I am trying to change the property value of all optionbuttons on userform1 via userform2's deactivate event
Private Sub UserForm2_Deactivate()
If userform1.Controls = OptionButton Then
Value = False
End If
End Sub
I want to access the Properties of a number of controls in a running form, and these controls may or may not be contained in a Frame or a MultiPage.
In particular I want the Top and Left for these controls, which means I have to first find out if the control is contained in a Frame or MultiPage so I can get the reference for Top and Left. I'm ok with doing this for controls inside a Frame, but the MultiPage is eluding me. I get an error when I try to access these controls and it looks like they are actually owned by the individual Pages of the MultiPage.
how do I find out if a given control is contained in a given MultiPage?
Validate UserForm MultiPage and Frame Controls
I have a userform that has nested multipages (5 in the outer page, 4 in the inner page).
On each of these multipages, I want to have the same controls (sliders) laid out in the same order - but with unique names, named after their tab location, for each control so I can use their value property later in the code.
I've designed the layout and named all the controls on my first sheet (e.g. Slider1Outer1Inner1). I now need a way of automating the replication of these across the other 19 sheets (including the nested inner multipage!); so that equivalent slider for example would be called Slider1Outer1Inner2, Slider1Outer1Inner3 etc.
I'm not sure about coding VBA to act on items within VBA...
VB:
" For each multipage in outer
For Each multipage In inner
For Each Object In current multipage
Copy inner.object -> Next multipage
Inner.object.name = CurrentOuter & CurrentInner & CurrentSlider "
What's the best way to hide controls on a userform? I have a userfrom with 2 datepicker one for start date and one for end date. I want them hidden until I use checkbox and check it to appear. I am using this code but nothing is work.
View 2 Replies View RelatedI have taken this code from Access and trying to use it in Excel to lock all the TextBox, ComboBox & CheckBox on the form.
View 2 Replies View RelatedHow to disable different parts of a userform?
I dont really want to go through each control as I reckon it will be handy code to have in the future if I need to add more but so far my code is:
Private Sub UserForm_Activate()
With Sheet2
n = 3
[Code].....
I have a number of TextBoxes across the page, all set to Visible=False.
If these get filled with data then I need to set Visible=True.
Rather than hard code this individually for each one (which is not a problem, it just looks untidy), can I select each row as a Group (whilst designing the form, not in the code) and then set that Group to Visible=True ?
I have a userform that contains several textboxes, checkboxes, and comboboxes. There are also some command buttons, one of which says clear all. What I want to do is loop through the controls and clear the contents or change the value to false, depending on the type. I can do this by type the name.value = "", but there are alot of controls. If possible, a loop would be much more effecient.
View 9 Replies View RelatedI am trying to create some controls in a userform on the fly based on the data in a sheet. The part of my code is the following:
summaryForm.Controls.Add bstrProgID:="forms.label.1", Name:="LAWts", Visible:=True
With summaryForm.Controls("LAWts")
.Top = 120
.Left = 20
.Height = 18
.Width = 300
.Caption = "Weights: "
End With
Question I is that how can I connet this textbox to a click event or just to a procedure when it is clicked? I tried to use OnAction but it does not work for textbox in a userform. Question II is that how can I find the all properties of a textbox or any other controls? Is there a manuel or reference available on the internet?
What are the pros/cons of using Userforms with the various objects (comboboxes, textboxes,etc) compared to putting the controls at the worksheet level? Are there things you can do in one and not the other?
View 2 Replies View RelatedI am trying to transfer data from a worksheet to a user form, so that the end users can edit the data on the user form, save it, and the revised data is sent back to the worksheet. since the worksheet data is dynamic, i am trying to dynamically add controls in the user form. but the form displays only one data.
Set sdel = Sheets("Deliverables")
Set rStartCell = sdel.Range("A65536").End(xlUp).Offset(0, 0)
counter = Mid(rStartCell.Address, 4)
dummy = 0
cnt = 1
'copy data from sheet to the user form
With sdel
'checking if deliverables sheet has any data
' If .Range("A3") <> " " Then Exit Sub
' MyTextBox.Caption = .Range("A3").Value
For r = 3 To counter
If .Cells(r, 1) <> "" Then
Set MyTextBox = Controls.Add("Forms.Label.1", "lbl" & cnt, Visible)
MyTextBox.Top = topadd + 30
MyTextBox.Left = 20
MyTextBox.Width = 150
MyTextBox = .Range("A" & r).Value
cnt = cnt + 1
Else
dummy = dummy + 1
End If
Next r
End With
I have a userform with a series of textboxes used for data entry (numeric values) specifically, 3 groups with 5 text boxes per group. If the value of any text box within a group is either >= the value of a cell in a worksheet range (Benchmark, i.e. BM), then the BackColor of that particular text box changes to green.
