I'm looking for a function which will determine if a target date is greater than or equal to THE JULY FOLLOWING A GIVEN DATE. In the attached spreadsheet the Start Date (B5) would be the GIVEN DATE Target Date is listed in ROW 1. In sentence form the function in cell G2 would be something like, "If G1 >= July following B5, then True.
I have a value in E12, and i need a formula that looks at the value and if it is equal to or greater than 5, then the output should be E12 x 500 +1000, but if the value in E12 is greater than 5, then the output needs to add the original 5 x $500 and now include all greater than 5 to be x by $250 + 1000. I got this far, but if the value is greater than 5, i don't get the original 5 * 500 that i also need.
My data has a bunch of near 0 figures followed by values I actually need followed by more irrelevant 0's than once again followed by values I need and again irrelevant 0's. Looks like
0.1 0.12 3.2 3.4 0.1 0.3 4.5 4.2 0.3 0.11
but with many more rows and numbers. I'm graphing the start and end values before/after zero's.
The first block of numbers I figured out using
=MATCH(TRUE,INDEX($C8:$C150>1,0),0)+7 I then index from that given row.
The span of relevant values I'm looking for constantly changes, so once my numbers deviate too much I stop, using another index formula.
Now for finding my beginning and end points for the next block of data I've combined using VBA with excel formulas. I can't quite figure this part out. I've created Variables for ranges and then used them to find max and min Values.
Public Sub RunCurrent() ' ' RunCurrent Macro Dim upEnd As Integer Dim dnStart As Integer Dim dnEnd As Integer
I have a spreadsheet with two dates for every entry. The first date is the "Projected Completion Date (F66:F139) and the second range is "Acutal Completion Date" (H66:H139). I want to sum all entries where the Projected Completion Date is Greater than the Actual Completion Date and then have that number divided by the amount of entries that have been completed (ie. Enties that have an Actual Completion Date entered. If the entries are outstanding then the Actual Completion Date field is left blank.)
I have an Workbook where on Sheet one it shows a date of a sold item in Column AH. On sheet two Column AG references sheet 1 Column AH. On sheet 2 I need it to delete the row if the date is greater than 1/0/00 ( which is an empty cell in sheet 1, but for some reason shows it as "1/0/00"). I have tried this code but I keep getting errors:
I have start date(Column A) and an end date(Column B) in two columns and I have found out the difference between them in column C in hh:mm:ss format. I want to find out how many cases are greater than 2 Hrs but less than or equal to 4 Hrs.
Its a training list, and I want to count the number of staff with valid training dates, I want to keep invalid dates as a reminder and I also have text N/A to disregard. Have used an IF function array but there are approx 33 column entries I want to add and using array function limits the amount of formula entries up to column 24.
Would be much easier if I used data validation to kick out the invalid date entries but we want to keep them if possible.
In my Excel spreadsheet I enter todays date in a single cell (A2), then I list various dates that jobs come into shop in other cells (A8:A108). I have cells ( F8:F108) where I have been manually entering an asterik (*) for those jobs equal to or greater than five days old in cell (A2). Is there a formula that can do the math for me? I've tried Excel help but to no avail.
I have been working on this issue for some time, searches let me down paths to tell me of the color of the cell, but can't put all the pieces together. What I am trying to do, is upon Clicking Command Button 1 it will go row by row of column D (there are 2 headers so D3 would be the first fillable data) looking for dates that is past todays date, if past, it will color the cell red then copy it to the next available row in sheet2 then continue, date past due, color red, copy entire row to sheet 2 looping until the end is reached
So I've got a vertical list of dates in M/D/YYYY format, and I'm trying to come up with a method to pull certain dates that are greater than a given benchmark and paste those values in another column. For instance, if I've got a list with 3/3/2008, 5/5/2010, 6/6/2011, and 7/7/2012 I want to pull only the dates beyond 12/31/2010 (so would be the 6/6 and 7/7 ones).
I'm assuming this isn't doable with one formula, so I would need a macro. But I'm having trouble just even coming up with the logical operator for just one date. I must be doing something wrong here. If my date in B2 is 1/1/2009 and I have a formula as IF(B2>12/31/2009,"True","False"), I just get TRUE, which shouldn't be the case.
