I have a workbook with 250 worksheets and I'm trying to build a single userform to work with all of them and I'm using binding to do that. Reason for using binding is that information is scatered all over the place, I mean a single column contains more then five different types of data with blank columns left in-between to be used as seprator, I know it's one of the worst ways to arrange data. Anyhow, the best part is that all the worksheets have the same type of information in their cells as of any other worksheet so binding does seems to be a good way to go ahead but only if it's dynamic enough to change accordingly with the worksheets.
Now I have already created a navigation-bar for it so I can use the same code for a drop-down menu list but what worries me the most is can I able to use a single form for all the worksheet and could it be done through binding?
Is it possible to have a single userform put data into two separate sheets within the same workbook.
I have a userform set up for entering client data into a quote register,with no problems ( sheet 1)
A1, A2, A3, A4, A5, A6, A7, A8, A9
What I would like is for the data to also go to sheet 2, where I have a form set up to print off for our technicians to take on site.
The problem will be that I would like the data A1, A2, A3, A4, A5, A6, A7, A8, A9 not to store on this sheet after it is printed, so the next set on entries , can be printed etc.etc
I am trying to create a Macro for taking information from a master sheet "sheet1" and dumping it into another worksheet based on a single variable in "sheet1". I have attached the excel workbook for reference. In detail, I would like to pull all of the rows where cell "F" in "sheet1" equals "1" and dump them into the new sheet titled "Dept1" with the same headings. The same for all rows where cell "F" in "sheet1" equals "2" to dump into the new sheet titled "Dept2".
trying to copy data from multiple sheets to one single sheet. I am pretty sure this is possible. The problem I am running into is that the number of sheets at any given time is dynamic. The numbering of the sheets is from 000 to 999 (they must be a three-digit code). The other issue I am having is I only want to copy the rows in each sheet that have an "x" in column "A". Also, the row in which the first "x" occurs can differ from sheet to sheet. I have attached a copy of the spreadsheet that indicates how the spreadsheet is layed out.
I recieve a daily spreadsheet with ~25,000 rows of data and is 4 columns wide. Each day I need to break the data equally up into 19 or 20 different sheets within the same workbook. This is very time consuming as I need to copy the first ~1,000 rows and paste it into the first sheet, then I need to take the next ~1,000 rows and paste it into the second sheet, and so on.
I have attached a small example with desired output. In my example, the raw data file contains 19 records. For these 19 records, I need to distribute the records evenly between 5 individual sheets. In this case, each sheet will contain 4 records or less.
The worksheet is formatted as follows: It contains data in columns A-L. I want to breakdown the data further into sheets according to the data that is found in column G. As an example, say I have 1,000 rows of data and in column G there are a number of different branch numbers in each row. So there may be 250 rows with branch 450, another 250 rows with branch 360, another 200 rows with branch 777, and finally 200 rows with branch 888. In this case I want to create 4 new sheets (450, 360, 777, and 888) and copy only the data in the main sheet that corresponds to same branch.
Actions would be as follows: copy 250 rows to tab "450" copy 250 rows to tab "360" copy 200 rows to tab "777" copy 300 rows to tab "888"
Any comments are much appreciate. I have attached a data sample along with desired output, if needed. One note: the data comes in each day as one single sheet of data and the number of branches varies day-to-day, as such, code would need to create new sheets for each branch found.
I have a workbook with many sheets labelled as mmm-yyyy. The constant columns in all the sheets are C,E,R,T, and U.
Is it possible to have a macro do the following: Add a sheet called Summary at the end of the workbook. From the last sheet of mmm-yyyy, copy columns C, E, and R to the Summary sheet. Copy columns T and U from all the other mmm-yyyy sheets to the Summary sheet. All the cells need to be centered.
I have a workbook containing about 20 sheets. I need to find a way of pasting all the numbers in the A column in each sheet (sheets 1-20) to the last sheet so I get a great big list of all the numbers in the 20 sheets. How would I go about doing this?
Right now I'm cutting and pasting from sheet 1 to my last sheet, then from sheet 2 to my last sheet, then from sheet 3 to my last sheet... Is there a quicker way? The ranges in each of the sheets start at A2 and go down a few cells. Sheet 4 might have 4 numbers in the A column, sheet 12 might have 47, sheet 17 might have 8 and so on.