The challenge I have is trying to loop through each set of five controls to determine if the control's value is >= to the cell's value in the worksheet range, and if that condition is met, than changing the BackColor to green.
I know there must be a more efficient way to make this happen than to write an 'If - Then' for each text box (see code below)
Private Sub Benchmarks()
BM1 = Worksheets("Sheet 1").Range("A1").Value
BM2 = Worksheets("Sheet 1").Range("A2").Value
If txtGroup1Box1.Value <> "X" And txtGroup1Box1.Value <> "" And txtGroup1Box1.Value <= BM1 Then
txtGroup1Box1.BackColor = &HFF00&
Else
txtGroup1Box1.BackColor = &H80000005 ............................
i build a userform that includes 6 columns, and use named range to to be shown in the userform.
i use simple code to call this userform.
excuting the code, the userform appears ok.
i saved my file as an addin to be able to call my userform
the problem that the userform appears empty, no data and no columns, when calling the userform from the addin file whearas the userform works fine with the named range when calling from an xls file.
any idea how to solve the problem ?
pls find the attached file
File deleted as it of no help.
way to allow a user to add a control to a userform without going into the VBE. Here is the situation, I am developing a userform to calculate a projected budget. I want the user to be able to select the number of controls to add, and click a command button to add them. Based on other selections that the user makes, different controls would automatically be added. Is this possible? As a follow up, will I be able to atttach code to these new controls?
View 9 Replies View RelatedOn the event that a combobox is changed the objects on my userform that relate to the same information as the combobox need to be disabled (and made invisible)... however if another choice is made then they need to be enabled again and then the objects relating to the new selection need to be disabled.
Private Sub cbo1_Change()
Dim DisableIndex As Integer
Dim CellAddress As String
Worksheets("Matrix").activate
ActiveSheet. Range("B1").Select
Do
If ActiveCell.Value <> cboVarNamEn.Value Then
ActiveCell.Offset(0, 1).Select
End If
Loop While ActiveCell.Value <> cboVarNamEn.Value
CellAddress = ActiveCell.Address(ReferenceStyle:=xlA1)
ActiveSheet.Range("B1:" & CellAddress).Select
DisableIndex = Selection.Cells.Count
Me.FrameAddEn.Controls("label" & DisableIndex).Enabled = False
Me.FrameAddEn.Controls("label" & DisableIndex).Visible = False
'there a few other objects here that will also be disabled... text boxes, check boxes etc.
Putting an unload/load command in won't work for obvious reasons and I can't use a command button because that would require my clients to actually think of pressing it.
I have a MultiPage userform and I'm adding (4) control buttons - CancelButton, BackButton, ForwardButton and FinishButton. On the first page, those names are fine but when I get to subsequent pages, I get an ambiguous error if I try to name the controls the same. But the code will all be the same. What am I missing? In an example that I have, the user was able to name all the controls with the same name. What setting would control that?
View 5 Replies View RelatedMy userform has a group of controls, four navigation buttons and a textbox. The nav. buttons have accelerator keys, Alt+N for next record and so on. I was moving the group about on a userform, when hey presto! it suddenly disappeared. When I run the form, the navigation buttons do not appear, but I can still navigate using Alt+N, Alt+P. Here's what I've done so far, trying to find out what's going on.
* I selected all controls with Ctrl+A, but there was no sign of any object in the place where the missing group should have been.
* I looked on the Object Browser (which is something I don't understand too well yet) and the navigation buttons are there.
* I hid all the controls, and showed them again, didn't help.
* The group I was moving was near the bottom of the form. I set the zoom property of the form to 50, so all controls in design view were bunched up near the top left corner; the missing group didn't appear
The form that I have created has a number of controls that are created at runtime. If a user triggers the event that originally created the controls, I want to be able to delete all of the controls before recreating them.
Is there a loop that can delete all of the newly created controls? I have 9 controls on the form that need to stay put but everything after those 9 controls I want to delete. Is there something like:
I have a userform with 24 text and combo boxes. Aside from using the enter and exit events, is there an easy way to have the active text/combo box be highlighted in a color?