In the attached workbook - the stock Inventory is increased, every second day, by the value shown in cells of column A. Column B displays the date of the update. I'm looking for a Formula (might be an Array Formula) that will return the latest date before the stock turns to be greater than the value in cell D3. I managed to solve it, in cell F3, but with the help column C.
I have to make a table that shows that a if someone purchases
less than 5 items they receive no discount 5-10 items they receive 2% discount 11-20 items they receive 5% discount 21-50 items they receive 8% discount over 50 items they receive 10%
and it has to be done in a way that the discount rate can be calculated using Vlookup I am struggling to find the best way to write this table. i tried numbering 1 to 50 and writing the corresponding discount rate in the second column but this looks untidy and can't calculate greater than 50 as i am not sure how to write it in the cell so it reads as >50 and not just 50.
I get sheets, sometimes 10 records, sometimes 1,000 records. And there is a time column. It's formatted as: hh:mm:ssam (09:12:36am). Now what I need to do is find a way to highlight any record that has a large gap between itself and the record before it. This gap amount can be variable, but for the explanation lets say, I need to highlight any record that has a gap of 5 minutes greater than the time before it.
I've tried a formula I found elsewhere:
But it just returns "#VALUE!".
I'm completely stumped, and since about last week, 1 of my daily responsibilites will be analysing anywhere from 10 - 50 sheets a day.
The guy before me would open the sheet and manually find it by literally looking from record to record. This was this 1 guy's full time job. From what I'm reading around there are ways to have excel do this for me with a simple formula and conditional formatting.
I have a program where I can update the calibration due date of an item. I have attached a cut down version of my program showing the relevant areas. There is usually password protection on the worksheet so it can only be edited via the form (the vba coding removes the password protection before editing, then re-enables the password protection after editing). The "Update Calibration" button is usually on a "Menu" sheet.
Once the form is opened a serial number is typed in the textbox. The calendar button is then clicked, which brings up another form with the calendar on. The due date is selected on the calendar. When "OK" is clicked, the date label caption is then changed to the selected calendar date. When "Submit" is clicked, the spreadsheet will search for the Serial Number, once found, the label caption (being the date selected) will be entered into the cell to the right of the serial.
If the day selected on the calendar is greater than 12 the date is entered correctly onto the sheet. example: calendar date selected = 15/01/2010. shown on sheet as 15/01/2010. However, if the day selected on the calendar is 12 or less, the date is for some reason entered incorrectly onto the sheet. example: calendar date selected = 08/12/2010. shown on sheet as 12/08/2010???? What is going on here? how come the day and month are swapped around if the day is less than 12????
I have collected some data on economic factors for different countries. Unfortunately, the dates when I started to calculated my economic factors are different for each country (due to the data available to me).
What I would like Excel to have done is to take the date when I started to measure for e.g. country A (D3 ie 30/06/2007), copy it into column "I" (for country A, it's cell I3) and fill in the following months in the rows below (with always the date of the last day of a month) until it reaches 28th of Feb 2013. Then, it should go up to the next country (country B) take the starting date (D4, ie 31/07/2007), go to the last entry in "I" (ie I71) and paste the date in, fill in the months until 28th of Feb 2013, do the same for country C and so on.
I have started to code a VBA but I am unfortunately a beginner in VBA and totally stuck at the moment. My VBA code does paste in the months but for some reason, it also changes the starting date of the first month.
Moreover, I tried a workaround for the fact that Excel doesnt know when to stop; ie I introduced a "monthdiff" variable which should calculate the number of months between the starting date (which is variable and unique for each country) and the end date (which is always 28th of Feb 2013). At the moment, it only does this for country A.
VB: Set rng = ActiveSheet.Range("I3" & Cells(monthdiff, "I").Address)[SIZE=4][/SIZE]
I have tried to make this dynamic but have been unsuccessful so far.
Spreadsheet with data&code is attached.
VB: Sub Macro1() Dim mainrange As Range Dim rng As Range