# Absolute Reference (cell Reference Behind The Table)

Mar 11, 2009I have a table that displays data from another worksheet. This is what the cell reference behind the table look like:

View 2 RepliesI have a table that displays data from another worksheet. This is what the cell reference behind the table look like:

View 2 RepliesADVERTISEMENT

I know how to turn a column reference in a structured data table into an absolute reference:

=Table1[A] becomes =Table1[[A]:[A]]

However, how to make a cell reference, like this one, absolute to that it still locks on this row, column A when I drag it across. I don't want to use copy & paste, as I have other cell references that i need to leave dynamic.

=Table1[[#This Row],[A]]

I've seen that @ can lock rows, but I don't seem to be able to lock an individual cell.

I have encountered some difficulty in modifying a macro I wrote into what I need. I created a macro that searches a column (Column C) for a cell value of, "stop", and then it copies everything above that cell and pastes it onto another sheet. In the sample data set that I was using, "stop" first occurred in cell C541, so the macro copies C1:C540 and pastes it onto another sheet. The problem is that the macro created an absolute reference to C540. What I desire is for the macro to use the 'Find' function to locate the first occurrence of, "stop", offset one cell above that cell, and then reference the active cell (which was positioned by these last two steps) in the range that should be copied. Basically, I'm hoping to have cells C1 through the active cell copied and then pasted onto another sheet.

Code below.

Sub FAIL()

'

' FAIL Macro

'

'

Sheets("Reformatted").Select

Columns("C:C").Select

Selection.Find(What:="stop", After:=ActiveCell, LookIn:=xlValues, LookAt _

[Code] .......

I am taking an online computer class and when i enter a formula (=c5/c11) and then press f4, to make the cell c11 absolute, this does not work. Instead it brings me the "Project" right side mini screen. Is there a way to program the f4 key to return absolute results?

View 5 Replies View RelatedHow do I copy an absolute cell reference from say a1 to a2 -100 so that the row reference increments with each row. Without the absolute cell reference '$' it works Ok. But with it every cell is the same as a1?

View 9 Replies View RelatedI have a number in cell A2. I have hundreds of numbers (dividends) spanning across row 1. I want that number in A2 to be the divisor in my formular all across row 2.

In cell B2... if I type the formula "=B1/A2" i get the quotient I want. If I copy and paste this formula into cell C2 the divisor changes as well as the dividend. How can I "copy and paste" this so that the divisor stays the same and only the dividend is variable.

I have a workbook with many tabs and within those tabs there are many hyperlinks to other areas within the same workbook. When I add or delete lines or rows, the corresponding hyperlinks do not stay with the changed cell. Is there any way to make the cell reference in a hyperlink an absolute similar to how you do with a formula?

View 2 Replies View RelatedI have a spreadsheet that gets updated from the top. Is there any way for me to mod my formulae so that they always begin with the topmost cell (row 2 in this case, and in many columns) but still extend downward?

More practical example:

I have an Average formula in column X which (at the moment) averages X2:X75. I would like, even when adding new rows at the top (in the row 2 position) the forumla to not need to be manually extended with every new entry. So, if I add three more entrie4s, it will then average X2:X78. I tried all manner of absolutes.

I have read meanwhile dozends of articles and comments about absolute and relative cell references.

But I found nowhere an example on how to make a the column part of a cell reference variable and the row absolute.

Is

K$10

a valid expression?

In opposite to $K10 is must work this way

I've got a worksheet here that i need to update every week. The problem i'm having is that i have a table of values that's drawing values in from another larger table. For example in B9 the cell is referenceing the I2 cell in another sheet. When i pull down the formula in B9 i want the cell below to reference J2 and so on. In other words, I only want the alpha characters to increment. Tried messing around with dollar signs but it doesn't seem to be doing what i want.

View 2 Replies View RelatedI have a workbook that contains a column, G, which includes a formula that calculates distances (based on lat, long coordinates) to a training site ("TS" going forward) from other sites within the same district as that TS. There are numerous TS's in the company, usually 1 per district (but some districts do not have a training site), and I am trying to find a way to change my distance formula that will automatically detect which site is a TS, and then calculate the distances of those other sites in that same district to their respective TS's.