View 9 Replies View RelatedI am trying to calculate the result of two text boxes in a third textbox on a userform.
Box1 = DirectorHrs = a textbox that the user enters the number of hours
Box2= DirectorRate = a textbox that retrieves the rate from a sheet called "Rates" within the workbook upon initialise of userform.
Box3 = DirectorTotal = Box1*Box2. I want this to update when the user enters or changes Box1.
I have the following code on the change event of Box1
Private Sub DirectorHrs_Change()
DirectorTotal.Value = CStr(Val(DirectorRate.Value) * Val(DirectorHrs.Value))
End Sub
I've created several UserForms, for some reason this one won't co-operate!
Issue are:
1. Have to click the OK button 3 times for the code to execute (this does not occur when I filter through the code in debug/F8 mode).
2. Before processing I have a label and image set to visible = true that won't appear on the form at runtime (this works when I filter through the code in debug/F8 mode).
I'm making a form in excel to retrieve a number of welds. This number needs to be passed on to the next form to dynamically create an identical number of input fields (a set of text boxes and labels essentially). Any ideas on how I might do this? Is it even possible? I would like to avoid having 100 (my assumed maximum, it could get changed) sets of input fields and hiding the unused ones,
View 9 Replies View RelatedI want to create a user form to allow users to put in 26 values and then have the values populate certain cells within the spreadsheet.
I have attached a sample, I know how to create the form, I'm just not sure of the coding I would need to use?
I have an Excel userform that has 10 textboxes named, say, tbLabel1, tbLabel2, ... tbLabel10. They are all disabled in the beginning. Then I have a question for the user "how many labels you want" and another textbox for the answer. If the user entered, say, 6 as the answer, I want enable the first 6 textboxes, tbLabel1 - tbLabel 6. I tried using
For I=1 To tbHowMany.value
tbLabel & I.Enabled = True
Next I
The code listed below checks to see if any checkboxes are checked via a form and if they are then populate a string variable with text to build out a range to be used for a Defined Name Range in excel. The code works but I was wondering if the same functionality could be written better.
Private Sub cmbRun_Click()
Dim SelectedRange As String
If CheckBoxML.Value = True Then
SelectedRange = "Revenue!$M:$M"
Goto jump1
Else
If CheckBoxML.Value = False Then
Goto jump1
jump1:
If CheckBoxSL.Value = True Then
SelectedRange = SelectedRange & ",Revenue!$N:$N"
Goto jump2
Else...............................
I have a userform with fields (TextBoxes) Num1, Num2, Num3, Num5 and Num5
I also have an array which i have looped through and seeded with five values.
Now when I try and loop again and pass the values from the array to each of the textboxes I cant remember the syntax to reference the textbox using the loop variable - Num(var). I've experimented with the & symbol but it escapes me at the moment !
I am creating a form that i want to maximse to the full screen when loaded. I have checked out a previous post
Private Sub UserForm_Initialize()
Me.StartUpPosition = 2 '(center on screen)
Me.Height = Application.Height
Me.Width = Application.Width
End Sub
Im using the following code on a userform to link the spinner and a textbox:
Private Sub Marketing_spn1_Change()
'ensures the text box changes when spinner is changed
Marketing_txt1.Text = Marketing_spn1.Value
End Sub
Private Sub Marketing_txt1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
' ensure value typed in is valid
newvalue = Round(Val(Marketing_txt1.Text), 0)
If newvalue < Marketing_spn1.Min Then newvalue = Marketing_spn1.Min
If newvalue > Marketing_spn1.Max Then newvalue = Marketing_spn1.Max
' set the spinner value to keep in step with new value
Marketing_spn1.Value = newvalue
' set the textbox to the appropriate value
Marketing_txt1.Value = newvalue
End Sub
I have many spinners and textboxes with the same name (marketing_txt2, marketing_spn3 etc) on both this userform and on other userforms I shall be doing.
Is there any way of just writing this code once, rather than copying and pasting it for each spinner/textbox?
I need some code that will do the following in a UserForm:
If option1 is selected = textbox1 is visible, textbox2/combo1 is hidden
If option2 is selected = textbox2 is visible, textbox1/combo1 is hidden
If option3 is selected = combobox1 is visible, textbox1/textbox2 is hidden
I am planning to set a RESET(command button) button in my userform,so that user can delete or change all the input data which she/he have been entered,back to the default one that I predefined.
View 5 Replies View Related