How would I go about getting all the A columns in the sheets to the last sheet?
I'll throw up a few screenshots if the problem is unclear
I need a macro that will take hours by day (columns) by service (rows) per client (sheet) and summarize the data into one database of rows containing client, service, date, and hours. The "Summary of Charges" should only include service hours > zero. I am attaching a sample file. I have little to no experience with vba so I don't even know where to begin. I can copy code.
my macro comes up with an error on the Consolidate line that says 'Cannot add duplicate source reference'. I have a workbook with a variable number of tabs and I want to consolidate-sum (not copy and paste) the data from the various sheets onto a summary sheet within the same workbook. I'm at the point where it all works fine until it hits Consolidate.
Option Explicit Sub ConsolidateExport() ' ' ConsolidateExport Macro
Workbook1 has only 1 sheet (Sheet name is Final) with multiple rows Tiger,Lion,Goat etc..
Workbook2 has multiple sheets (Tiger,Lion,Goat .... so on)
Each sheet Tiger, Lion, Goat has different no of rows but same no.of coloums.
I want to copy the data from all the sheets in Workbook2 to one sheet Workbook1
ie., once i execute my macro the final output in Workbook1 should contain Tiger under that all the rows from sheet tiger(Workbook2),Goat under that all the rows from sheet Goat(Workbook2) ,Lion under that all the rows from sheet Lion(Workbook2).
Here rows should be inserted in Workbook1 and in these inserted rows we should copy data from respective sheets of Workbook2
I have an master excel file with 20 sheets with names x,y,z,a,b,c,f,.... Each and every sheet has data which start from Row 7 and Column 2. Now i need to consolidate this data in one sheet in another excel file.
Consolidation should be like
Suppose X sheet has 20 rows and 4 columns of data which starts from Row 7 and Column 2, this data has to be copied and pasted in my new excel file copied on my desktop. Now first 20 rows are occupied in new excel file.
Now code should move on to master excel file Sheet Y which has 45 rows and 4 columns of data which starts from Row 7 and Column 2,this data has to be copied and pasted in my new excel file from row 21, which means Master excel file sheets has to be clubbed to one consolidated excel file.
In All the sheets in Master file Data starts from Row 7 and column 2.
Data range varies row wise in each sheet but column length is fixed to 4.
I inherited a spreadsheet that had an userform where the user checked off which 'pages' he wanted to print. The Ok button routine used if statements to run a routine for each 'page.' Here's an example of the original code for one page:
Sub Button2_Click() Sheet7.Activate Run "HorizontalPrintStuff" 'generic landscape pagesetup With ActiveSheet.PageSetup 'specific pageset settings .RightFooter = " Construction Assumptions" .PrintArea = "CONSTRUCTION" 'the named range to print .Zoom = False .FitToPagesTall = 1 .FitToPagesWide = 1 'this changes depending upon the page selected End With ActiveSheet.PrintOut End Sub
The problem was it printed each page as a separate print job; and if you print to adobe, you get serveral files, not one file. That and it took a long time to run.
So I tried a different tack. If the checkboxes has true, then the printarea is set to that named range. If there were more than one named range on a sheet to be printed, I consolidated them. I did this with a bunch of if statements - very cumbersome.
Sheet3.Activate 'Sheet3.ResetAllPageBreaks 'disabled due to errors Run "HorizontalPrintStuff" 'generic landscape pagesetup With ActiveSheet.PageSetup 'specific pageset settings .PrintArea = "DEVBGTALL" 'the named range to print .FitToPagesWide = 4 'this changes depending upon the .FitToPagesTall = 1 End With
I haven't shown all the code cause it goes on for 12 sheets containing 16 different printareas.
My current muck ups are .....
1) it prints every printarea/named range on a given sheet (I took out all the if statements trying to debug everything.) Is there another conditional argument that allows for multiple 'trues'?
2) the pagebreaks in printarea/named ranges that are multiple pages (like a 48 month schedule) won't stay set. I've tried both VPageBreaks(3).Location:= and .VPageBreaks.Add Before:=
3) the Sheet1.select false argument is always adding a random sheet to the end of the print job. Don't know why.
