in index). Is there excel vb code to do this?
I think the code may be along the lines of the ListBox SelectedIndex property. What would be the Excel VB code equivilant for the ListBox SelectedIndex property, if so?
numberdesc
1_______yellow
1_______yellow
1_______blue
2_______purple
2_______purple
3_______green
3_______orange
4_______black
I need some way that can identify when the item in the description column doesnt match the first item of the same number- for example, here the 1-blue and 3-orange would be flagged because they should match the 1-yellow and 3-green.
I need to do this on a much larger scale (approximately 20,000 data points), so I wanted to create a formula or macro that could do this for me.. I thought making a reference page with would work but I keep getting an error.. I haven't done VBA in a while, so I may have syntax errors.
If Range("A2:A9").Sheets("Sheet1") = Range("A2:A6").Sheets("Ref") And Range("B2:B9").Sheets("Sheet1") = Range("B2:B6").Sheets("Ref") Then
Range("C2:C9").Sheets("Sheet1") = "x"
End If