As it stands, I have to manually change an absolute cell reference every time I encounter one of these TS locations in the file (designated by a "TS" in Col F), and rerun the distance formula down the column. I would hate to have to do this several hundred times.

Attached is a sample file. Again, Col G contains the formula for distance calculation, and you will notice that the absolute cell references change each time a TS is encountered -- I have been doing this manually. Additionally, I would be curious to know if there is a way to spot any Districts that lack a TS, as in District 493, and specify that in Col G.

I need a macro to do this small task for me. Preferably it should execute when I have selected a cell and press a command button. Here's the way it should work:

Copy the cell I have selected

I am currently using a color count function to both count by color and count by color and cells containing certain characters, such as # or %. This works great.

However, I need to modify the UDF to count all the cells in a range in columns C:Z that contain alpha, AND IF the Interior.ColorIndex of a cell in column B within the same row of the counting formula equals the Interior.ColorIndex of a cell in column B within the same row of the selected cell in the range.

Basically, Column B is a header row, and I want to count the cells in a range in each column C:Z if they contain a name AND their corresponding header cell's color in column B matches the color of the header cell in the row containing the formula.

i am currently using the macro below to import text files into a spreadsheet. Currently, it begins the import in cell A1 which is what I recorded it to do. how do I change the code to begin the import on the active cell?

View 2 Replies View Relatedcolumn headers are people in my department spread verticall goin down column A on my lead sheet. I am trying to report metrics for each person in their row.

I am trying to link the metrics for reporting from 5 seperate weekly batch reports that represent 5 tabs within the same workbook.

The problem is that I have the total information for each metic in column H of all 5 tabs, but all metrics for individuals are reported vertically. (H6, H7, H8, H9)

Thus how do I get the following: =SUM('Week 1'!H4)+('Week 2'!H4)+('Week 3'!H4)+('Week 4'!H4)+('Week 5'!H4)

To Equal: =SUM('Week 1'!H5)+('Week 2'!H5)+('Week 3'!H5)+('Week 4'!H5)+('Week 5'!H5) When I copy the formula across the row for each individual

My column to stay constant, but my row to increase by 1 as I fill the formula across my spreadsheet.

I am using name manager to identify variables in formulas in order that I can be consistent with calculations. The problem is each line item have different variable amounts. In other words if I am calculating cubic yards of concrete I used (Length*Width*Depth)/27. Line Item number one is (100*3*2)/27 based on my dimensions given. Line Item two may be (50*2*1)/27 based on different dimensions. The Name Manager has Length, Depth, etc. as absolute references. What I am trying to do is copy each formula down the sheet but each time I do the new line item always calculates from the reference cell in absolute mode. Is there a way to copy this formula all the way down the sheet so it will pick up the different dimensions keyed in each time using the Namae Manager Variables set up?

Line 1 (100 x 3 x 2)/27 = 22.22 Cubic Yards

Line 2 (50 x 3 x 1)/27 = 5.55 Cubic Yards

explain with an example.

Cell A1 =A2/MAX(A2:A5)

Cell A2 1

Cell A3 2

Cell A4 3

Cell A5 4

Cell A1 is 0.25 right? Right. Now insert a cell (or row) between cell A1 and A2. Then cell A1 changes to =A3/MAX(A3:A6). I don't want this to change. I still want to formula in A! to be =A2/MAX(A2:A5). I've tried using the "$" absolute character and I've tried using the absolute reference in the R1C1 reference style both to no avail.

Is there any way to check a worksheet/workbook to ensure that all formulas contain absolute references?

View 9 Replies View RelatedThis is what I need to be doing:

Write cell K5 as a relative reference, absolute reference, mixed reference with the row varying, and mixed reference with the column varying.

How do I do that?

I have an Excel workbook with multiple worksheets. One of the worksheets has a live data feed for stock updates. I extract data from the live feed (it's in multiple sentences) and pull it into 6 columns. In another worksheet, I pull those 6 columns into the sheet through the use of Index / Match. That second sheet has additional formulas that essentially analyze the data. As the data refreshes, the existing data moves down the column.