I can do all this in a recorded macro, just not the selection userform. I've thought about copying to another sheet or hiding columns and rows then printing, but that seems just as cumbersome.
To recap, i want to print out, as one print job, multiple printareas from mulitple sheets, based upon checkbox selection on an userform.
I am trying to come up with the most efficient way to copy data to multiple sheets within the same Excel workbook. The original data exists within one column on a summary sheet (could have up to 500 individual entries). I want to copy each individual entry to a unique sheet (that already exists), but in the exact same cell location within each sheet. I would only want to copy the original data value and not any formatting. Is there an efficient way to do this?
In my example spreadsheet, the original data is on the SUMMARY sheet. Sheets A through J would be the target sheets, with cell B2 as the target location for each of those sheets. My example shows the result of a manual copy paste value process, but I am hoping to automate that.
I have workbook with 12 sheets in it. each sheet is identical except that they are for each month of the year. i am using a userform to enter the data into each sheet. Each sheet will have different data.
I want to be able to use the same user form on each sheet but still have them insert into the open sheet. Currently I am creating duplicates of the userform for each sheet but it gets VERY!!! tiresome and it is making the workbook VERY large (5 mb so far). For example. the first sheet is "april". i open the userform and enter the data into the userform. the userform enters the data into the sheet.
now i go to sheet "may". currently I open a userform in that sheet that looks exactly the same as the userform in sheet "april" but is a completely different userform. I want to be able to use the userform from sheet "april" in sheet "may" but when in sheet "may" it inserts into sheet "may".
I have created this with text, command & list boxes with a view to creating an asset register.
So the options i have are premises, hardware, software & fixtures. I have tested so that these go onto 1 sheet ( at the moment all additions go to premises) but i require for it to go to there respective sheets i.e. a sheet for each asset.
But, due to inexperience with userforms and VB i don't know how to do this.
Also, how can i get a sequential number coming up for each asset on their respective sheets
Find Multiple instances of Numeric Criterion in Row & Return To a Single Column.
I have a Dynamic Named Range "Data" spanning 10 Columns and many Rows. Each Row may contain duplicates of the Numeric Criterion.
I would like to find ALL instances of a specific Numeric Criterion across each single Row in the Dynamic Range "Data" and have the Results returned to a New Sheet in a single column.
NEW Sheet: The Numeric Criterion is housed in G5. The matched criterion should be returned to the New Sheet starting at G7. Duplicate instances in the same Row should ALL be returned to the same cell in Column G on the New Sheet.
Sample Data Layout: Columns I J K L M N O P Q R Row No.76 1 0 1 1 0 1 1 1 0 1 Row No.77 2 2 3 2 1 2 2 0 0 0 Row No.78 3 3 3 3 3 0 3 0 3 0
Scenario: Looking for Numeric Criterion 1 (one).
Expected Results - New Sheet: Row No.7 Column G (Cell G7) 1111111 Row No.8 Column G (Cell G8) 1
In Row 76 of the Sample Data ALL seven Numeric Criterion of 1 (one) should be returned to the same cell G7. In Row 77 of the Sample Data there is only one Numeric Criterion of 1 and it should be returned to cell G8.
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project Benefit Type Delivered or Enabled Benefit
PJ1 Financial Delivered Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered Financial - Enabled Tech - Delivered Tech - Enabled Green - Delivered Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
I want to create a certification only list on a separate tab of training that has been completed where a certification has been issued (as indicated by a "Y" in the "Certification?" column on the training tracking tab) and then populate from some of the fields vs. all of the fields.
What I have now, only pulls the first occurence, not all occurences. I saw that I could have identified the multiple columns that needed to be populated, but it didn't work either, so I'm fine putting a separate vlookup in each column.
I am looking to split multiple different entries in a single cell into multiple columns and repeat this for all rows
Example (I have the below in a single Cell as column headers) NCM Server Mgmt VLAN Site ID
Next Line down is the data (Each row in a single cell) Enabled 10.10.10.0 50 TEST SITE 1 Enabled 10.10.20.0 50 TEST SITE 2 Disabled 10.10.30.0 50 TEST SITE 3
How I could achieve this as I have a number of projects where this would become useful
I know you can use delimiters but with spaces between the values I just can't fathom a way forward.
