I got a problem though with specificying a 2d array. I basically want to click the "command button" and display one collum with names and the one next to it with results. The only problem is trying to get vba to display this on the work sheet.
I'm working with 2 different sheets, sheet1 and sheet2.
I'll type in entry 1 to 4. 2 comboboxes, 2 cell values. then click on the command button1.
i'll pass over the values to sheet2 like this: array(comboBox1.value, range("a2").value, comboBox2.value, range("a4").value
I was asked to check against the last time the user click on the command button. if combobox1.value, range("a2").value, comBoBox2.value, range("a4").value MATCHES exactly the last entry in sheet2, it'll give a popup Box before it continues.
The first Command Button ( called CommandButton22 ) displays the result of some other calculation as its Caption ... this caption will therefore be changing from time to time.
I would like the second Command Button (called EnterButton ), when clicked, to send the caption from CommandButton22 to whatever cell on the active spreadsheet the user clicked into just prior to clicking on the 'EnterButton'.
I would like each time that I click on the 'EnterButton' for the Caption in CommandButton22 to be sent to the next cell down and so on and so on etc.
I created a UserForm in which the user inputs data and then press "OK" in order to save an output into a specific worksheet. Once the "OK" button clicked, the UserForm repeats itself with some textboxes in blank so that a new output can be generated.
I am trying to display in a Label of the UserForm the number of times the "OK" button is clicked BUT starting from one. In other words, before pressing "OK" the Label indicates "unit no1" and once the "OK" button is clicked it should go "unit no1 +1" and so on.
For that purpose, I am using the following code:
The label displays Unit nº1 when starting (which is right). However when I click the OK button it still displays "unit nº1" and then it starts counting normally.
The thing is that it should display "unit nº2" from the 1st "OK" click.
I have attached my excel database, as think I'm having a funny moment, I keep getting an error message of Object Reuired when I click on the form button to launch the Input Form, where have I gone wrong as to why the Input form will not load?
i want the user to be able to change the cell color on the click of a command button. the worksheet is protected. when the user click the command button the active cell changes to red and offsets by 1. then the work sheet is locked again.
The two problems I am having is 1. I want the range to begin from row 10, column k to column FD. all cells down
the second problem is the current code allows me to edit locked cell columns A to J ...
I am trying to develop a system to allow me select different parts from multiple sheets and then add them into a bill of material on a separate sheet.
I have written some VB script the best I can and it includes a 'commandbutton' to make it easy for the user of the workbook to use.
This is how it works:
Go to 'Step 1 - Manifold 8640' tab and highlight one of the yellow cells.Once you have selected a yellow cell, you then click the 'select' button above.The value (along with other values) are copied to the 'Smart Calc' sheet.Then you go to 'Step 2 - Gland Plate' tab, select a yellow cell, click the 'Select' button.Notice how the 'Step 2 - Gland Plate' value is entered into a different group in the 'Smart Calc' sheet - this is great................BUT
The issue I am having is:
If the user goes to 'Step 1 - Manifold 8640' tab, highlights the desired yellow cell then presses the 'Select' button twice, it will add two lines of data in the relevant 'Step 1 - Manifold 8640' section....This is ok.But when the user clicks a third time, the 'Step 1' data will overflow into the 'Step 2' section of the 'Smart Calc' tab...because the script tells the data to look for the next available line to write to. This is what I am trying to avoid!
Instead, i would like a message box to popup to indicate to the user that they cannot add anymore data into into the 'Step 1' or 'Step 2' sections of the 'Smart Calc' tab until they clear the data from within the relevant section in 'Smat Calc'.
I would like to set limits on where each 'Step 1' or 'Step 2' data is written to the 'Smart Calc' sheet (so it is within its relevant section). As you can see the script basically looks for the next available cell but this isn't really good when the data 'overflows'.
Note that you are able to highlight the yellow cells in the 'Smart Calc' tab and press the delete key, it will delete the data to clear the line. That is how i designed it to work so if the user makes a mistake they are able to just delete the relevant line and enter new data.