What I didn't think about was the fact that at times, a stock may be listed several times because different brokers are offering updates. Because I used Index / Match, it will look for the first match from the top and display that data in the relevant columns. Unfortunately, some of the data needs to stay with the matching row (and stock ticker) but because of the way I wrote the formulas in Index / Match, it just finds the first matching target and displays that data.

I can correct this by using an absolute reference ($) but I can't find a way to "copy down" formulas using absolute references. I also have one column of cells that contain 1 absolute reference and one relative reference.

I'll re-write this manually if I have to but I have 1,800 cells to change.

I have written some VBA code that is functional, but yields a formula that is somewhat confusing to the user.

I have two string variables called TippityTop and Anchor, both of which refer to specific cell addresses in the R1C1 style.

I attempted to define other variables that reference cells that are offset from TippityTop and Anchor without using the ActiveCell route. Try as I might, I could not produce the cell addresses that I wanted these new variables to reference.

I consulted many Excel Help screens and referred to a book on Excel VBA, but I finally took another route.

I now have:

ActiveCell.FormulaR1C1 = _

"=IF(AND(ISNA(MATCH(RC[-2],OFFSET(" & TippityTop & ",1,-2):OFFSET(" & Anchor & ",-2,-2),0)>0),ROUND(RC[-1],2)0),""DOV not in Treasury"","""")"

The problem is that this code yields this formula in Excel:

=IF(AND(ISNA(MATCH(L587,OFFSET($H$585,1,-2):OFFSET($H$798,-2,-2),0)>0),ROUND(M587,2)0),"DOV not in Treasury","")

Rather than OFFSET($H$585,1,-2):OFFSET($H$798,-2,-2), I would like the formula to say F586:F796, so that the end user can easily understand the logic.

I'm trying to create a user defined function to drop into dblookup functions that will always reference the first cell in an associated column and the first cell in the row of an associated column.

I came up with the following, however the problem is that the udf always returns the values for the active cell's, row and columns.

Function SRCref2()

Application.Volatile

myfield1 = ActiveCell.Column

Dim1 = Columns(myfield1).Range("a1").Value

SRCref2 = Dim1

End Function

Function SRCref3()

Application.Volatile

myfield2 = ActiveCell.Row

Dim2 = Rows(myfield2).Range("a1").Value

SRCref3 = Dim2

End Function

I would nest these in a formula such as "=srcsum(srcref2(), srcref3())".

Ideally I could then use this same funtion anywhere instead of having to use and worry about the accuracy of "=srcsum($a$2,$b$1)"."=srcsum($a$3,$b$1)"."=srcsum($a$4,$b$5)".etc.

It seems like there should be a current cell method or something but I can't find it and I'm not smart enough it seems to use vb to designate some kind of floating intersect as a base for a row and column reference.

I'm creating a chart that will show a running average of a set of values. First column has the values and the second is a running average. Here's my sample data:

55.0

65.5

8732.7

425.5

521.4

8832.5

528.6

826.0

423.6

My formula for the second column is as follows, =AVERAGE($G$1:G1), =AVERAGE($G$1:G2)... and so on.'

My problem is when I try to run the same formula on a different worksheet to put on the current worksheet, I get an error from Excel that the formula is invalid. Here's the formula I use, =AVERAGE('Team Stats'!$A$I1:AI1), =AVERAGE('Team Stats'!$A$I1:AI2), ...

Is this a bug with Excel? Is the format wrong? I've tried just using the function wizard and it tells me that the absolute reference is invalid.

I've been testing the countif function and for some reason it isn't working for me.

I have the following text in cells A1:A3

"apple"

"banana"

"peach"

I have the following text in cells C1:C3

"apricot"

"banana"

"grape"

I put the following formula in B1 and copied down into B2 and B3.

=COUNTIF($C$1:$C$3,A1)

It is meant to count how many of each fruit in A1:A3 is also in C1:C3.

The banana is the only one that is in both lists so the formula in B2 should return 1.

