I need a formula to sum all E3 cells starting from sheet "Joe" to the last sheet i have, without being obliged to modify the formula for each new sheet i create and which by default is created in the end. something like:
=sum(Joe:my last sheet created!E3)

Also,do protected cells in some of the sheets affect this formula calculation?

I need help on Excel 2007 Macro , the below coding searches for a string "recvtiming" in a cell as a wildcard and delete it entire row once it founds it in a single active sheet.

Question,

1. How do I manipulate it to search for the same string and upon finding

a) Delete its cell content and all the contents from its right hand of side till its last column which have a value from the same row on all 50 sheets in the workbook.

I have a table form where sometimes I fill in 20 lines and sometimes only 3. Then, sub results for empty lines are N/A. The problem is that when I want to sum up all those sub results, instead of suming the numbers there are, ignoring N/A, it gives me N/A as the answer. How can I make it ignore those empty lines And how can I hide those N/A in the form to make it look better?

If Cell "B55" Cell is selected and I want to Select all the above rows to select till Row 1. Selected Row mught change Say B66 or B82 (Dynamic)

Whatever may be the Cell Selected, The result should be The above rows should get seleted. So that I want to delete the rows easily

HTML Code: ws.Range("B55").Select Range(ActiveCell, Activecell.Offset(-55,15)).Select 'This cannot work if the selected Cell is 65, So this should be Dynamic till above Range 1)

I'm in regional sales and need to track sales figures (column C) within a City (column A) within a specific date range (column B). See attached xls example file. I have tried nesting AND and SUM into an IF formula as well as an INDEX formula with no success.

I currently have a spreadsheet used to track attendance by person. Each row represents one person and the colums the days. Each day requires 2 columns, 1 to code the attendance type and the other to list the number of hours. What I need to do is calculate the totals in the times columns if the code is the same.

VB: Sub autofill() Range("A1").Select Selection.autofill Destination:=Range("A1:A1048576 "), Type:=xlFillDefault End Sub

but i need to select first cell in every 20th column and then execute autofill till the last row that excel provides. I can only do this manually but I have for now 125 columns to fill or to write some monstrous code. Unfortunately I do not have the knowledge to do this in a smart way and I guess there is an elegant way to solve this problem.

Dim MyData As Range Dim MyResult As Range Set MyData = Range("E1:E1000000") Set MyData2 = Range("F1:F1000000") Set MyResult = Range("J4") MyResult.Select Selection.Formula = "=COUNTIFS(" & MyData.Address & ",""=Kim""," & MyData2.Address & ",""=done"" )"

Is there any way I can change the code so that it automatically finds the last cell as Im using Range("E1:E1000000") and Range("F1:F1000000") because there will not be more than 1000000 entries.

Is there any way to sum up a conditional match among many sheets for ex:

If i have in sheet 1: A2= John A3= Bruce A4= David

In sheet 2 : B5= John F4= 5$

In sheet 3 : B5= Bruce F4= 20$

In sheet 4: B5= David F4= 14$

I need in sheet 1, B2 , a formula to return the result of F4 of the sheet which matches the A2 ("john") in the B5 of all sheets .result should be 5$ . Is that possible?

I am working on code to detect whether a cell contains an even or an odd number in it. I can do this when I know that the numbers I want to evaluate are in cells A1 trough A10 but the next part of the code is for when we do not know how many entries there are and we have to evaluate until we come across an empty cell and then stop.

I have a do while loop that runs until the reference cell is empty. This has been working but now I have changed the reference cells somewhat so that the cells contain a formula that returns nothing if a function returns 0 or an error. So the cell has no value but it does have a formula in it. The do while loop keeps running because it thinks that the cell has something it it.

Do While Cells(i, 2) ""

Is there something else that i can put for "" to get the loop to stop when cell contains no value but a formula.

How to modify a custom cell format to make data entry easier.

My goal is to have the output look like this: 'A12B-C20D: SET 10: Text string here'

Inputs needed are:

1-3 digit number between A & B 1-3 digit number between C & D 1-2 digit number after SET Text string of variable length

Where I am stuck. So far I can get "A12B-C20D: SET 10:" to show up properly when 122010 is input. The custom format I am using looks like this: "A"##"B-C"##"D: SET "##": "

When I try to incorporate the "@" symbol the first part of the formatting goes away and the output shows up as "122010 Text string here".