Userform1 on the attached file has a "Calendar" button to display a calendar that allows the user to select a date and have it placed in the Date Text Box. It simply doesn't work unless you click on the userform area where the calendar should appear - but how would the user know that?
How can I return name of a command button on click? I want to create some sort buttons on a sheet I will use regularly to speed things up. I thought if I could call each sort button by the column letter the button sits in I can use this in a single sub for all buttons
e.g the button sitting in column A is called "A". when i click the button, it returns it's name to a variable which I can then use to sort column A. I know I could create a seperate routine for each button but I was just trying to think of something neater.
This is probably really straight forward but cant see why it happens, the following macro works fine when called by a button created by the form toolbar but doesnt when called by a command button, get the runtime error 1004, "select method of range class failed"
I have read several articles saying using a command button as a toggle button can't be done but some articles have said it is possible using the state properties.
.State = msobuttondown .State = msobuttonup
Is there any way to combine this with the onaction property so that when you press the button, it stays down and activates a macro then when you press it again it pops back up and activates another macro.
i have a workbook , workbook A , workbook A has 5 command buttons with different names on them., i want a macro code , i have some data on workbook A as well , as soon as i click one of the command button suppose user click on B, data gets copied and gets pasted into the workbook B , which is in different folder .
I am trying to make it so that when you double-click in a cell in column A, a message box opens populated with the text string in the corresponding cell (same row) in column Z. Seems to me like it should be easy enough, but despite spending the last hour searching for clues, I can't seem to figure it out.
I have a userform that has one combobox at the top created manually. When the userform is opened, the user select an option in the combobox (these options are taken from a range on 1 worksheet). From the selection of the combobox, I use the comboxbox's change event to create and display 5 columns of textboxes and 2 columns of command buttons on the userform.
The number of rows of textboxes created depend on the option selected from the combobox since each option links to a different range of cells. Each of the 5 textboxes in each are set to be ".enabled = False" and display text as per the cell values within a range on another worksheet. 2 Columns of command buttons are created at the end of each row of textboxes - 1 is enabled and the other is not.
The creation of the textboxes and command buttons works as required. However, I am having problems with setting click events for each command buttons. When the 1st column of Command buttons are created, I need the click events to be created and filled out with 2 actions:
1. Enable all textboxes in the same row as the command button
2. Enable the other command button in the same row.
Here is the code I have so far that creates the textboxes and command buttons.
Each of the 5 textboxes and 2 command buttons have a unique name so the 1st row will have textbox and command button names of cTxtA1, cTxtB1, cTxtC1, cTxtD1, cTxtE1, CmdAmend1 and CmdConfirm1. The 2nd row will have the same names but with 2 on the end and so on. The bold sections is the code for the creation of the command buttons that I want click events for.
Private Sub CboTeamSelect_Change() Application.ScreenUpdating = False If CboGroupSelect.Value = "" Then Exit Sub Dim cTxtA As Control, cTxtB As Control, cTxtC As Control, cTxtD As Control, cTxtE As Control Dim CmdAmend As Control, CmdConfirm As Control Dim iNum As Integer Dim TxtTop As Long
I have searched this topic but I came up with nothing regarding my exact situation.
I have 5 buttons on sheet 1. I want them to all direct me to another sheet in the same workbook. However, some buttons will contain more than one sheet.
Example: Button 1 will direct me to 4 different sheets. Is this possible?
Also, When I open the workbook, I see many sheets that I am working from but I do not want them to show up when I open the workbook. The only way to see these sheets is to click on the command buttons at the top of sheet 1.
in column A of a spreadsheet a date needs to be entered manually, however i cannot have it so it can be backdated or a weekend. I have seen a message box pop up if you try and enter a date prior to today saying , Please enter todays date , then gives you an option Retry Or Cancel. But im not familiar with this function.
Is it possible to have this if a date is enter and is either a weekend or a date less than today ?
I have this workbook with 10 sheets. Each sheet has macros that are called from a floating toolbar. What I am trying to do:
I want to create a msgbox that warns me when I click in a toolbar's button to call a macro that not runs in the activesheet. Something like: "This code (or macro) doesn't match (or run) with the active sheet.