But all three formula's return zero.

If I change the range in the countif formula to relative it works. eg., =COUNTIF(C1:C3,A1)

I am migrating a bookkeepping spreadsheet from Quattro v12 (c2001) to Excel 2007 and have hit a stone wall over relative 3-D references.

In this workbook each sheet holds data for one month, and this includes some lagging-12-month calculations -- that is, summing a range on a single cell for the preceding 12 sheets (including this one).

Unexpectedly, this formula:

=ISUM('201206:201305'!M6)

gives absolute references, even though I put in no dollar signs after the sheet names. This means it gives the wrong answer when copied to the next sheet to start a new month.

I can find no reference at all to converting the above formula from absolute to relative reference.

I am creating a spreadsheet which creates a bulk of data from a front sheet.

The question is:

Is there a way to automatically copy a fixed formula for 100 cells using one fixed cell reference such as $A$1 and then automatically after 100 cells replace $A$1 with $A$2, after another 100 with $A$3 and so on?

Explanation with Example:

For example, Sheet1 contains the words "Green Tree" in Cell A1 and Sheet2 will then place "Green Tree" into 100 different sentences such as:

Plant a Green Tree

Grow a Green Tree today

This would be created with the formula ="Grow a "&'Sheet1'!$A$1& " today"

After 100 different variations using the formula I want to change that formula to reference cell A2 on Sheet1.

I know if I place "Red Tree" in Cell A2 and use the formula ="Grow a "&'Sheet1'!$A$2& " today" I can do this manually using find and replace for the 100 cells, but I want to do this for 100 different variations of Green Tree to create a 10,000 different sentences so I'd need to find and replace 100 times!

I have lets say 12 months of data. I have formulas that reference the latest 6 months. When I insert a new column to input a new month, how can I make the formulas include the new months without manually updating them.

EXAMPLE:

12 months of data exist in cells B3:M3 going from B3(oldest) to M3(newest). Formulas reference latest 6 months of data in cells H3:M3. When a new month hits, I insert a column after column M.I would like the formulas to now reference cells I3:N3 which is now the newest 6 months.

I have a workbook with 1000+ worksheets, all of which have 3-letter names. On a master sheet, I would like to make a query of how many non-empty cells there are on a subsidiary worksheet. This works:

Code:

=COUNTA(ABC!A:A)

What I'd like to do from time to time is input in column A a varying set of 3-letter worksheet names, say

AAB

ABC

CDE

And have a formula in column B that converts this to

=COUNTA(AAB!A:A)

=COUNTA(ABC!A:A)

=COUNTA(CDE!A:A)

I've learned that simply substituting the cell references A1, A2, A3 for AAB, ABC and CDE doesn't work. What do I need to do to achieve this?

I have a worksheet that uses a lot of vlookups and I have to update the filenames and locations quite often. I would like to update a single cell rather than updating every single formula.

However I am getting the #VALUE error when trying this.

Simplified Example:

I have: =VLOOKUP(A3,[Table.xls]Sheet1!$A$1:$B$4,2,FALSE)

I would like to place [Table.xls]Sheet1!$A$1:$B$4 into a cell (D1) for example.

And have my vlookup function as =VLOOKUP(A3,$D$1,2,FALSE)

This way I only have to update D1 when I want to change the filename instead of a whole lot of functions.

Sheet 1 contains:

Item Sheet 2

ABC =vlookup(A2,'Sheet 2'!$A:$B,2,false)

Sheet 2 contains:

Item Data

ABC 2

I'm trying to get the vlookup to return the value "2"

Right now, I'm manually entering the tab name in the vlookup function, even though it's contained in cell B1.

The tabs are contained in the same workbook if that matters. Since this workbook is growing rather quickly, this is a painful process and doesn't feel very scalable. Since I'm using a mac, I need to do this with functions vs. macros. Does anybody know how I can reference a cell for the name of a tab in the vlookup function?

I was thinking I could maybe somehow do this with the INDIRECT function but I'm stumped.

Copyrights 2005-15 www.BigResource.com, All rights reserved