I have tried: "A"###"B-C"###"D: SET "##":";;-;_@ "A"###"B-C"###"D: SET "##": ";;@ "A"###"B-C"###"D: SET "##":";_@ "A"###"B-C"###"D: SET "##": ";;;@

How would one go about creating a macro that would sum values in column G based on a condition in F ( a "SUMIF" basically) until the end of the range?

The condition would be so that the first blank cell in Column G (starting from column G9 ie Range("G9").End(xlDown).Offset(1,0) would contain the sum of everything above up until the word "Total" (or even the string of 5 characters from the left say "Total") appear in Column F - (the word Total appears a few times in column F, so it should detect the first applicable one)

The idea would be to have this repeated / looped until the end of the data range

Attached is an example and I hope what I have written makes sense

As for the worksheets:

"Final" is what it should look like (Blue Cells represent manual calculations)

"Working" Sheet is where I have it up to now

The sheet "Original" has a button that recreates everything up until where "Working" Sheet is

Can I have a macro code to insert a row from column A:K.

I have data in column L to IV which I want to stay as it is. i.e. for example when a row is inserted from A:K, that row should not extend beyond Column K.

I have a problem with a very simple Lookup (please see attached). When I copy/drag down the dropdowns in column A and the Lookup formula in column B, the lookup up does not recognise the value in column A till I save the sheet. The same if I select a different value from the dropdown i.e. the lookup only works when I save the sheet. Am using the wrong Function to do this or it something else.

I am running a formatting excel, and I will also need to select from cell P30 till last row, then sort alphabetically by moving the other rows data too.

I've uploaded my spreadsheet. I asked my professor if our formula had to take into account whether or not our payment would be changing. As long as I calculated the initial amount - which worked out to be around 30 dollars, I could assume I paid that amount for the entirety.

ASSIGNMENT 4

My latest Mastercard statement shows a balance due of $1,696.96.

Based on recent bills, assume that the minimum payment amount is computed as follows

(balance_owed)*(annual_interest_rate/12) * 2, then rounded to the nearest whole dollar amount.

The minimum payment amount is the amount calculated above or $25.00, whichever is the greater amount.

The annual interest rate for purchases is 11.24%. If I make no more purchases and always pay my bill on time how many years and months will it take be pay it off at the current minimum payment amount each month?

How much total interest would I pay if I repay the loan this way?

What fixed monthly payment amount would pay off the debt in 2 years?

Assume monthly compounding of interest. All calculations are to be done in the Excel worksheet.

The functions NPER() and PMT() will be useful. Note that either the Present Value or Payment amount should be negative (not both) because of conventions concerning the direction of cash flow."

This is part of the bigger excel sheet. I would like to write a macro to find the column D6 based on the location of text 'committed total' . Then addup all numbers from E6 to V6 and write total in W6. Then add d6 and w6 and place it in X6.

can i use the countif question to make it count till a particular row based on the value . for instance if i want the countif till value 45 is met i.e i want countif to count till the row where 45 value is housed

I've normally just dynamically selected a range using the xldown feature but because this row contains formula it goes always down to the bottom of the formula instead of the last cell which isn't blank.

How would i go about generating this dynamic range that stops at the first cell that contains no value (but has a formula)? Perhaps a do while loop which looped down until it hit the first blank and then assigned the cells it had looped through as the range?

I have a control chart macro which is being used for patient doses of a medication. Right now my macro automatically fills columns D-N down to row 100. However, I would like it to stop at the last row of data entered in column A. I have attached the code related to the formulae a

I am trying to start in cell A1, and loop down. Each time a value is found, I want to insert a blank row, which is working, but I just can't figure out how to end this, it goes to the very last cell in column A and gives a debug error. I would like to to just go back to cell A1 after all rows have been inserted.

Sub Insert() Range("A1").Select Do Selection.End(xlDown).Select Selection.EntireRow.Insert ActiveCell.Offset(1, 0).Select Loop Until ActiveCell.Value = "" End Sub