I'm loving these new formulas that i'm learning here and applying them to whatever sheets i come across to make my life easier at work...
So now i've created another worksheet, this one is to help my colleague who wastes atleast an hour everyday to generate a consolidated report of our bank accounts...
Now i've sorted out half of the report where he can give an overview of the position of cash flow on a daily basis.
Theres however 1 more addition i wanted to make to make this workbook absolutely perfect!
On sheet 2 (which is my consolidated report sheet) I want to add all the transactions that occur on a particular date from all the different bank accounts (Each account having a seperate worksheet)
I'm not sure if advanced filters can achieve this or not or even easier/short macros... Any tips/hints as to how i can achieve this would be awsome..
I've attached a sample workbook which has sheet1 for a bank account and sheet2 for report generation...
I want to add all the rows having "Clearing date" (column A) in Sheet1 to report date in Sheet2 ..And this for all the account sheets i can add...
Col L John Doe New York Past Locations Previous Jobs Male Previous Schools
In Sheet 2, I have another list where the user will manually enter sub elements for some of the elements of Sheet1. It looks like this...
Column A |Column B |Column C Past Locations|Previous Jobs|Previous Schools
Below that last row of headers, the user will make inputs. the list for each column should be able to run down to say 100. The inputs may look like this....
AZ |Plumber |XYZ Elementary MD |Waiter |ABC High School IL CA
Now, the problem is I need to combine these two into a single column in Sheet 3 in a special way. The output would look like this.
John Doe New York Past Locations AZ MD
[Code] .....
Notice that I am taking the list in Sheet 1 as is, until i run into a value that is the header in Sheet 2, in which case I take all the contents of that header column until I am done, and then go back to sheet one, and repeat the process. I need the output in one column in Sheet 3; i don't need any special formatting.
I have 2 sheets with a list of account numbers and values on each (Column A = AccountNumber, Column B = Amount) I want to combine this on Sheet3 which should include all accounts on the other 2 sheets. Some AccountNumbers only exist on on one of the sheets.
I am trying to populate a 3 column listbox in a userform from SQL Server via ADO. When the result set consists of more than one record, there is no problem and the data is displayed properly (ie each piece of data is in its appropriate column) eg...
however when the recordset returns only a single record, the data does not transpose and views as below (ie each piece of data in the record is on a different line in the first column
I am trying to modify the macro that I have put together so that it executes only specific worksheets within a single workbook. In this example, I would like the macro to update worksheets A, B, and C but I have more sheets in my actual file. I am only able to get the macro to work on the active sheet. Attached is my workbook.
VB: Sub HideColumns() Application.ScreenUpdating = False Dim myRange As Range For Each myRange In Range("B5:M5")
I am trying to combine sheets from various workbooks into a single file named "Combine". The goal is to have the sheets in Combine indicating their origin.
For example, with: "File_1" having 2 sheets, "Sheet1" and "Sheet2" "File_2" having 1 sheet, "Sheet1" the goal is to have a file "Combine-forum" with the sheets named: "Sheet1(File_1)", "Sheet2(File_1)", "Sheet1(File_2)"
I have grabbed pieces of code from various sources and read on the forums, but the result is different from what I want; I don't succeed to add the file name to the sheet name. Instead of the file name, the second part of the sheet name appears to be the order in which the workbook have been opened.
To be clearer, what I get is: "Sheet1(1)", "Sheet2(1)", "Sheet1(2)"
Attachments: To_be_combined.zip 3 compressed files to be combined. I suggest to copy them in C:TEMP and to copy this path in the InputBox (see below). Combine-forum.xlsm Best working file that I have been able to create
I have 30 and above sheets in a work book and like that I am having 5 such books. The sheets are named as 201, 202, 203 ....etc as per the contents in that particular sheets. (201, 202 .....are the P.O nos.). all the work sheets are of having similar format of datas.
Now what I need is if I want to look the details of one single sheet (say 324) I have go all the sheets one by one and it is hard to find out.
If any body give me a solution so that if I type a particular no. (forms part of the name of the sheet) that sheet should appear for me.
Call all data in new workbook or in single sheet from different sheets (except 1 or 2 sheet) of workbook. i already use some macro to hide some data from sheets so i want only filtered data.
